Team:Bielefeld-Germany/Protocols/Downstream-processing

From 2011.igem.org

(Difference between revisions)
(Ni-NTA spin columns)
Line 19: Line 19:
* Cultivation temperature: 37 °C at 120 rpm
* Cultivation temperature: 37 °C at 120 rpm
 +
 +
===Expression of bisphenol A degrading BioBricks in ''E. coli''===
===Expression of bisphenol A degrading BioBricks in ''E. coli''===
Line 41: Line 43:
* for characterizations: automatic sampling every three hours with Gilson fraction controller F2XX cooled (< 4 °C) with Julabo F10 water bath <html><a href="http://www.abrf.org/index.cfm/list.msg/abrf/23205" style="color:white">BURMA-SHAVE!!</a></html>
* for characterizations: automatic sampling every three hours with Gilson fraction controller F2XX cooled (< 4 °C) with Julabo F10 water bath <html><a href="http://www.abrf.org/index.cfm/list.msg/abrf/23205" style="color:white">BURMA-SHAVE!!</a></html>
** the characterization experiment setup is shown on the picture on the right
** the characterization experiment setup is shown on the picture on the right
 +
Line 65: Line 68:
* Harvest after 13 h
* Harvest after 13 h
 +
 +
==Purification methods==
==Purification methods==
Line 120: Line 125:
* Arrange the filtration module as shown on the right side.  
* Arrange the filtration module as shown on the right side.  
-
* Microfiltration (0.22 µm) or cross flow filtration 300 kDa (we used a Milipore Pellicon XL 300) membrane of sample before ultrafiltration.
+
* Microfiltration (0.22 µm) or cross flow filtration with 300 kDa (we used a Milipore Pellicon XL 300) membrane of sample before ultrafiltration.
* For concentrating the sample just filter it until the desired volume is left in the feed reservoir. For diafiltration (e.g. buffer exchange, desalting) dilute the feed reservoir several times and filter continously.  
* For concentrating the sample just filter it until the desired volume is left in the feed reservoir. For diafiltration (e.g. buffer exchange, desalting) dilute the feed reservoir several times and filter continously.  
Line 132: Line 137:
* Used pump: SciLog TANDEM 1081 peristaltic pump
* Used pump: SciLog TANDEM 1081 peristaltic pump
** flow rate during filtration: 40 mL min<sup>-1</sup>
** flow rate during filtration: 40 mL min<sup>-1</sup>
 +
 +
===Ion exchange chromatography (IEX) for S-layer proteins from ''Corynebacterium''===
===Ion exchange chromatography (IEX) for S-layer proteins from ''Corynebacterium''===
-
* used column: DEAE HiTrap 1 mL with GE Healthcare ÄKTA
+
* used column: DEAE HiTrap 1 mL with [[http://www.gelifesciences.com/aptrix/upp01077.nsf/Content/aktadesign_platform~akta_primeplus GE Healthcare ÄKTAprime™ plus]]
* flow rate: 1 mL min<sup>-1</sup>
* flow rate: 1 mL min<sup>-1</sup>
-
* equilibrate column with 5 column volumes of [[Team:Bielefeld-Germany/Protocols#Buffers_for_S-layer_IEX | binding buffer]]
+
* equilibrate column with 10 column volumes of [[Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_S-layer_IEX | binding buffer]]
-
* inject sample and wash column with 5 column volumes of binding buffer
+
* inject sample and wash column with binding buffer
-
* elute with 40 % [[Team:Bielefeld-Germany/Protocols#Buffers_for_S-layer_IEX | binding / elution buffer]] mix
+
* elute with 20 %, 40 % and 60 % of [[Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_S-layer_IEX | binding / elution buffer]] mix and collect fractions
-
* elute S-layer with 60 % elution buffer
+
* elute remaining proteins with 100 % elution buffer
* elute remaining proteins with 100 % elution buffer
 +
===His-tag affinity chromatography===
===His-tag affinity chromatography===
Line 153: Line 160:
'''denaturing'''
'''denaturing'''
-
*For buffers see Table [https://2011.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography  buffers for his-tag affinity chromatography]
+
*For buffers see table [https://2011.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography  buffers for his-tag affinity chromatography]
*Mechanical lysis:
*Mechanical lysis:
-
**Sonication on ice for approx. 5 min with Sonifier 450 by [http://www.gehealthcare.com/ Branson]
+
**Sonification on ice for approx. 5 min with Sonifier 450 by [http://www.gehealthcare.com/ Branson]
*Centrifuge at 10000 ''g'' for 30 min at 4 °C
*Centrifuge at 10000 ''g'' for 30 min at 4 °C
*Load sample onto the column
*Load sample onto the column
-
*Wash with 10 ml binding buffer
+
*Wash with 10 mL binding buffer
*Elute with 5 mL of elution buffer with increasing imidazole concentrations
*Elute with 5 mL of elution buffer with increasing imidazole concentrations
*Collect the eluate in 1 mL fractions, the purified protein is most likely in the second or third fraction
*Collect the eluate in 1 mL fractions, the purified protein is most likely in the second or third fraction
Line 164: Line 171:
   
   
'''non-denaturing'''
'''non-denaturing'''
-
*For buffers see Table [https://2011.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography  buffers for his-tag affinity chromatography]
+
*For buffers see table [https://2011.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography  buffers for his-tag affinity chromatography]
*Enzymatic lysis:
*Enzymatic lysis:
-
**Add 0.2 mg L<sup>-1</sup> lysozyme, 3 Units Benzonase per mL of culture volume and 1 mM MgCl<sub>2</sub>
+
**Add 0.2 mg L<sup>-1</sup> lysozyme, 3 units of Benzonase per mL of culture volume and 1 mM MgCl<sub>2</sub>
-
**Stir for 30 min at 4 °C
+
**Stirr for 30 min at 4 °C
*Centrifuge at 10000 ''g'' for 30 min at 4 °C
*Centrifuge at 10000 ''g'' for 30 min at 4 °C
*Load sample onto the column
*Load sample onto the column
Line 282: Line 289:
[[Image:Bielefeld-Germany2011-CH4-Aufreinigung_symbol.png|800px|center]]
[[Image:Bielefeld-Germany2011-CH4-Aufreinigung_symbol.png|800px|center]]
 +
==Recrystallization of S-layer proteins==
==Recrystallization of S-layer proteins==
 +
 +
 +
 +
===Recrystallization of SgsE and SbpA in solution===
 +
 +
* after purification: dialyse 18 h at 4 °C against ddH<sub>2</sub>O in the dark
 +
 +
* centrifuge and use supernatant -> this is the monomeric protein solution
 +
 +
* dialyse 18 h at 4 °C against
 +
** HBSS pH 7.4 for SgsE and
 +
** recrystallization buffer (0.5 mM Tris-HCl, pH 9, 10 mM CaCl<sub>2</sub>) for SbpA
===Immobilization of SgsE on silica beads===
===Immobilization of SgsE on silica beads===
-
* after purification: dialyse 18 h at 4 °C against MiliQ
+
* after purification: dialyse 18 h at 4 °C against ddH<sub>2</sub>O in the dark
-
* centrifuge and take supernatant -> this is the monomeric protein solution
+
* centrifuge and use supernatant -> this is the monomeric protein solution
* measure protein concentration
* measure protein concentration
Line 298: Line 318:
* suspend silicium dioxide beads in '''HBSS''' (pH 7.4) and mix it with the 1 mg mL<sup>-1</sup> S-layer solution
* suspend silicium dioxide beads in '''HBSS''' (pH 7.4) and mix it with the 1 mg mL<sup>-1</sup> S-layer solution
** ratio of beads to protein can be varied
** ratio of beads to protein can be varied
-
** 0.1 mg mL<sup>-1</sup> final protein concentration in
+
** 0.1 mg mL<sup>-1</sup> final protein concentration
** contact with HBSS buffer will start assembly of SgsE  
** contact with HBSS buffer will start assembly of SgsE  
-
* incubate on vertical rotator at room temperature
+
* incubate on vertical rotator at room temperature for 4 h
* after incubation: centrifuge down the beads (1 min, > 15,000 g), wash them twice with ddH<sub>2</sub>O and store them afterwards in ddH<sub>2</sub>O at 4 °C in the dark
* after incubation: centrifuge down the beads (1 min, > 15,000 g), wash them twice with ddH<sub>2</sub>O and store them afterwards in ddH<sub>2</sub>O at 4 °C in the dark
 +
===Immobilization of SbpA on silica beads===
===Immobilization of SbpA on silica beads===
-
* after purification: dialyse 18 h at 4 °C against MiliQ
+
* after purification: dialyse 18 h at 4 °C against ddH<sub>2</sub>O in the dark
* centrifuge and take supernatant -> this is the monomeric protein solution
* centrifuge and take supernatant -> this is the monomeric protein solution
Line 321: Line 342:
** contact with recrystallization buffer will start assembly of SbpA
** contact with recrystallization buffer will start assembly of SbpA
-
* incubate on vertical rotator at room temperature
+
* incubate on vertical rotator at room temperature for 4 h
* after incubation: centrifuge down the beads (1 min, > 15,000 g), wash them twice with ddH<sub>2</sub>O and store them afterwards in ddH<sub>2</sub>O at 4 °C in the dark
* after incubation: centrifuge down the beads (1 min, > 15,000 g), wash them twice with ddH<sub>2</sub>O and store them afterwards in ddH<sub>2</sub>O at 4 °C in the dark

Revision as of 21:09, 20 September 2011

Production Protocols: These are the protocols for the cultivation and the downstream processing.

Contents

Cultivation

Expression of [http://expasy.org/sprot/hamap/CORGL.html Brevibacterium flavum] and [http://ijs.sgmjournals.org/cgi/content/abstract/54/3/779 Corynebacterium halotolerans] S-layer genes in E. coli

  • Used BioBricks: <partinfo>K525131</partinfo>, <partinfo>K525133</partinfo>, <partinfo>K525231</partinfo>, <partinfo>K525232</partinfo>, <partinfo>K525233</partinfo>, <partinfo>K525234</partinfo>, <partinfo>K525304</partinfo>, <partinfo>K525305</partinfo>, <partinfo>K525306</partinfo>, <partinfo>K525406</partinfo>, <partinfo>K525323</partinfo>
  • Chassis: Promega's [http://www.promega.com/products/cloning-and-dna-markers/cloning-tools-and-competent-cells/bacterial-strains-and-competent-cells/single-step-_krx_-competent-cells/ E. coli KRX]
  • Medium: LB medium supplemented with 20 mg L-1 Chloramphenicol or autoinduction medium
    • Cultivations in LB-medium were supplemented with 0,1 % L-rhamnose as inducer, when the designated OD600 was reached.
    • Autoinduction medium for expressing <partinfo>K525304</partinfo>, <partinfo>K525305</partinfo>, <partinfo>K525306</partinfo>, <partinfo>K525406</partinfo>, <partinfo>K525323</partinfo> was supplemented with 1 mM IPTG.
  • 150 mL culture in 500 mL shaking flask with baffles (Schott) with silicon plugs
  • Cultivation temperature: 37 °C at 120 rpm


Expression of bisphenol A degrading BioBricks in E. coli


  • Used BioBricks: <partinfo>K525502</partinfo>, <partinfo>K525512</partinfo>, <partinfo>K525517</partinfo>, <partinfo>K525552</partinfo>
  • Chassis: Promega's [http://www.promega.com/products/cloning-and-dna-markers/cloning-tools-and-competent-cells/bacterial-strains-and-competent-cells/single-step-_krx_-competent-cells/ E. coli KRX]
  • Medium: LB medium supplemented with 100 mg L-1 Ampicillin and 120 mg L-1 bisphenol A
    • BPA is thermally stable -> you can autoclave it together with the medium
  • 100 mL culture in 300 mL shaking flask without baffles (Schott) with silicon plugs
  • Cultivation temperature: 24 °C, 30 °C or 37 °C, tempered with Infors AG AQUATRON at 120 rpm
  • for characterizations: automatic sampling every three hours with Gilson fraction controller F2XX cooled (< 4 °C) with Julabo F10 water bath BURMA-SHAVE!!
    • the characterization experiment setup is shown on the picture on the right


Bioreactor cultivations with E. coli KRX

To obtain higher amounts and concentration of proteins we cultivated and expressed in a bioreactor. It is possible to cultivate several liters and to control temperature, pH and DO.


  • Bioreactor: [http://www.bioengineering-inc.com/standard-reactors.php?id=2.1 Bioengineering NLF22 7 L] with Bioengineering DCU
  • Culture volume: 4 L
  • Starting OD600: 0.2
  • DO: 40 % airsaturation (controlled with stirrer cascade starting with 200 rpm)
  • pH: 7.0 (controlled with 20 % phosphoric acid and 2 M NaOH)
  • Antifoam: BASF pluronic XXX
  • Induction after 4 h cultivation time with 2 % rhamnose (in culture medium)
  • Harvest after 13 h


Purification methods

Release of periplasmic protein fraction from E. coli by cold osmotic shock

Modified protocol from [http://www.jbc.org/content/240/9/3685.full.pdf+html?sid=4a90c176-0ec3-489f-8c82-4734274cebf5 Neu & Heppel, 1965].

  • Centrifuge E. coli cell suspension for 5 min at 14000 g (4 °C) to collect the cells.
  • Discard the entire supernatant.
  • Resuspend the cells ice-cold cell fractionating buffer #1. The resulting volume should be 1/4 of the former suspension volume.
  • Incubate for 20 min on ice. Ivert the suspension at regular intervals to counteract sedimentation.
  • Centrifuge the cell suspension for 15 min at 14000 g (4 °C).
  • Discard the entire supernatant.
  • Resuspend the cells ice-cold cell fractionating buffer #2. The resulting volume should be 1/4 of the former suspension volume.
  • Incubate for 10 min on ice under regular invertion.
  • Centrifuge the cell suspension for 15 min at 14000 g (4 °C).
  • Save the supernatant, which contains the periplasmatic proteins.
  • If the periplasmatic protein fraction is turbid, re-centrifuge and filter it through a 0.2 µm filter.


Inclusion body clean-up

  • harvest the cells by centrifugation (30 min, 10,000 g, 4 °C)
  • resuspend pellet and disrupt cells
  • centrifuge lysate (60 min, >17,000 g, 4 °C)
  • wash pellet at least two times with water to remove water-soluble proteins
  • after washing the pellet: incubate the pellet in denaturation buffer for 60 min, 4 °C with vertical rotator
    • final concentration in denaturation buffer: 0.5 mg wet biomass per mL
  • centrifuge (60 min, >17,000 g, 4 °C)
    • the higher the speed, the better the result
  • collect supernatant and incubate the pellet again in denaturation buffer (60 min, 4 °C, vertical rotator)
  • centrifuge (60 min, >17,000 g, 4 °C)
  • collect supernatant and discard pellet


Ammonium sulfate precipitation

  • Mix fraction you want to clean-up with ammonium sulfate
    • To precipitate S-layer proteins from Corynebacterium, 40 % ammonium sulfate saturation concentration is a good concentration (247 g L-1 ammonium sulfate at 25 °C)
  • Incubate 30 min at room temperature on a shaker
  • Centrifuge (the faster and longer the better) and solve the precipitate in water or buffer


Ultra-/Diafiltration


  • Arrange the filtration module as shown on the right side.
  • Microfiltration (0.22 µm) or cross flow filtration with 300 kDa (we used a Milipore Pellicon XL 300) membrane of sample before ultrafiltration.
  • For concentrating the sample just filter it until the desired volume is left in the feed reservoir. For diafiltration (e.g. buffer exchange, desalting) dilute the feed reservoir several times and filter continously.
  • Used membranes: [http://www.millipore.com/catalogue/module/C7493 Milipore Pellicon XL 50] or XL 100 membranes
    • 50 or 100 kDa cut-off
    • 50 cm2 filtration area
    • tangential flow filter
    • Hydrophilic polyvinylidene fluoride membrane
  • Used pump: SciLog TANDEM 1081 peristaltic pump
    • flow rate during filtration: 40 mL min-1


Ion exchange chromatography (IEX) for S-layer proteins from Corynebacterium

  • equilibrate column with 10 column volumes of binding buffer
  • inject sample and wash column with binding buffer
  • elute with 20 %, 40 % and 60 % of binding / elution buffer mix and collect fractions
  • elute remaining proteins with 100 % elution buffer


His-tag affinity chromatography

  • Column: 1 mL HisTrap FF crude by [http://www.gehealthcare.com/ GE Healthcare]
  • Harvest cells by centrifugation at 10000 g for 10 min at 4 °C
  • Discard the supernatant and freeze bacterial pellet at -20 °C for at least 30 min
  • Resuspend the pellet in 5 mL binding buffer for each gram of cell paste
  • Wash column with 5 - 10 mL of deionized water
  • Equilibrate column with 5 - 10 mL of binding buffer

denaturing

  • For buffers see table buffers for his-tag affinity chromatography
  • Mechanical lysis:
    • Sonification on ice for approx. 5 min with Sonifier 450 by [http://www.gehealthcare.com/ Branson]
  • Centrifuge at 10000 g for 30 min at 4 °C
  • Load sample onto the column
  • Wash with 10 mL binding buffer
  • Elute with 5 mL of elution buffer with increasing imidazole concentrations
  • Collect the eluate in 1 mL fractions, the purified protein is most likely in the second or third fraction
  • Re-equilibrate the column with binding buffer

non-denaturing

  • For buffers see table buffers for his-tag affinity chromatography
  • Enzymatic lysis:
    • Add 0.2 mg L-1 lysozyme, 3 units of Benzonase per mL of culture volume and 1 mM MgCl2
    • Stirr for 30 min at 4 °C
  • Centrifuge at 10000 g for 30 min at 4 °C
  • Load sample onto the column
  • Wash with 10 ml binding buffer
  • Elute with 5 mL of elution buffer with increasing imidazole concentrations
  • Collect the eluate in 1 mL fractions, the purified protein is most likely in the second or third fraction
  • Re-equilibrate the column with binding buffer


Production and purification strategies

Fusion proteins of SgsE and SbpA

  • Cultivation
    • Bioreactor: [http://www.bioengineering-inc.com/standard-reactors.php?id=2.1 Bioengineering NLF22 7 L] with Bioengineering DCU
    • Medium: HSG medium with 20 mg L-1 chloramphenicol
    • Culture volume: 4 L
    • Inoculation OD600: 0.2
    • DO: 40 % airsaturation (controlled with stirrer cascade starting with 200 rpm)
    • pH: 7.0 (controlled with 20 % phosphoric acid and 2 M NaOH)
    • Antifoam: BASF pluronic XXX
    • Induction after 4 h cultivation time with 2 % rhamnose and 0.1 mM IPTG (in culture medium)
    • Harvest after 13 h
  • Cell lysis
    • Centrifuge down the cells (10,000 g, 30 min, 4 °C)
    • Resuspend pellet in enzyme buffer
    • Cell lysis with high-pressure homogenizer (800 bar, 3 cycles at 4 °C)
    • Centrifuge down the lysate (17,000 g, 60 min, 4 °C)
  • Inclusion body clean-up
    • wash pellet from cell lysis with water twice
    • after washing the pellet: incubate the pellet in denaturation buffer for 60 min, 4 °C with vertical rotator
      • final concentration in denaturation buffer: 0.5 mg wet biomass per mL
    • centrifuge (60 min, >17,000 g, 4 °C)
      • in general with all centrifugations during this clean-up: the higher the speed, the better the result
    • collect supernatant and incubate the pellet again in denaturation buffer (60 min, 4 °C, vertical rotator)
    • centrifuge (60 min, >17,000 g, 4 °C)
    • collect supernatant and discard pellet


  • Filtration
    • Arrange the filtration module as shown on the right side.
    • Collect permeate of cross flow filtration with 300 kDa membrane of sample before ultrafiltration
      • This step is for removing cell debris
    • Diafiltrate with 100 kDa membrane against denaturation buffer
      • constantly delute permeate with the buffer, keeping the permeate volume as low as possible
    • Used membranes: [http://www.millipore.com/catalogue/module/C7493 Milipore Pellicon XL 50] or XL 100 membranes
      • 50, 100 or 300 kDa cut-off
      • 50 cm2 filtration area
      • tangential flow filter
      • Hydrophilic polyvinylidene fluoride membrane
    • Used pump: SciLog TANDEM 1081 peristaltic pump
      • flow rate during filtration: 40 mL min-1
  • Dialysis
    • Fill retentate from DF/UF in dialysis tube (Roth, cellulose, 10 kDa cut-off)
    • Dialyse against ddH2O for 18 h at 4 °C in the dark
    • After dialysis: centrifuge down the precipitation (45 min, 17,000 g, 4 °C) and collect the supernatant
    • Measure protein concentration in supernatant, dilute to 1 mg mL-1 with ddH2O and store at 4 °C in the dark
  • Scheme of purification strategy for S-layer (fusion) proteins:
Bielefeld-Germany2011-305 405-Aufreinigung symbol.png


Fusion proteins of CspB without lipid anchor with TAT-sequence

  • Cultivation
    • 150 mL culture in 500 mL or 300 mL culture in 1000 mL shaking flasks with baffles (Schott) with silicon plugs
    • Medium: autoinduction medium
    • Cultivation temperature: 37 °C at 120 rpm
  • Supernatant precipitation
    • Centrifuge down the cells (10,000 g, 30 min, 4 °C) and collect the supernatant
    • To precipitate S-layer proteins from Corynebacterium, 40 % ammonium sulfate saturation concentration is a good concentration (247 g L-1 ammonium sulfate at 25 °C)
    • Incubate 30 min at room temperature on a shaker
    • Centrifuge (the faster and longer the better) and solve the precipitate in binding buffer for IEX


  • Filtration
    • Arrange the filtration module as shown on the right side.
    • Collect permeate of cross flow filtration with 300 kDa membrane of sample before ultrafiltration
      • This step is for removing cell debris
    • Diafiltrate with 50 kDa membrane against binding buffer for IEX
      • constantly delute permeate with the buffer, keeping the permeate volume as low as possible
    • Used membranes: [http://www.millipore.com/catalogue/module/C7493 Milipore Pellicon XL 50], XL 100 or XL 300 membranes
      • 50, 100 or 300 kDa cut-off
      • 50 cm2 filtration area
      • tangential flow filter
      • Hydrophilic polyvinylidene fluoride membrane
    • Used pump: SciLog TANDEM 1081 peristaltic pump
      • flow rate during filtration: 40 mL min-1
  • Ion exchange chromatography
    • used column: DEAE HiTrap 1 mL with GE Healthcare ÄKTA
    • flow rate: 1 mL min-1
    • equilibrate column with 10 column volumes of binding buffer
    • inject sample and wash column with binding buffer
    • elute with 20 %, 40 % and 60 % binding / elution buffer mix and collect samples -> take the cleanest fraction for further work
    • elute remaining proteins with 100 % elution buffer
  • Scheme of purification strategy for CspB S-layer (fusion) proteins:
Bielefeld-Germany2011-CH4-Aufreinigung symbol.png


Recrystallization of S-layer proteins

Recrystallization of SgsE and SbpA in solution

  • after purification: dialyse 18 h at 4 °C against ddH2O in the dark
  • centrifuge and use supernatant -> this is the monomeric protein solution
  • dialyse 18 h at 4 °C against
    • HBSS pH 7.4 for SgsE and
    • recrystallization buffer (0.5 mM Tris-HCl, pH 9, 10 mM CaCl2) for SbpA


Immobilization of SgsE on silica beads

  • after purification: dialyse 18 h at 4 °C against ddH2O in the dark
  • centrifuge and use supernatant -> this is the monomeric protein solution
  • measure protein concentration
  • dilute purified monomeric S-layer solution to 1 mg mL-1 protein with ddH2O -> store in the dark at 4 °C
  • suspend silicium dioxide beads in HBSS (pH 7.4) and mix it with the 1 mg mL-1 S-layer solution
    • ratio of beads to protein can be varied
    • 0.1 mg mL-1 final protein concentration
    • contact with HBSS buffer will start assembly of SgsE
  • incubate on vertical rotator at room temperature for 4 h
  • after incubation: centrifuge down the beads (1 min, > 15,000 g), wash them twice with ddH2O and store them afterwards in ddH2O at 4 °C in the dark


Immobilization of SbpA on silica beads

  • after purification: dialyse 18 h at 4 °C against ddH2O in the dark
  • centrifuge and take supernatant -> this is the monomeric protein solution
  • measure protein concentration
  • dilute purified monomeric S-layer solution to 1 mg mL-1 protein with ddH2O -> store in the dark at 4 °C
  • suspend silicium dioxide beads in recrystallization buffer (0.5 mM Tris-HCl, pH 9, 10 mM CaCl2) and mix it with the 1 mg mL-1 S-layer solution
    • ratio of beads to protein can be varied
    • 0.1 mg mL-1 final protein concentration in
    • contact with recrystallization buffer will start assembly of SbpA
  • incubate on vertical rotator at room temperature for 4 h
  • after incubation: centrifuge down the beads (1 min, > 15,000 g), wash them twice with ddH2O and store them afterwards in ddH2O at 4 °C in the dark