Team:ETH Zurich/Modeling/Parameters

From 2011.igem.org

Revision as of 12:40, 27 October 2011 by Luwidmer (Talk | contribs)

Can you feel the smoke tonight?
 

Contents

Modeling - Parameters

Of course, our models do not work without parameters, and in our case, there are quite a lot of them. In order to keep track of all of their respective values and units, we gathered them in a series of tables on this page.

Single-Cell Model

a. - assumption

Parameter Description Value Reference
αTetR TetR max. production rate 3.93 μM/min, updated to 1 μM/min [5]
αC CI max. production rate 1 μM/min [1]
αL1 LacI max. production rate 1 μM/min [1]
αL2 LacIM1 max. production rate 1 μM/min [1]
αG GFP max. production rate 2 μM/min [1]
αLuxI LuxI max. production rate 1 μM/min [1]
ks1 AHLi production rate 0.01 1/min [2]
ρR LuxR-AHL dimerization rate 0.5 1/(μM3*min) [1]
αRFP RFP max. production rate 1 μM/min a.
βAcA Acetaldehyde repression coefficient 7.124 μM [5]
βT TetR repression coefficient 0.01 μM, updated to 0.1 μM/min a.
βC CI repression coefficient 0.008 μM [1]
βL LacI repression coefficient 0.8 μM [1]
θR LuxR-AHL repression coefficient 0.01 μM [1]
γTetR TetR degradation rate 0.0692 1/min a.
γC CI degradation rate 0.0692 1/min [1]
γL LacI degradation rate 0.0231 1/min [1]
γG GFP degradation rate 0.0692 1/min [1]
γLuxI LuxI degradation rate 0.0167 1/min [3]
ks0 AHLi degradation rate 1 1/min [2]
kse AHLe degradation rate 1 1/min [2]
γR LuxR-AHL degradation rate 0.0231 1/min [1]
γRFP RFP degradation rate 0.0041 1/min [4]
n1 LacI cooperativity coefficient 2 [1]
n2 CI cooperativity coefficient 2 [1]
n3 TetR cooperativity coefficient 2 [2]
n4 LuxR-AHL cooperativity coefficient 1 [1]
n5 AlcR-AcA cooperativity coefficient 1.352 [5]
n7 XylR cooperativity coefficient 5 [6]
η Diffusion rate across the cell membrane 2 [2]
ηext Average diffusion rate for all cells 1 [2]
N Number of cells 1 a.
aXylR XylR max. production rate 95.5 μM/min [6]
γXylRi XylRi degradation rate 0.03553 1/min [6]
γXylRa XylRa degradation rate 0.04527 1/min [6]
KXylR XylR activation coefficient 1.419*10-3 μM [6]
rXylR XylRi oligomerization constant 0.04315e-3 1/(μM*min) [6]
rRXylR XylRa dissociation constant 0.1301e-3 1/(μM*min) [6]


Diffusion Model

Parameter Description Value Reference
zend Microfluidics channel length 5 cm Choice in diffusion model
RChannel Microfluidics channel radius 1 mm Choice in diffusion model
VeColi E. coli average volume 2 μm3 [13] [14]
cdOD600, undiluted E. coli Cell Density at OD600 = 1 1e9 1/ml [13] [16]
cDilution Dilution of cell culture in microfludics channel 1/8 Choice in diffusion model
cdRelOD600, undiluted Relative E. coli Cell Density at OD600 = 1, undiluted 0.001 Derived from VeColi, cdOD600, undiluted
cdRelOD600, diluted Relative E. coli Cell Density at OD600 = 1, diluted 0.000125 Derived from cdRelOD600, undiluted, cDilution
CAgarose Scaling coefficient for diffusion of small molecules in agarose instead of water 0.9 a.
DAcAl Acetaldehyde Diffusion Constant 1.23e-5 cm2/s [8]
mAcAl Acetaldehyde Molecular Weight 44.05316 u [8]
Kcat,AcAl Specific enzyme activity of acetaldehyde dehydrogenase in E. coli 14.1 μmol/(min*mg) [10] [11]
[E]T Mean acetaldehyde dehydrogenase enzyme concentration in E. coli 1.6659 kg/m3 Estimation from cell extract, [11]
vmax,AcAl Maximum reaction rate for acetaldehyde dehydrogenase degrading acetaldehyde 0.02349 M/min Estimation from cell extract, [11]
KM,AcAl Michaelis-Menten constant for acetaldehyde dehydrogenase degrading acetaldehyde 10 μM [10] [11]
mADH Molecular mass of acetaldehyde dehydrogenase 33442 u [12]
nADH Mean number of acetaldehyde dehydrogenase protein molecules per E. coli cell 28512.2, rounded to 30000 Estimation from cell extract, [11]
[ADH]Extract acetaldehyde dehydrogenase concentration in E. coli cell extract 19 mg/ml [11]
dilExtract E. coli cell extract dilution 1/12 [11]


Combined Model

Parameter Description Value Reference
DAHL AHL Diffusion Constant 4.9e-6 cm2/s [9]
mAHL AHL Molecular Weight 297.38990 u [15]
γAHL,ext AHL cell-external degradation 8.0225e-006/s Derived from 1 day half-life at pH 7 [7]


Back to iGEM Our Sponsors
ETHZ-BASF.png ETH Zurich Logo.png ETHZ-Lonza.png ETHZ-Merck Serono.png
ETHZ-Novartis.png ETHZ-Roche.png ETHZ-Syngenta.png DSM MasterLogo.png
 

Retrieved from "http://2011.igem.org/Team:ETH_Zurich/Modeling/Parameters"