Team:Imperial College London/Project Chemotaxis Testing

From 2011.igem.org

(Difference between revisions)
 
(208 intermediate revisions not shown)
Line 1: Line 1:
{{:Team:Imperial_College_London/Templates/Header}}
{{:Team:Imperial_College_London/Templates/Header}}
{{:Team:Imperial_College_London/Templates/Chemotaxis}}
{{:Team:Imperial_College_London/Templates/Chemotaxis}}
 +
{{:Team:Imperial_College_London/Templates/Accordion}}
<html>
<html>
Line 6: Line 7:
<h1>Testing</h1>
<h1>Testing</h1>
-
<p>The assembled construct PA2652 (<a href="http://partsregistry.org/Part:BBa_K515102">BBa_K515102</a>) and non codon optimised mcpS in pRK415, have been inserted and tested for functioning in <i>E. coli DH5α</i> obtained from New England Biolabs. The tests have tried to show the rewired chemotaxis towards L (-) malic acid. We have separated testing of chemotaxis towards malate into qualitative, quantitative and behavioral analyses. One factor concerning the assays, which was severely underestimated at the start of the testing stage, but was quickly realised, was the difficulty of performing a functional assay to obtain results. Testing of the functionality of our construct has therefore involved an enormous number of changes and troubleshooting modifications, just to find out that further changes were needed for a functioning assay.</p>
+
<p style="font-size:1.3em;"><a href="#" onClick="ddaccordion.collapseall('technology'); return false">Collapse all</a> | <a href="#" onClick="ddaccordion.expandall('technology'); return false">Expand all</a></p>
-
<p> To test bacterial uptake into the roots of the plants we were working with <i>Arabidopsis thaliana</i> to observe the uptake of bacteria into plant roots.
+
<div class="technology">1. Introduction</div>
-
<i>A. thaliana</i> is a common plant model organism. It belongs to the mustard family and fulfils many important requirements for model organism. As such, its genome has been almost completely sequenced and replicates quickly, producing a large number of seeds. It is easily transformed and many different mutant strains have been constructed to study different aspects (National Institute of Health, no date). While Arabidopsis may not represent plant populations naturally occurring in arid areas threatened by desertification, it is a handy model organism we will be using to study the effect of auxin on roots, observe chemotaxis towards them and look at uptake of bacteria into the roots.</p>
+
<div class="thelanguage">
-
<h2>Qualitative analysis</h2>
+
<p>The assembled PA2652 construct (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>) and non-codon optimised mcpS (in pRK415 backone vector), have been inserted and tested for functionality in <i>E. coli</i> DH5α obtained from New England Biolabs. We carried out several tests in an attempt to characterise the rewired chemotaxis towards L(-)malic acid. We separated testing of chemotaxis towards malate into behavioural, qualitative & quantitative analyses. </p>
-
<p>Qualitative assays should inform us about positive or negative result of rewiring chemotaxis in <i>E. coli</i> with engineered construct mcpS or PA2652 (<a href="http://partsregistry.org/Part:BBa_K515102">BBa_K515102</a>). However it does not inform us about the cell count and the extent to which engineered bacteria can chemotax towards the attractant source.</p>
+
 
-
<p>A number of methods exist that show chemotaxis towards a source (1). Most of them are based on the properties of semi - solid agar, which allows diffusion of molecules and bacterial movement. We have modified agar plug assay to to observe chemotactic response. The bacteria used were in mid - exponential phase (OD<sub>600</sub> 0.4 - 0.6). Cells suspended in the semi solid agar were left overnight to grow and move. At the end of the assay the plates were imaged using Fujifilm LAS-3000 Imager.</p>
+
<p> To test bacterial uptake into the roots of the plants, we worked with <i>Arabidopsis thaliana</i> to replicate the experiment by Paungfoo-Lonhienne et al<sup>[6]</sup>. <i>Arabidopsis </i> is a common plant model organism. Its genome has been almost completely sequenced and replicates quickly, producing a large number of seeds. Many different mutant strains have been constructed to study its different characteristics<sup>[1]</sup>. While <i>Arabidopsis</i> may not represent plant populations naturally occurring in arid areas threatened by desertification, it is a useful model organism which we will be using to study the effect of the auxin plant hormone, indole-3-acetic acid (IAA) on roots, observe chemotaxis towards them, and observe them taking up bacteria as nutrients.</p>
-
<p><i>DH5-α Escherichia coli</i> cells were used as studied subject expressing our construct. Negative control used were cells without engineered construct, with selection marker for ampicillin and kanamycin. This was to show inability of the non - engineered cells to perform chemotaxis towards malate. Positive control used were cells without engineered construct, with selectable marker for kanamycin and ampicillin. The attractant used to test positive control was serine a chemical, which is recognised by native chemoreceptors of <i>E. coli</i>. This was to show that cells we are using to conduct our experiments have functional chemotaxis pathway and are capable of recognising an attractant gradient.The tested <i>DH5-α Escherichia coli</i> contained construct (<a href="http://partsregistry.org/Part:BBa_K515102">BBa_K515102</a>) PA2652 malate chemoreceptor.We have also tested cells containing non-codon optimised mcpS gene carried on pRK415 plasmid with selectable tetracycline. However due to the lack of information about the construct, and the fact that it is non - standard biobrick format, with several illegal restriction sites within the sequence, we did not test this construct further analyses.</p>
+
 
-
<p>Results expected from this assay should show clear differences in shape of the formed colony, since the bacteria attracted to source will move and therefore distort the shape of the colony into eliptical, directed shape towards the source, in comparison with control, which expected to look circular as bacteria are equally likely to swim into any direction.</p>
+
<p style="text-align:right;font-size:1.3em;"><a href="#" class="collapseLink" onClick="ddaccordion.collapseone('technology', 0); return false">Collapse</a></p>
 +
</div>
 +
 
 +
<div class="technology">2. Bacterial chemotaxis towards malate</div>
 +
<div class="thelanguage">
 +
<p><h3>2.1 Behavioral analysis<a href="https://2011.igem.org/Team:Imperial_College_London/Protocols_Chemotaxis"><img src="https://static.igem.org/mediawiki/2011/5/58/ICL_ProtocolIconDark.png" width="140px" align="right"/></a></h3>
 +
 
 +
<br>
 +
<p>Bacteria perform two types of movement, smooth swimming and tumbling. In the absence of attractant the result of the two movements lead to random walk without directionality. In the presence of a concentration gradient of attractant, the probabilities of the two movements change and lead to the directional movement known as random biased walk.</p>
 +
<br>
 +
<div class="vidbox">
 +
<table>
 +
<tr>
 +
<td>
 +
<iframe width="500" height="281.25" src="http://www.youtube.com/embed/cgUZJvaeQkA" frameborder="0" allowfullscreen></iframe>
 +
</td>
 +
<td>
 +
<p><i>Video 1: Mixed population of GFP-expressing control and non-GFP labelled PA2652 expressing </i>E. coli<i>.</i><i> The bacteria have been placed in motility buffer without attractant and therefore there is no observed difference in behaviour between the two. Since no attractant is present, a majority of the bacteria perform tumbling, however there are individual bacteria that perform smooth swimming, a rapid movement. In this video, bacteria decide randomly between tumbling and smooth swimming, which is known as random walk. When bacteria perform chemotactic behaviour towards a concentration gradient(not pictured), the probability of the bacteria performing smooth swimming increases after a transient decrease due to saturation of chemoreceptors. This video has been taken as a set of frames, with one frame per four seconds. Imaging done by Imperial iGEM 2011.</i></p>
 +
</td>
 +
</tr>
 +
</table>
 +
</div>
 +
 
 +
<p>During bacterial movement up a concentration gradient of attractant, the probability of the smooth swimming is higher than that of tumbling. Smooth swimming is a fast, uni-directional movement, whereas tumbling is random and although the speed may not be slow, overall velocity is far less than that of smooth swimming. Due to the complicated assay set up with a concentration gradient, we changed strategy to look for uniformity of the bacterial movement. We expected the cells, which are capable of malate recognition to show much more uniform response than those that do not. The bacteria were grown to mid-exponential phase (OD<sub>600</sub> 0.4-0.6) before being induced in motility buffer 2 hours prior to observation. Bacteria containing construct PA2652 (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>) have been exposed to motility buffer (reference), 10 mM serine (positive control) & 10 mM malate (test). <i>E. coli</i> DH5α without any construct have been exposed to 10 mM malate (negative control). Observations were taken with a Zeiss Axiovert 200 Inverted Fluorescent Microscope and video collection Volocity software. ImageJ plug-in Manual Tracking was used to collect data and Chemotaxis Tool plug-in to analyze the data.</p>
 +
<br>
 +
<div class="imgbox" style="width:800px;margin:0 auto;">
 +
<img class="border" src="https://static.igem.org/mediawiki/2011/2/26/ICL_PA2652_probability_density_function.png" width="780px"/>
 +
<p><i>Figure 1: Probability density function of bacterial number at observed velocities. PA2652 cells exposed to 10 mM malate are more than 90% likely to be moving at just over 2 μm/s. PA2652 cells that were exposed to serine were 90% likely to be moving at a velocity just over 2 μm/s. PA2652 cells that were not exposed to attractant were over 70% likely to be moving at 2 μm/s. Cells without BBa_K515102 construct were less than 50% likely to be moving at a velocity between 2 and 4 μm/s. Data depicts difference in response between PA2652 cells, which were and which were not exposed to an attractant. Also cells without construct show lack of uniform response when exposed to 10 mM malate. Data collected by Imperial iGEM 2011.</i></p>
 +
</div>
 +
<br>
 +
<p>From the data analysis it seems that the bacteria with construct BBa_K515102, when in 10 mM malate perform a very uniform behaviour. This is also confirmed by positive control cells exposed to 10 mM serine, where the response of cells is also highly uniform. Cells with construct PA2652 without exposure to saturating attractant show less uniform movement than PA2652 cells, whether exposed to malate or serine. Also negative control cells fail to show uniformity in their movement suggesting inability to recognise the saturating medium containing 10 mM malate and therefore, performing their movement randomly. </p>
 +
<h3>2.2 Qualitative analysis<a href="https://2011.igem.org/Team:Imperial_College_London/Protocols_Chemotaxis"><img src="https://static.igem.org/mediawiki/2011/5/58/ICL_ProtocolIconDark.png" width="140px" align="right"/></h3></a>
 +
<br>
 +
 
 +
<p>Qualitative assays were done to observe the effect of rewiring chemotaxis in <i>E. coli</i> with the engineered constructs PA2652 and mcpS (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>). </p>
 +
 
 +
<p>A number of methods exist that show chemotaxis towards a source <sup>[2]</sup>. Most of them are based on the properties of semi-solid agar, which allows diffusion of molecules and bacterial movement. We have modified an agar plug assay, which involves plating bacteria at opposite end of attractant on a petri-dish, to observe chemotaxis. The bacteria used were in mid-exponential phase (OD<sub>600</sub> 0.4-0.6). Cells suspended in the semi-solid agar were positioned 2 cm away from the attractant source and left overnight to grow. At the end of the assay the plates were imaged using Fujifilm LAS-3000 Imager.</p>
 +
 
 +
<p>This assay was done to show the functional chemotaxis of <i> E. coli</i> DH5α transformed with our PA2652 construct (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>) compared to the inability of control <i> E. coli</i> DH5α to do the same. Positive control cells were exposed to increasing concentrations of serine, which is recognised by the endogenous chemoreceptors of <i>E. coli</i>, to observe what the movement we are looking for in cells with our construct. We have also tested cells containing the non-codon optimised mcpS gene for qualitative analysis. <p>
 +
<p>Results from this assay should show clear differences in the shape of colonies formed. Bacteria attracted to the source move and distort the colony into an elliptical, directed shape towards the source. We expect the control colonies to look circular because bacteria are equally likely to swim into any direction.</p>
<p><i>Table 1: The concentrations of attractant tested</i></p>
<p><i>Table 1: The concentrations of attractant tested</i></p>
Line 20: Line 60:
   <tr>
   <tr>
     <td><p>Molar range</p></td>
     <td><p>Molar range</p></td>
-
     <td><p>0 M</p></td>
+
     <td><p>0 mM</p></td>
-
<td><p>10<sup>-5</sup> M</p></td>
+
<td><p>0.01 mM</p></td>
-
     <td><p> 10 <sup>-4</sup> M</p></td>
+
     <td><p> 0.1 mM</p></td>
-
<td><p>10 <sup>-3</sup> M</p></td>
+
<td><p>1 mM</p></td>
-
<td><p> 10 <sup>-2</sup> M</p></td>
+
<td><p> 10 mM</p></td>
-
<td><p>10 <sup>-1</sup> M</p></td>
+
<td><p>100 mM</p></td>
   </tr>
   </tr>
   <tr>
   <tr>
Line 41: Line 81:
<div class="imgbox" style="width:920px;" >
<div class="imgbox" style="width:920px;" >
<img class="border" src="https://static.igem.org/mediawiki/igem.org/5/5a/ICL_semisolid_pc_0to0.1M.png" width="900px" />
<img class="border" src="https://static.igem.org/mediawiki/igem.org/5/5a/ICL_semisolid_pc_0to0.1M.png" width="900px" />
-
<p><i>Figure 1: Rising concentrations of serine were tested. a) 0 M control - circular colony b) 10<sup>-5</sup> M - circular colony e) 10 <sup>-4</sup> M - circular colony d) 10 <sup>-3</sup> M - possible eliptical colony c) 10 <sup>-2</sup> M - eliptical colony f) 10 <sup>-1</sup> M - eliptical colony away from the attractant.</i></p>
+
<p><i>Figure 2: Increasing concentrations of serine were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM – rendered void due to mis-handling with semi-solid agar  d) 1 mM - circular colony e) 10 mM - elliptical colony f) 100 mM - elliptical colony away from the attractant due to saturation. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
<img class="border" src="https://static.igem.org/mediawiki/igem.org/1/11/ICL_pc_17_0to25mM.png" width="900px" />
<img class="border" src="https://static.igem.org/mediawiki/igem.org/1/11/ICL_pc_17_0to25mM.png" width="900px" />
-
<p><i>Figure 2: Rising concentrations of serine were tested. a) 0 mM control - circular colony, b)5 mM - eliptical colony c) 10 mM - eliptical colony d) 15 mM - eliptical colony e) 20 mM - eliptical colony f) 25mM - circular colony.</i></p>
+
<p><i>Figure 3: Increasing concentrations of serine were tested. a) 0 mM control - circular colony, b)5 mM - elliptical colony c) 10 mM - elliptical colony d) 15 mM - elliptical colony e) 20 mM - elliptical colony f) 25mM - elliptical colony.Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
<p style="text-align:center;"><b>Negative control</b></p>
<p style="text-align:center;"><b>Negative control</b></p>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
<img class="border" src="https://static.igem.org/mediawiki/igem.org/1/19/ICL_semisolid_nc_17_0to0.1M.png" width="900px" />
<img class="border" src="https://static.igem.org/mediawiki/igem.org/1/19/ICL_semisolid_nc_17_0to0.1M.png" width="900px" />
-
<p><i>Figure 2: Rising concentrations of malate were tested. a) 0 M control - circular colony b) 10<sup>-5</sup> M - circular colony c) 10 <sup>-4</sup> M - circular colony d) 10 <sup>-3</sup> M - circular colony e) 10 <sup>-2</sup> M - circular colony f) 10 <sup>-1</sup> M - circular colony.</i></p>
+
<p><i>Figure 4: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM - circular colony d) 1 mM - circular colony e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
<img class="border" src="https://static.igem.org/mediawiki/igem.org/5/5b/ICL_semisolid_nc_17_0to25mM.png" width="900px" />
<img class="border" src="https://static.igem.org/mediawiki/igem.org/5/5b/ICL_semisolid_nc_17_0to25mM.png" width="900px" />
-
<p><i>Figure 2: Rising concentrations of malate were tested. a) 0 M control - circular colony b)5 mM - circular colony c) 10 mM - circular colony d) 15 mM - circular colony e) 20 mM - circular colony, f) 25mM - circular colony.</i></p>
+
<p><i>Figure 5: Increasing concentrations of malate were tested. a) 0 M control - circular colony b)5 mM - circular colony c) 10 mM - circular colony d) 15 mM - circular colony e) 20 mM - circular colony, f) 25mM - circular colony. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
<p style="text-align:center;"><b>McpS - pRK415</b></p>
<p style="text-align:center;"><b>McpS - pRK415</b></p>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
-
<img class="border" src="https://static.igem.org/mediawiki/2011/0/08/ICL_semisolid_mcpS_0to0.1M.jpg" width="900px" />
+
<img class="border" src="https://static.igem.org/mediawiki/igem.org/2/27/ICL_semisolid_mcpS_0to0.1M.png" width="900px" />
-
<p><i>Figure 2: Rising concentrations of malate were tested. a) 0 M control - circular colony b) 10<sup>-5</sup> M - circular colony c) 10 <sup>-4</sup> M - circular colony d) 10 <sup>-3</sup> M - circular colony e) 10 <sup>-2</sup> M - circular colony f) 10 <sup>-1</sup> M - circular colony.</i></p>
+
<p><i>Figure 6: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM - circular colony d) 1 mM - circular colony e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
-
<img class="border" src="https://static.igem.org/mediawiki/2011/1/1e/ICL_semisolid_mcpS_0to25mM.jpg" width="900px" />
+
<img class="border" src="https://static.igem.org/mediawiki/igem.org/1/18/ICL_semisolid_mcpS_0to25mM.png" width="900px" />
-
<p><i>Figure 2: Rising concentrations of serine were tested. a) 0 mM control - circular colony b)5 mM - circular colony c) 10 mM - eliptical colony formed not in the direction expected d) 15 mM - possible eliptical colony e) 20 mM - possible eliptical colony f) 25mM - circular colony.</i></p>
+
<p><i>Figure 7: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b)5 mM - circular colony c) 10 mM - elliptical colony formed not in the direction expected d) 15 mM - possible elliptical colony e) 20 mM - possible elliptical colony f) 25 mM - circular colony. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
-
<p style="text-align:center;"><b>PA2652 - <a href="http://partsregistry.org/Part:BBa_K515102">BBa_K515102</a></b></p>
+
<p style="text-align:center;"><b>PA2652 - <a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a></b></p>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
-
<img class="border"  src="https://static.igem.org/mediawiki/2011/4/40/ICL_semisolid_PA2652_0to0.1M.jpg" width="900px" />
+
<img class="border"  src="https://static.igem.org/mediawiki/igem.org/b/bc/ICL_semisolid_PA2652_0to0.1M.png" width="900px" />
-
<p><i>Figure 2: Rising concentrations of malate were tested. a) 0 M control - circular colony b) 10<sup>-5</sup> M - possible eliptical colony the shape is hard to analyze c) 10 <sup>-4</sup> M - strange shape of colony observed, however this was not a result of mishandling with semi - solid agar d) 10 <sup>-3</sup> M - colony shape is not perfectly circular however not eliptical either e) 10 <sup>-2</sup> M - circular colony f) 10 <sup>-1</sup> M - circular colony.</i></p>
+
<p><i>Figure 8: Increasing concentrations of malate were tested. a) 0 M control - circular colony b) 0.01 mM - possible elliptical colony the shape is hard to analyze c) 0.1 mM - strange shape of colony observed, we cannot explain this phenomenon d) 1 mM - colony shape is not perfectly circular however not elliptical either e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
<div class="imgbox" style="width:920px;">
<div class="imgbox" style="width:920px;">
-
<img class="border" src="https://static.igem.org/mediawiki/2011/0/09/ICL_semisolid_PA2652_0to25mM.jpg" width="900px" />
+
<img class="border" src="https://static.igem.org/mediawiki/2011/1/17/ICL_semisolid_PA2652_0to25mM.png" width="900px" />
-
<p><i>Figure 2: Rising consentrations of serine were tested. a) 0 mM control - circular colony b)5 mM - colony shape was rendered void due to mishandling with semi - solid agar c) 10 mM - circular colony d) 15 mM - eliptical shape of the colony is not in the direction of the attractant e) 20 mM - colony shape was rendered void due to mishandling with semi - solid agar f) 25mM - circular colony.</i></p>
+
<p><i>Figure 9: Icreasing concentrations of serine were tested. a) 0 mM control - circular colony b)5 mM - colony shape was rendered void due to mishandling with semi-solid agar c) 10 mM - possible elliptical shape colony d) 15 mM - circular colony e) 20 mM - colony shape was rendered void due to mishandling with semi - solid agar f) 25mM - circular colony. Data collected by Imperial iGEM 2011.</i></p>
</div>
</div>
-
<p> The data obtained from this assay were not easily analysed. This assay is qualitative and therefore should provide us with positive or negative result. However upon analysis of the data a conclusion can not be drawn. This is because, set up of the assay gives space for ambiguity. This is due to a number of factors. Attractant is localised, and it diffuses to all directions, however the plate is not infinite and therefore loss of concentration gradient occurs over time. Another factor is the semi - solid agar itself. This medium is relatively difficult to manipulate with and a number of samples were ruined during the handling. Even considering that set up of this assay lead to vague results a number of points can be drawn. Positive control have shown that <i>E. coli DH5α</i> are capable of chemotaxis. It has also shown that when added attractant is of too high concentration (10<sup>-1</sup> M) bacteria do not swim directly towards the attractant source since the medium around the source is saturated. Instead they perform chemotaxis in a direction, where the attractant concentration gradient is set up, so that it is in the range for sensing by chemoreceptors. This occurs even if it means that the bacteria effectively move away from the attractant source. Negative control have shown that at any tested concentration of L (-) malic acid <i>E. coli DH5α</i> without PA2652 or mcpS construct do not perform chemotaxis towards attractant show. The assay have, however failed to conclude a result for mcpS or PA2652 construct as the colonies observed have a range of shapes at different attractant concentrations, that do not allow us to conclude positive or negative result.</p>
+
<p> Upon analysis of the data, a definitive conclusion could not be drawn. This is due to a number of factors in the setup of the assay. Attractant is localised, and it diffuses in all directions, however the plate is finite and therefore loss of concentration gradient occurs over time. Another factor is the semi-solid agar itself, a medium which is very difficult to manipulate. Although the results were vague, a number of points can be drawn. Positive controls have shown that <i>E. coli DH5α</i> are capable of chemotaxis. They have also shown that when the added serine concentration is too high (10<sup>-1</sup> M), bacteria do not swim directly towards the attractant source because the surrounding medium is saturated. Instead they perform chemotaxis in a direction towards which the attractant concentration does not saturate the chemoreceptors. This movement still occurs regardless of the fact that the bacteria are moving away from the attractant source. Negative controls have shown that at any tested concentration of L(-)malic acid, <i>E. coli DH5α</i> without PA2652 or mcpS construct do not perform chemotaxis towards attractant. We could not conclude a result for the mcpS or PA2652 construct with this assay since the colonies observed have a range of shapes at different attractant concentrations.</p>
-
<p><h2>Quantitative Analysis</h2></p>
+
-
<b>Capillary assay</b>
+
-
<p> In comparison to qualitative assays, quantitative assays are more informative as they provide cell count based on different attractant concentrations and therefore allow identification of the optimal attractant concentration for bacterial chemotaxis. Our analyses were based on the high throughput capillary assay (2). We have modified this assay to obtain cell count through flow cytometer in contrast to commonly used CFU count. The assay itself is based on a number of capillaries filled with different concentrations of attractant placed into bacterial suspension for a period of 30 minutes. Even though the assay itself sounds simple, the set up was proven to be very difficult to lead us to obtain any data.</p>
+
-
<div class="imgbox" style="width:320px; float:right;">
+
-
<img class="border" src="https://static.igem.org/mediawiki/igem.org/5/54/Small_ICL_robotix_capillaries.jpg" width="300px"/>
+
-
<p><i>Figure 9: High through-put capillary assay</i></p>
+
-
<p><h2>Behavioral analysis</h2></p>
+
<p><h2>2.3 Quantitative Analysis <a href="https://2011.igem.org/Team:Imperial_College_London/Protocols_Chemotaxis"><img src="https://static.igem.org/mediawiki/2011/5/58/ICL_ProtocolIconDark.png" width="140px" align="right"/> </a></h2></p>
-
<iframe width="420" height="315" src="http://www.youtube.com/embed/cgUZJvaeQkA" frameborder="0" allowfullscreen></iframe><p><i>Video 1: Mixed population of GFP expressing control and non GFP labelled PA2652 expressing E. coli.</i><p>
+
<br>
-
<h2>2. Tests for uptake of bacteria into roots</h2>
+
-
<h2>Wednesday, 3 August 2011</h2>
+
-
<p>One important part of our project is uptake of our bacteria into plant roots. The observation that this occurs (albeit under controlled lab settings) is new and was only published last year. We attempted to replicate these findings.</p>
+
-
<p>In preparation, we met with Dr Martin Spitaler who advised us on how to prepare samples for the confocal microscopy. Confocal microscopy is much more precise than conventional light field microscopy as it eliminates background light by focusing the laser through a pinhole (Mark Scott, oral communication). The confocal microscopy will focus on imaging GFP expressing bacteria inside Arabidopsis roots to show that uptake of the bacteria takes place. </p>
+
<div class="imgbox" style="width:420px; float:right;" >
 +
<img class="border" src="https://static.igem.org/mediawiki/2011/9/9d/ICL_capillary_assay_explained.png" width="400px" />
 +
<p><i>Figure 10: Outline of the sample setup for the capillary assay. Diagram by Imperial iGEM 2011.</i></p>
 +
</div>
-
<p>Staining of wt roots with DiD, a lipophilic dye that stains the plant membranes and does not interfere with the absorption or emission spectra of GFP and Dendra, was unsuccessful. However, natural fluorescence was measured in a root in a spectrum that does not interfere with measuring GFP. We should therefore not need to dye the roots before imaging.</p>
+
<p> In comparison to qualitative assays, quantitative assays are more informative as they provide cell count based on different attractant concentrations and therefore allow identification of the optimal attractant concentration for chemotaxis. Our analyses were based on the high-throughput capillary assay<sup>[3]</sup>. We wanted to perform data collection using two different cell count methods. One was the traditional CFU (colony forming unit) count, which allows us to normalise the data to a number of cells chemotaxing per mililitre.
-
<iframe width="420" height="345" src="http://www.youtube.com/embed/EqLCzVaBGI0?rel=0" frameborder="0" allowfullscreen></iframe><iframe width="420" height="345" src="http://www.youtube.com/embed/Q60tsCjfH4c?rel=0" frameborder="0" allowfullscreen></iframe>
+
<p>The other method was based on modern flow cytometry using BD FACScan, which allows us to refer to number of cells per capillary. We tried to use both methods, however due to the high sensitivity of the flow cytometer and the small size of <i>E. coli</i> cells, it was difficult to identify the cells among the particles of the same size which occured in the flow count. Due to this fact we used CFU count for quantification. The assay itself is based on a number of capillary tubes filled with different concentrations of attractant placed into bacterial suspension for a period of 60 minutes. During this period, bacteria containing the PA2652 construct (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>) are expected to swim up the capillary and the cell count can be measured. When performing the capillary assay, the capillaries with different attractant concentrations were exposed to bacterial suspensions containing 6x10<sup>8</sup> cells/mL.</p>
 +
<br>
-
<p><i>Stack of wt Arabidopsis root. The root can be imaged at around 488nm. Imaging carried out by Dr Martin Spitaler.</i></p>
+
<p><i>Table 2: The concentrations of tested malate attractant.</i></p>
-
<p>We may also try to stain the roots with propidium iodide, which is also a strong indicator of cell wall break down. </p>
+
<table border="1" style="margin-left:20px;">
 +
  <tr>
 +
<td><p>Test concentrations</p></td>
 +
<td><p>0 mM</p></td>
 +
<td><p>0.0001 mM</p></td>
 +
<td><p>0.01 mM</p></td>
 +
<td><p>1 mM</p></td>
 +
<td><p>100 mM</p></td>
 +
  </tr>
 +
</table>
 +
<br>
 +
<div class="imgbox" style="width:920px;" >
 +
<img class="border" src="https://static.igem.org/mediawiki/2011/2/22/ICL_CFU_final_graph.png" width="900px" />
 +
<p><i>Figure 11: Dependence of bacterial chemotaxis to varied malate concetrations. Cells containing PA2652 (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>) have shown inreased number of cells in capillaries with inreasing malate concentration, with a peak at 1 mM. The number of cells drops sharply after 1 mM due to saturation. Negative control were cells without contruct. The cell count for negative control in each of the capillaries with increasing attractant concentration has not increased. Data collected by Imperial iGEM 2011.</i></p>
 +
</div>
-
<h2>Thursday, 4 August 2011</h2>
+
<p><b>Figure 11</b> shows that <i>E. coli DH5α</i> with the construct PA2652 is capable of chemotactic response towards L(-)malic acid. Due to the quantitative nature of the assay, we can also see the extent to which cells perform chemotaxis towards a chemoattractant. The highest response towards attractant can be seen at 1 mM malate concentration. Also we can conclude that bacteria without construct are not capable of performing chemotaxis towards malate as the cell count of the control did not increase at any of tested malate concentrations. This shows the functionality of our construct (<a href="http://partsregistry.org/Part:BBa_K515102"><b>BBa_K515102</b></a>).</p>
-
<p>We prepared the GFP-expressing bacteria for plant infection. They were spun down and media was exchanged prior to incubation at 37°C to reach exponential phase. Bacteria were then spun down and resuspended in wash buffer (5mM MES) to reach OD 30. 8ml, 4ml and 2ml were added to separate flasks, containing 100ml of half-MS media each. 4ml and 6ml of wash buffer were added to the flasks containing 4ml and 2ml bacteria, respectively. 8ml of wash buffer was added to the negative control. Ten Arabidopsis seedlings were distributed into each of the flasks. Incubation was carried out for 15 hours prior to imaging.</p>
+
<div class="imgbox" style="width:420px;float:right;">
 +
<img class="border" src="https://static.igem.org/mediawiki/2011/0/0a/ICL_FACS_machine.png" width="400px" />
 +
<p><i>Figure 12: BD FACScan could be used to improve data collection from the capillary assay. (Image by Imperial College London iGEM team 2011).</i></p>
 +
</div>
 +
<p> After confirming that our construct works, we want to test whether our <i>E. coli</i> cells can respond to concentrations of malate released by the roots. The concentration of malate released from the root depends on soil acidity, which in turn is linked to soil NO<sub>3</sub><sup>-</sup> levels. In alkaline soils (low in NO<sub>3</sub><sup>-</sup>) plants have unbalanced excess cation uptake<sup>[4]</sup>. In this case the concentration of malate released from the roots is 10<sup>-6</sup> M. In neutral soils, where plants have balanced cation/anion or in acidic soils, where plants have unbalanced excess anion uptake, the concentration of malate secreted is lower<sup>[5]</sup>.</p>
 +
<p>We are currently testing the chemotactic response of our chassis to physiologically relevant malate concentration levels below 10<sup>-6</sup> M. To obtain these results we have reassessed the data collection method based on flow cytometry, because this should speed up the process of data collection and accuracy. To distinguish our bacteria from the background particles we have cotransformed our chassis with a low copy plasmid pTAC1 containing GFP, so our cells can be uniquely visualised using flow cytometer even if their size is similar to the size of backround particles. Hopefully this new strategy will produce results for presentation in Boston.</p>
 +
<br>
 +
<br>
 +
<p style="text-align:right;font-size:1.3em;"><a href="#" class="collapseLink" onClick="ddaccordion.collapseone('technology', 1); return false">Collapse</a></p>
 +
</div>
-
<h2>Friday, 5 August 2011</h2>
+
<div class="technology">3. Uptake of bacteria into roots</div>
-
<p>Prior to imaging, roots were washed in PBS to wash off bacteria and facilitate imaging. We imaged the plants incubated with 8ml of bacteria and were able to find bacteria inside one of the roots. A 3D picture was taken of uninfected roots and roots containing bacteria by taking a Z stackk image using confocal microscopy. </p>
+
<div class="thelanguage">
-
<iframe width="420" height="345" src="http://www.youtube.com/embed/2uBDtF6CyTI?rel=0" frameborder="0" allowfullscreen></iframe>
+
<div class="imgbox" style="width:370px; float:right;margin-top:10px;">
 +
<img class="border" src="https://static.igem.org/mediawiki/2011/b/b7/Awesome_bac_in_roots_16bit.png" width="350px"/>
 +
<p><i>Figure 13: GFP-expressing </i>E. coli<i> cells inside </i>Arabidopsis<i> roots (data and imaging by Imperial College iGEM 2011).</i></p>
 +
</div>
 +
<p>One important part of our project is the uptake of our bacteria into plant roots. The observation that this occurs in both <i>Arabidopsis</i> and tomatoes and that both <i>E. coli</i> and the yeast <i>Saccharomyces cerevisiae</i> can be taken up by roots (albeit under controlled lab settings) is new and was only published last year<sup>[4]</sup>.
-
<p><i>This video shows an image put together from successive images taken at different depth levels. The GFP-expressing bacteria are clearly visible within the root.</i></p>
+
<p>As the amount of IAA needed for enhancing plant growth depends on whether our bacteria are producing the compound outside or inside the plants, we attempted to replicate these findings.</p>
-
<p>We also imaged roots that did not contain bacteria via a similar Z-stack scan. This image is shown below.</p>
+
-
<iframe width="420" height="345" src="http://www.youtube.com/embed/lB-NEoo8Nx0?rel=0" frameborder="0" allowfullscreen></iframe>
+
-
<p>We repeated this experiment at a later date with plants that had been allowed to grow for a longer period of time. The bacteria were predominantly found in root hairs and inside of cells on the root surface.</p>
 
-
<img src="https://static.igem.org/mediawiki/igem.org/b/bf/Gfpinroot10xnostack.jpg" width=450/>
 
-
<h3>3. Tracking of cell viability using Dendra</h3>
+
<p>In preparation for confocal imaging, we met with Dr Martin Spitaler and Mark Scott who advised us on how to prepare samples and image them. Confocal microscopy is much more precise than conventional light field microscopy as it eliminates background light by focusing the laser through a pinhole (Mark Scott, oral communication). The confocal microscopy we conducted was focused on imaging GFP expressing bacteria inside <i>Arabidopsis</i> roots to show that uptake of the bacteria takes place. </p>
-
<p>Dendra-expressing bacteria were also taken up into plant roots. Using a confocal microscope, we photoconverted the Dendra protein from green to red fluorescence. Conversion with the 405nm laser was completed after about 15 rounds of bleaching at 50% laser intensity with the pinhole set to 3 airy units.</p>
+
 
-
<img src="https://static.igem.org/mediawiki/igem.org/a/af/Dendra_conversion_graph2.png" width=1000/>
+
<p>In an imaging trial run we found that natural fluorescence can be measured in roots in a spectrum that does not interfere with measuring the superfolder GFP expressed by our <i>E. coli</i> cells. In addition, the autofluorescence is strong enough to enable us to identify individual cells <b>(Video 2)</b>. We did therefore not need to dye the roots before imaging.</p>
-
<p><i>Dendra photoconversion in bacteria taken up inside plant roots. 1 is the area photoconverted using the 405nm laser. 2 is an individual bacterium whose Dendra protein has undergone photoconversion. 3 is a negative control consisting of a non-photoconverted bacterium. The bacteria found inside the roots can be seen on the right. The data on the left displays the conversion from green to red fluorescence for the highlighted areas. Ch2: emission in green spectrum. Ch3: emission in red spectrum. ChD: brightfield emission.</i></p>
+
<br><br><br><br>
 +
 
 +
<div class="imgbox" style="width:590px;margin:0 auto;">
 +
<iframe width="560" height="315" src="http://www.youtube.com/embed/1vk3NJhbSOY?rel=0" frameborder="0" allowfullscreen></iframe>
 +
<p><i>Video 2: Stack of wt </i>Arabidopsis<i> root. The root can be imaged at around 488 nm. Imaging carried out by Dr Martin Spitaler for Imperial College team iGEM 2011.</i></p>
 +
</div>
 +
<br/>
 +
 
 +
 
 +
 
 +
 
 +
<p>In order to prepare the GFP-expressing bacteria for plant uptake, they were spun down and media was exchanged prior to incubation at 37°C to reach exponential phase. Bacteria were then spun down and resuspended in wash buffer (5 mM MES) to reach OD 30. 8 ml, 4 ml and 2 ml were added to separate flasks, containing 100 ml of half-MS media each. 4 ml and 6 ml of wash buffer were added to the flasks containing 4 ml and 2 ml bacteria, respectively. 8 ml of wash buffer was added to the negative control. Ten <i>Arabidopsis</i> seedlings were distributed into each of the flasks. Incubation was carried out for 15 hours prior to imaging.</p>
 +
 
 +
 
 +
 
 +
<p>Prior to imaging, roots were washed in PBS to wash off bacteria and facilitate imaging. We imaged the plants incubated with 8 ml of bacteria and were able to find bacteria inside one of the roots. A 3D picture was taken of uninfected roots and roots containing bacteria by taking a Z stack image using confocal microscopy <b>(Video 3)</b>. </p>
 +
<div class="imgbox" style="width:590px;margin:0 auto;">
 +
<iframe width="560" height="315" src="http://www.youtube.com/embed/HSp1JYj9FL0?rel=0" frameborder="0" allowfullscreen></iframe>
 +
<p><i>Video 3: Bacteria inside of </i>Arabidopsis thaliana<i> roots. These videos were put together using Z-stack images taken on a confocal microscope. These images can be converted into 3D pictures that allow us to verify that the bacteria can indeed be found inside the roots rather than on the surface (data and imaging by Imperial College iGEM 2011).</i></p>
 +
</div>
 +
<br/>
 +
 
 +
 
 +
 
 +
 
 +
<p>We repeated this experiment at a later date with plants that had been allowed to grow for a longer period of time. The bacteria were predominantly found in root hairs and inside of cells on the root surface <b>(Figure 11)</b>. These plants were older than the ones previously used for uptake experiments and bacterial uptake was much more predominant.</p>
 +
<p>These results show that we would be able to expose plants to IAA from inside the roots themselves. This is extremely important for assessing the secretion of IAA by our bacteria. Nevertheless, we will need to conduct further uptake experiments in soil and with other plant species to confirm that uptake would be possible in the project's eventual implementation stage.
 +
 
 +
<p style="text-align:right;font-size:1.3em;"><a href="#" class="collapseLink" onClick="ddaccordion.collapseone('technology', 2); return false">Collapse</a></p>
 +
</div>
 +
<div class="technology">4. References</div>
 +
<div class="thelanguage">
 +
<p>[1] National Institute of Health. (no date) <i>Model Organisms for Biomedical Research.</i> [Online]. Available from: http://www.nih.gov/science/models/arabidopsis/index.html [Accessed 21<sup>st</sup> September 2011].</p>
 +
<p>[2] Jain RK and Pandey J (2010) Chemotactic responses. Timmis VKN, ed. Handbook of hydrocarbon and lipid microbiology. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 3933-3955. Available at: http://www.springerlink.com/content/x458521h8420l478/ [Cited September 16, 2011].</p>
 +
<p>[3] Bainer R, Park H and Cluzel P (2003) A high-throughput capillary assay for bacterial chemotaxis. <i>Journal of Microbiological Methods</i> <b>55:</b> 315-319.</p>
 +
<p>[4] Stumpf DK and Burris RH (1981) Organic Acid Contents of Soybean: Age and Source of Nitrogen. <i>Plant Physiology</i> <b>68:</b> 989-991.</p>
 +
<p>[5] Martinoia E and Rentsch D (1994) Malate Compartmentation - Responses to a Complex Metabolism. <i>Annual Review of Plant Physiology and Plant Molecular Biology</i> <b>45:</b> 447-467.</p>
 +
 
 +
<p>[6] Paungfoo-Lonhienne C et al. (2010) Turning the table: plants consume microbes as a source of nutrients.<i>PLoS One</i> <b>5(7):</b> e11915. </p>
 +
 
 +
<p style="text-align:right;font-size:1.3em;"><a href="#" class="collapseLink" onClick="ddaccordion.collapseone('technology', 4); return false">Collapse</a></p>
 +
</div>
 +
<h2>
 +
<a href="https://2011.igem.org/Team:Imperial_College_London/Project_Chemotaxis_Assembly" style="text-decoration:none;color:#728F1D;float:left;">
 +
<img src="https://static.igem.org/mediawiki/2011/8/8e/ICL_PreviousBtn.png" width="40px" style="float;left;"/>
 +
M1: Assembly
 +
</a>
 +
<a href="https://2011.igem.org/Team:Imperial_College_London/Project_Chemotaxis_Future" style="text-decoration:none;color:#728F1D;float:right;">
 +
M1: Future Work
 +
<img src="https://static.igem.org/mediawiki/2011/9/90/ICL_NextBtn.png" width="40px" style="float;right;"/>
 +
</a>
 +
</h2>
 +
<br/>
 +
<br/>
-
<h2>References</h2>
 
-
<p>(1) Jain*, R.K., & Pandey, J. (2010) Chemotactic Responses. V K. N. Timmis, ed. Handbook of Hydrocarbon and Lipid Microbiology. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 3933-3955. Available at: http://www.springerlink.com/content/x458521h8420l478/ [Cited September 16, 2011].</p>
 
-
<p>(2) Bainer, R., Park, H. & Cluzel, P. (2003) A high-throughput capillary assay for bacterial chemotaxis.<i>Journal of Microbiological Methods, 55, pp. 315 - 319.</i> </p>
 
</body>
</body>
</html>
</html>

Latest revision as of 03:45, 29 October 2011




Module 1: Phyto-Route

Chemotaxis is the movement of bacteria based on attraction or repulsion of chemicals. Roots secrete a variety of compounds that E. coli are not attracted to naturally. Accordingly, we engineered a chemoreceptor into our chassis that can sense malate, a common root exudate, so that it can swim towards the root. Additionally, E. coli are actively taken up by plant roots, which will allow targeted IAA delivery into roots by our system.






Testing

Collapse all | Expand all

1. Introduction

The assembled PA2652 construct (BBa_K515102) and non-codon optimised mcpS (in pRK415 backone vector), have been inserted and tested for functionality in E. coli DH5α obtained from New England Biolabs. We carried out several tests in an attempt to characterise the rewired chemotaxis towards L(-)malic acid. We separated testing of chemotaxis towards malate into behavioural, qualitative & quantitative analyses.

To test bacterial uptake into the roots of the plants, we worked with Arabidopsis thaliana to replicate the experiment by Paungfoo-Lonhienne et al[6]. Arabidopsis is a common plant model organism. Its genome has been almost completely sequenced and replicates quickly, producing a large number of seeds. Many different mutant strains have been constructed to study its different characteristics[1]. While Arabidopsis may not represent plant populations naturally occurring in arid areas threatened by desertification, it is a useful model organism which we will be using to study the effect of the auxin plant hormone, indole-3-acetic acid (IAA) on roots, observe chemotaxis towards them, and observe them taking up bacteria as nutrients.

Collapse

2. Bacterial chemotaxis towards malate

2.1 Behavioral analysis


Bacteria perform two types of movement, smooth swimming and tumbling. In the absence of attractant the result of the two movements lead to random walk without directionality. In the presence of a concentration gradient of attractant, the probabilities of the two movements change and lead to the directional movement known as random biased walk.


Video 1: Mixed population of GFP-expressing control and non-GFP labelled PA2652 expressing E. coli. The bacteria have been placed in motility buffer without attractant and therefore there is no observed difference in behaviour between the two. Since no attractant is present, a majority of the bacteria perform tumbling, however there are individual bacteria that perform smooth swimming, a rapid movement. In this video, bacteria decide randomly between tumbling and smooth swimming, which is known as random walk. When bacteria perform chemotactic behaviour towards a concentration gradient(not pictured), the probability of the bacteria performing smooth swimming increases after a transient decrease due to saturation of chemoreceptors. This video has been taken as a set of frames, with one frame per four seconds. Imaging done by Imperial iGEM 2011.

During bacterial movement up a concentration gradient of attractant, the probability of the smooth swimming is higher than that of tumbling. Smooth swimming is a fast, uni-directional movement, whereas tumbling is random and although the speed may not be slow, overall velocity is far less than that of smooth swimming. Due to the complicated assay set up with a concentration gradient, we changed strategy to look for uniformity of the bacterial movement. We expected the cells, which are capable of malate recognition to show much more uniform response than those that do not. The bacteria were grown to mid-exponential phase (OD600 0.4-0.6) before being induced in motility buffer 2 hours prior to observation. Bacteria containing construct PA2652 (BBa_K515102) have been exposed to motility buffer (reference), 10 mM serine (positive control) & 10 mM malate (test). E. coli DH5α without any construct have been exposed to 10 mM malate (negative control). Observations were taken with a Zeiss Axiovert 200 Inverted Fluorescent Microscope and video collection Volocity software. ImageJ plug-in Manual Tracking was used to collect data and Chemotaxis Tool plug-in to analyze the data.


Figure 1: Probability density function of bacterial number at observed velocities. PA2652 cells exposed to 10 mM malate are more than 90% likely to be moving at just over 2 μm/s. PA2652 cells that were exposed to serine were 90% likely to be moving at a velocity just over 2 μm/s. PA2652 cells that were not exposed to attractant were over 70% likely to be moving at 2 μm/s. Cells without BBa_K515102 construct were less than 50% likely to be moving at a velocity between 2 and 4 μm/s. Data depicts difference in response between PA2652 cells, which were and which were not exposed to an attractant. Also cells without construct show lack of uniform response when exposed to 10 mM malate. Data collected by Imperial iGEM 2011.


From the data analysis it seems that the bacteria with construct BBa_K515102, when in 10 mM malate perform a very uniform behaviour. This is also confirmed by positive control cells exposed to 10 mM serine, where the response of cells is also highly uniform. Cells with construct PA2652 without exposure to saturating attractant show less uniform movement than PA2652 cells, whether exposed to malate or serine. Also negative control cells fail to show uniformity in their movement suggesting inability to recognise the saturating medium containing 10 mM malate and therefore, performing their movement randomly.

2.2 Qualitative analysis


Qualitative assays were done to observe the effect of rewiring chemotaxis in E. coli with the engineered constructs PA2652 and mcpS (BBa_K515102).

A number of methods exist that show chemotaxis towards a source [2]. Most of them are based on the properties of semi-solid agar, which allows diffusion of molecules and bacterial movement. We have modified an agar plug assay, which involves plating bacteria at opposite end of attractant on a petri-dish, to observe chemotaxis. The bacteria used were in mid-exponential phase (OD600 0.4-0.6). Cells suspended in the semi-solid agar were positioned 2 cm away from the attractant source and left overnight to grow. At the end of the assay the plates were imaged using Fujifilm LAS-3000 Imager.

This assay was done to show the functional chemotaxis of E. coli DH5α transformed with our PA2652 construct (BBa_K515102) compared to the inability of control E. coli DH5α to do the same. Positive control cells were exposed to increasing concentrations of serine, which is recognised by the endogenous chemoreceptors of E. coli, to observe what the movement we are looking for in cells with our construct. We have also tested cells containing the non-codon optimised mcpS gene for qualitative analysis.

Results from this assay should show clear differences in the shape of colonies formed. Bacteria attracted to the source move and distort the colony into an elliptical, directed shape towards the source. We expect the control colonies to look circular because bacteria are equally likely to swim into any direction.

Table 1: The concentrations of attractant tested

Molar range

0 mM

0.01 mM

0.1 mM

1 mM

10 mM

100 mM

Milimolar range

0 mM

5 mM

10 mM

15 mM

20 mM

25 mM


Positive control

Figure 2: Increasing concentrations of serine were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM – rendered void due to mis-handling with semi-solid agar d) 1 mM - circular colony e) 10 mM - elliptical colony f) 100 mM - elliptical colony away from the attractant due to saturation. Data collected by Imperial iGEM 2011.

Figure 3: Increasing concentrations of serine were tested. a) 0 mM control - circular colony, b)5 mM - elliptical colony c) 10 mM - elliptical colony d) 15 mM - elliptical colony e) 20 mM - elliptical colony f) 25mM - elliptical colony.Data collected by Imperial iGEM 2011.

Negative control

Figure 4: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM - circular colony d) 1 mM - circular colony e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.

Figure 5: Increasing concentrations of malate were tested. a) 0 M control - circular colony b)5 mM - circular colony c) 10 mM - circular colony d) 15 mM - circular colony e) 20 mM - circular colony, f) 25mM - circular colony. Data collected by Imperial iGEM 2011.

McpS - pRK415

Figure 6: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM - circular colony d) 1 mM - circular colony e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.

Figure 7: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b)5 mM - circular colony c) 10 mM - elliptical colony formed not in the direction expected d) 15 mM - possible elliptical colony e) 20 mM - possible elliptical colony f) 25 mM - circular colony. Data collected by Imperial iGEM 2011.

PA2652 - BBa_K515102

Figure 8: Increasing concentrations of malate were tested. a) 0 M control - circular colony b) 0.01 mM - possible elliptical colony the shape is hard to analyze c) 0.1 mM - strange shape of colony observed, we cannot explain this phenomenon d) 1 mM - colony shape is not perfectly circular however not elliptical either e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.

Figure 9: Icreasing concentrations of serine were tested. a) 0 mM control - circular colony b)5 mM - colony shape was rendered void due to mishandling with semi-solid agar c) 10 mM - possible elliptical shape colony d) 15 mM - circular colony e) 20 mM - colony shape was rendered void due to mishandling with semi - solid agar f) 25mM - circular colony. Data collected by Imperial iGEM 2011.

Upon analysis of the data, a definitive conclusion could not be drawn. This is due to a number of factors in the setup of the assay. Attractant is localised, and it diffuses in all directions, however the plate is finite and therefore loss of concentration gradient occurs over time. Another factor is the semi-solid agar itself, a medium which is very difficult to manipulate. Although the results were vague, a number of points can be drawn. Positive controls have shown that E. coli DH5α are capable of chemotaxis. They have also shown that when the added serine concentration is too high (10-1 M), bacteria do not swim directly towards the attractant source because the surrounding medium is saturated. Instead they perform chemotaxis in a direction towards which the attractant concentration does not saturate the chemoreceptors. This movement still occurs regardless of the fact that the bacteria are moving away from the attractant source. Negative controls have shown that at any tested concentration of L(-)malic acid, E. coli DH5α without PA2652 or mcpS construct do not perform chemotaxis towards attractant. We could not conclude a result for the mcpS or PA2652 construct with this assay since the colonies observed have a range of shapes at different attractant concentrations.

2.3 Quantitative Analysis


Figure 10: Outline of the sample setup for the capillary assay. Diagram by Imperial iGEM 2011.

In comparison to qualitative assays, quantitative assays are more informative as they provide cell count based on different attractant concentrations and therefore allow identification of the optimal attractant concentration for chemotaxis. Our analyses were based on the high-throughput capillary assay[3]. We wanted to perform data collection using two different cell count methods. One was the traditional CFU (colony forming unit) count, which allows us to normalise the data to a number of cells chemotaxing per mililitre.

The other method was based on modern flow cytometry using BD FACScan, which allows us to refer to number of cells per capillary. We tried to use both methods, however due to the high sensitivity of the flow cytometer and the small size of E. coli cells, it was difficult to identify the cells among the particles of the same size which occured in the flow count. Due to this fact we used CFU count for quantification. The assay itself is based on a number of capillary tubes filled with different concentrations of attractant placed into bacterial suspension for a period of 60 minutes. During this period, bacteria containing the PA2652 construct (BBa_K515102) are expected to swim up the capillary and the cell count can be measured. When performing the capillary assay, the capillaries with different attractant concentrations were exposed to bacterial suspensions containing 6x108 cells/mL.


Table 2: The concentrations of tested malate attractant.

Test concentrations

0 mM

0.0001 mM

0.01 mM

1 mM

100 mM


Figure 11: Dependence of bacterial chemotaxis to varied malate concetrations. Cells containing PA2652 (BBa_K515102) have shown inreased number of cells in capillaries with inreasing malate concentration, with a peak at 1 mM. The number of cells drops sharply after 1 mM due to saturation. Negative control were cells without contruct. The cell count for negative control in each of the capillaries with increasing attractant concentration has not increased. Data collected by Imperial iGEM 2011.

Figure 11 shows that E. coli DH5α with the construct PA2652 is capable of chemotactic response towards L(-)malic acid. Due to the quantitative nature of the assay, we can also see the extent to which cells perform chemotaxis towards a chemoattractant. The highest response towards attractant can be seen at 1 mM malate concentration. Also we can conclude that bacteria without construct are not capable of performing chemotaxis towards malate as the cell count of the control did not increase at any of tested malate concentrations. This shows the functionality of our construct (BBa_K515102).

Figure 12: BD FACScan could be used to improve data collection from the capillary assay. (Image by Imperial College London iGEM team 2011).

After confirming that our construct works, we want to test whether our E. coli cells can respond to concentrations of malate released by the roots. The concentration of malate released from the root depends on soil acidity, which in turn is linked to soil NO3- levels. In alkaline soils (low in NO3-) plants have unbalanced excess cation uptake[4]. In this case the concentration of malate released from the roots is 10-6 M. In neutral soils, where plants have balanced cation/anion or in acidic soils, where plants have unbalanced excess anion uptake, the concentration of malate secreted is lower[5].

We are currently testing the chemotactic response of our chassis to physiologically relevant malate concentration levels below 10-6 M. To obtain these results we have reassessed the data collection method based on flow cytometry, because this should speed up the process of data collection and accuracy. To distinguish our bacteria from the background particles we have cotransformed our chassis with a low copy plasmid pTAC1 containing GFP, so our cells can be uniquely visualised using flow cytometer even if their size is similar to the size of backround particles. Hopefully this new strategy will produce results for presentation in Boston.



Collapse

3. Uptake of bacteria into roots

Figure 13: GFP-expressing E. coli cells inside Arabidopsis roots (data and imaging by Imperial College iGEM 2011).

One important part of our project is the uptake of our bacteria into plant roots. The observation that this occurs in both Arabidopsis and tomatoes and that both E. coli and the yeast Saccharomyces cerevisiae can be taken up by roots (albeit under controlled lab settings) is new and was only published last year[4].

As the amount of IAA needed for enhancing plant growth depends on whether our bacteria are producing the compound outside or inside the plants, we attempted to replicate these findings.

In preparation for confocal imaging, we met with Dr Martin Spitaler and Mark Scott who advised us on how to prepare samples and image them. Confocal microscopy is much more precise than conventional light field microscopy as it eliminates background light by focusing the laser through a pinhole (Mark Scott, oral communication). The confocal microscopy we conducted was focused on imaging GFP expressing bacteria inside Arabidopsis roots to show that uptake of the bacteria takes place.

In an imaging trial run we found that natural fluorescence can be measured in roots in a spectrum that does not interfere with measuring the superfolder GFP expressed by our E. coli cells. In addition, the autofluorescence is strong enough to enable us to identify individual cells (Video 2). We did therefore not need to dye the roots before imaging.





Video 2: Stack of wt Arabidopsis root. The root can be imaged at around 488 nm. Imaging carried out by Dr Martin Spitaler for Imperial College team iGEM 2011.


In order to prepare the GFP-expressing bacteria for plant uptake, they were spun down and media was exchanged prior to incubation at 37°C to reach exponential phase. Bacteria were then spun down and resuspended in wash buffer (5 mM MES) to reach OD 30. 8 ml, 4 ml and 2 ml were added to separate flasks, containing 100 ml of half-MS media each. 4 ml and 6 ml of wash buffer were added to the flasks containing 4 ml and 2 ml bacteria, respectively. 8 ml of wash buffer was added to the negative control. Ten Arabidopsis seedlings were distributed into each of the flasks. Incubation was carried out for 15 hours prior to imaging.

Prior to imaging, roots were washed in PBS to wash off bacteria and facilitate imaging. We imaged the plants incubated with 8 ml of bacteria and were able to find bacteria inside one of the roots. A 3D picture was taken of uninfected roots and roots containing bacteria by taking a Z stack image using confocal microscopy (Video 3).

Video 3: Bacteria inside of Arabidopsis thaliana roots. These videos were put together using Z-stack images taken on a confocal microscope. These images can be converted into 3D pictures that allow us to verify that the bacteria can indeed be found inside the roots rather than on the surface (data and imaging by Imperial College iGEM 2011).


We repeated this experiment at a later date with plants that had been allowed to grow for a longer period of time. The bacteria were predominantly found in root hairs and inside of cells on the root surface (Figure 11). These plants were older than the ones previously used for uptake experiments and bacterial uptake was much more predominant.

These results show that we would be able to expose plants to IAA from inside the roots themselves. This is extremely important for assessing the secretion of IAA by our bacteria. Nevertheless, we will need to conduct further uptake experiments in soil and with other plant species to confirm that uptake would be possible in the project's eventual implementation stage.

Collapse

4. References

[1] National Institute of Health. (no date) Model Organisms for Biomedical Research. [Online]. Available from: http://www.nih.gov/science/models/arabidopsis/index.html [Accessed 21st September 2011].

[2] Jain RK and Pandey J (2010) Chemotactic responses. Timmis VKN, ed. Handbook of hydrocarbon and lipid microbiology. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 3933-3955. Available at: http://www.springerlink.com/content/x458521h8420l478/ [Cited September 16, 2011].

[3] Bainer R, Park H and Cluzel P (2003) A high-throughput capillary assay for bacterial chemotaxis. Journal of Microbiological Methods 55: 315-319.

[4] Stumpf DK and Burris RH (1981) Organic Acid Contents of Soybean: Age and Source of Nitrogen. Plant Physiology 68: 989-991.

[5] Martinoia E and Rentsch D (1994) Malate Compartmentation - Responses to a Complex Metabolism. Annual Review of Plant Physiology and Plant Molecular Biology 45: 447-467.

[6] Paungfoo-Lonhienne C et al. (2010) Turning the table: plants consume microbes as a source of nutrients.PLoS One 5(7): e11915.

Collapse

M1: Assembly M1: Future Work