Team:Amsterdam/Notebook/Protocols/Making Competent Cells

• Home
• Team
  • Students
  • Advisors
  • Lab Environment
• Project
  • Description
  • Modules
  • Data Page
  • Safety
  • Applications
  • Attributions
  • Acknowledgements
• BioBricks
  • Overview
  • Basic Parts
  • Composite Parts
• Labwork
  • Notebook
  • Protocols
  • Characterization
  • Data Analysis
• Human Outreach
  • Collaboration
  • Education
  • Media
• Sponsors
  • Companies
  • Help Us

Preparation of chemically competent cells

Overview

We use a slightly modified version of the chemical transformation protocol used by the [http://partsregistry.org/Help:Protocols/Competent_Cells Registry of Standard Biological Parts].
This protocol is a variant of the [http://www.ncbi.nlm.nih.gov/pubmed/1943786?dopt=Abstract Hanahan protocol] using CCMB80 buffer for DH10B, TOP10 and MachI strains. It builds on Example 2 of the [http://openwetware.org/images/b/bd/Pat6855494.pdf Bloom05 patent] as well. This protocol has been tested on NEB10, TOP10, MachI and [http://openwetware.org/wiki/Talk:TOP10_chemically_competent_cells BL21(DE3)] cells. See [http://openwetware.org/wiki/Bacterial_Transformation OWW Bacterial Transformation page] for a more general discussion of other techniques. The [http://openwetware.org/images/c/c2/Pat6709852.pdf Bloom04] patent describes the use of essentially the same protocol for the Invitrogen Mach 1 cells. The [http://openwetware.org/images/0/0c/Pat6960464.pdf Jesse '464 patent] describes using this buffer for DH5α cells. Unfortunately, we have found the competence of DH5α to be far lower when compared to TOP10.

Materials

• Detergent-free, sterile glassware and plasticware. We use dedicated centrifuge tubes that are only used for preparation of competent cells
• Table-top OD600nm spectrophotometer
• SOB
• CCMB80 buffer (see below)

CCMB80 buffer

• 10 mM KOAc pH 7.0 (10 ml of a 1M stock/L)
• 80 mM CaCl₂.2H₂O (11.8 g/L)
• 20 mM MnCl₂.4H₂O (4.0 g/L)
• 10 mM MgCl₂.6H₂O (2.0 g/L)
• 10% glycerol (100 ml/L)
• adjust pH DOWN to 6.4 with 0.1N HCl if necessary
  • adjusting pH up will precipitate manganese dioxide from Mn containing solutions.
• sterile filter and store at 4°C
• slight dark precipitate appears not to affect its function

Procedure

Prechill plasticware and glassware

Prechill 250mL centrifuge tubes and screw cap tubes before use.

Preparing seed stocks

• Prepare TOP10 preculture by scraping a -80d°C TOP10 glycerol stock into 3ml of LB medium and shake overnight at 37°C

Preparing competent cells

• Inoculate 250 ml of SOB medium with 1 ml vial of seed stock and grow at 20°C to an OD600nm of 0.3
  • This takes approximately 16 hours.
  • Controlling the temperature makes this a more reproducible process, but is not essential.
  • Room temperature will work. You can adjust this temperature somewhat to fit your schedule
  • Aim for lower, not higher OD if you can't hit this mark
• Centrifuge at 3000g at 4°C for 10 minutes in a flat bottom centrifuge bottle.
  • Flat bottom centrifuge tubes make the fragile cells much easier to resuspend
  • It is often easier to resuspend pellets by mixing before adding large amounts of buffer
• Gently resuspend in 80 ml of ice cold CCMB80 buffer
  • sometimes this is less than completely gentle. It still works.
• Incubate on ice 20 minutes
• Centrifuge again at 4°C and resuspend in 10 ml of ice cold CCMB80 buffer.
• Test OD of a mixture of 200 μl SOC and 50 μl of the resuspended cells.
• Add chilled CCMB80 to yield a final OD of 1.0-1.5 in this test.
• Incubate on ice for 20 minutes
• Aliquot to chilled screw top 2 ml vials or 50 μl into chilled microtiter plates
• Store at -80°C indefinitely.
  • Flash freezing does not appear to be necessary
• Test competence (see below)
• Thawing and refreezing partially used cell aliquots dramatically reduces transformation efficiency by about 3x the first time, and about 6x total after several freeze/thaw cycles.

Measurement of competence

• Transform 50 μl of cells with 1 μl of standard pUC19 plasmid (Invitrogen)
  • This is at 10 pg/μl or 10^-5 μg/μl
  • This can be made by diluting 1 μl of NEB pUC19 plasmid (1 μg/μl, NEB part number N3401S) into 100 ml of TE
• Hold on ice 0.5 hours
• Heat shock 60 sec at 42C
• Add 250 μl SOC
• Incubate at 37 C for 1 hour in 2 ml centrifuge tubes rotated
  • using 2ml centrifuge tubes for transformation and regrowth works well because the small volumes flow well when rotated, increasing aeration.
  • For our plasmids (pSB1AC3, pSB1AT3) which are chloramphenicol and tetracycline resistant, we find growing for 2 hours yields many more colonies
  • Ampicillin and kanamycin appear to do fine with 1 hour growth
• Plate 20 μl on AMP plates using sterile 3.5 mm glass beads
  • Good cells should yield around 100 - 400 colonies
  • Transformation efficiency is (dilution factor=15) x colony count x 10⁵/µgDNA
  • We expect that the transformation efficiency should be between 5x10⁸ and 5x10⁹ cfu/µgDNA

5x Ligation Adjustment Buffer

• Intended to be mixed with ligation reactions to adjust buffer composition to be near the CCMB80 buffer
• KOAc 40 mM (40 ml/liter of 1 M KOAc solution, pH 7.0)
• CaCl₂ 400 mM (200 ml/l of a 2 M solution)
• MnCl₂ 100 mM (100 ml/l of a 1 M solution)
• Glycerol 46.8% (468 ml/liter)
• pH adjustment with 2.3% of a 10% acetic acid solution (12.8ml/liter)
  • Previous protocol indicated amount of acetic acid added should be 23 ml/liter but that amount was found to be 2X too much per tests on 1.23.07 --Meagan 15:50, 25 January 2007 (EST)
• water to 1 liter
• autoclave or sterile filter
• Test pH adjustment by mixing 4 parts ligation buffer + 1 part 5x ligation adjustment buffer and checking pH to be 6.3 - 6.5

• Reshma P. Shetty 10:49, 11 February 2008 (CST): Use of the ligation adjustment buffer is optional.

References

1. Hanahan91 pmid=1943786
2. Reusch86 pmid=3536850
3. Addison04 pmid=15470891
4. Bloom04 US Patent 6,709,852 [http://openwetware.org/images/c/c2/Pat6709852.pdf pat6709852.pdf]
5. Bloom05 US Patent 6,855,494 [http://openwetware.org/images/b/bd/Pat6855494.pdf pat6855494.pdf]
6. Jesse05 US Patent 6,960,464 [http://openwetware.org/images/0/0c/Pat6960464.pdf pat6960464.pdf]

iGEM Amsterdam 2011 is powered by:

---

---

Back to the Top