Team:UNIPV-Pavia/Measurements

From 2011.igem.org

Revision as of 21:35, 14 September 2011 by Nickpv (Talk | contribs)

UNIPV TEAM 2011

Contents

pTet protocol

  1. Streak long term storage glycerol stocks on a LB agar plate + Cm12.5 (don't forget positive and negative controls). Let them grow over night at 37°C.
  2. Pick 3 colonies from each clone and inoculate it in 1 ml M9 + Cm12.5 in a falcon tube; let them grow over night at 37 °C, 220 rpm.
  3. Dilute cultures 1:500 in 1 ml of M9 + Cm12.5 and let them grow at 37°C, 220 rpm for three hours.
  4. Induce cultures in falcon tube with anhydrotetracycline (aTc) (final concentrations: 0 ng/ml, 1 ng/ml, 2 ng/ml, 3 ng/ml, 4 ng/ml, 5 ng/ml, 8 ng/ml, 10 ng/ml, 50 ng/ml, 100 ng/ml). Grow cultures at 37°C, 220 rpm for three hours.
  5. Aliquot 200 μl of cultures in microplate wells and measure O.D. and fluorescence with Tecan Infinite F200 microplate reader. Set the automatic procedure:
    • temperature: 37°C
    • sampling time: 5 minutes
    • 15 seconds of linear shaking (3 mm amplitude) followed by 5 seconds waiting before measurements
    • fluorescence gain: 50 - 80
    • O.D. filter: 600 nm
    • RFP filters: 535 nm (excitation) / 620 nm (emission)
    • duration time: 10 - 15 hours

pLux protocol

  1. Streak long term storage glycerol stocks on a LB agar plate + Cm12.5 (don't forget positive and negative controls). Let them grow over night at 37°C.
  2. Pick 3 colonies from each clone and inoculate it in 1 ml M9 + Cm12.5 in a falcon tube; let them grow over night at 37°C, 220 rpm.
  3. Dilute cultures 1:500 in 1 ml of M9 + Cm12.5 and let them grow for three hours at 37°C, 220 rpm.
  4. Induce cultures in falcon tube with 3OC6-HSL (final concentrations: 0 nM, 0.1 nM, 0.5 nM, 1 nM, 2 nM, 5 nM, 10 nM, 100 nM). Grow cultures for three hours at 37°C, 220 rpm.
  5. Aliquot 200 μl of cultures in microplate wells and measure O.D. and fluorescence with Tecan Infinite F200 microplate reader. Set the automatic procedure:
    • temperature: 37°C
    • sampling time: 5 minutes
    • 15 seconds of linear shaking (3 mm amplitude) followed by 5 seconds waiting before measurements
    • fluorescence gain: 50 - 80
    • O.D. filter: 600 nm
    • RFP filters: 535 nm (excitation) / 620 nm (emission)
    • duration time: 10 - 15 hours

Enzyme activity assay

AiiA activity

  1. Inoculate 5 μl of long term glycerol stocks in 1 ml of M9 + Cm12.5 and grow the cultures over night at 37°C, 220 rpm.
  2. Dilute cultures 1:100 in 4 ml M9 + Cm12.5 in falcon tubes and grow them for two hours at 37°C, 220 rpm.
  3. Induce cultures with aTc (final concentrations: 6 ng/ml, 8 ng/ml and 100 ng/ml) and wait for one hour at 37°C, 220 rpm.
  4. Add 100 nM 3OC6-HSL.
  5. Collect supernatants (measuring the O.D. at 600 nm) at the moment of induction, after 1 hour, 2 hours and 4 hours by:
    • take 250 μl of cultures
    • centrifuge them 13.300 rpm, 4 minutes
    • collect the supernatants (without resupsending the pelleted bacteria)
    • grow cultures at 37°C, 220 rpm
  6. Store supernatants at -20°C.
  7. Inoculate 5 μl BBa_T9002 in 1 ml M9 (together with a negative control culture); let them grow over night at 37°C, 220 rpm.
  8. Dilute BBa_T9002 and negative control 1:100 in M9; grow cultures for two hours at 37°C, 220 rpm.
  9. Measure 3OC6-HSL concentration of the previously collected supernatants (diluting them 1:20), inducing BBa_T9002 cultures: aliquot 190μl of inducible cultures and 10 μl of supernatants in each well of the microplate. Don't forget to build a calibration curve, by inducing BBa_T9002 cultures with known 3OC6-HSL concentrations (0 nM, 0.1 nM, 0.2 nM, 0.5 nM, 1 nM, 2 nM, 5 nM, 10 nM, 100 nM, 1 μM). Use Tecan Infinite F200, setting the automatic procedure:
    • temperature: 37°C
    • sampling time: 5 minutes
    • 15 seconds of linear shaking (3 mm amplitude) followed by 5 seconds waiting before measurements
    • fluorescence gain: 50
    • O.D. filter: 600 nm
    • GFP filters: 485 nm (excitation) / 540 nm (emission)
    • duration time: 10 - 15 hours

LuxI activity

  1. Inoculate 5 μl of long term glycerol stocks in 1 ml of M9 + Cm12.5 and grow the cultures over night at 37°C, 220 rpm.
  2. Dilute cultures 1:100 in 4 ml M9 + Cm12.5 in falcon tubes and grow them for two hours at 37°C, 220 rpm.
  3. Induce cultures with aTc (final concentrations: 6 ng/ml, 8 ng/ml and 100 ng/ml) and wait for one hour at 37°C, 220 rpm.
  4. Collect supernatants (measuring the O.D. at 600 nm) at the moment of induction, after 1 hour, 2 hours and 4 hours by:
    • take 250 μl of cultures
    • centrifuge them 13.300 rpm, 4 minutes
    • collect the supernatants (without resupsending the pelleted bacteria)
    • grow cultures at 37°C, 220 rpm
  5. Store supernatants at -20°C.
  6. Inoculate 5 μl BBa_T9002 in 1 ml M9 (together with a negative control culture); let them grow over night at 37°C, 220 rpm.
  7. Dilute BBa_T9002 and negative control 1:100 in M9; grow cultures for two hours at 37°C, 220 rpm.
  8. Measure 3OC6-HSL concentration of the previously collected supernatants (diluting them 1:20), inducing BBa_T9002 cultures: aliquot 190μl of inducible cultures and 10 μl of supernatants in each well of the microplate. Don't forget to build a calibration curve, by inducing BBa_T9002 cultures with known 3OC6-HSL concentrations (0 nM, 0.1 nM, 0.2 nM, 0.5 nM, 1 nM, 2 nM, 5 nM, 10 nM, 100 nM, 1 μM). Use Tecan Infinite F200, setting the automatic procedure:
    • temperature: 37°C
    • sampling time: 5 minutes
    • 15 seconds of linear shaking (3 mm amplitude) followed by 5 seconds waiting before measurements
    • fluorescence gain: 50
    • O.D. filter: 600 nm
    • GFP filters: 485 nm (excitation) / 540 nm (emission)
    • duration time: 10 - 15 hours

Retrieved from "http://2011.igem.org/Team:UNIPV-Pavia/Measurements"