The assembled PA2652 construct (BBa_K515102) and non-codon optimised mcpS (in pRK415 backone vector), have been inserted and tested for functionality in E. coli DH5α obtained from New England Biolabs. We carried out several tests in an attempt to characterise the rewired chemotaxis towards L(-)malic acid. We separated testing of chemotaxis towards malate into behavioural, qualitative & quantitative analyses.

To test bacterial uptake into the roots of the plants, we worked with Arabidopsis thaliana to replicate the experiment by Paungfoo-Lonhienne et al^[6]. Arabidopsis is a common plant model organism. Its genome has been almost completely sequenced and replicates quickly, producing a large number of seeds. Many different mutant strains have been constructed to study its different characteristics^[1]. While Arabidopsis may not represent plant populations naturally occurring in arid areas threatened by desertification, it is a useful model organism which we will be using to study the effect of the auxin plant hormone, indole-3-acetic acid (IAA) on roots, observe chemotaxis towards them, and observe them taking up bacteria as nutrients.

Collapse

2.1 Behavioral analysis

Bacteria perform two types of movement, smooth swimming and tumbling. In the absence of attractant the result of the two movements lead to random walk without directionality. In the presence of a concentration gradient of attractant, the probabilities of the two movements change and lead to the directional movement known as random biased walk.

During bacterial movement up a concentration gradient of attractant, the probability of the smooth swimming is higher than that of tumbling. Smooth swimming is a fast, uni-directional movement, whereas tumbling is random and although the speed may not be slow, overall velocity is far less than that of smooth swimming. Due to the complicated assay set up with a concentration gradient, we changed strategy to look for uniformity of the bacterial movement. We expected the cells, which are capable of malate recognition to show much more uniform response than those that do not. The bacteria were grown to mid-exponential phase (OD₆₀₀ 0.4-0.6) before being induced in motility buffer 2 hours prior to observation. Bacteria containing construct PA2652 (BBa_K515102) have been exposed to motility buffer (reference), 10 mM serine (positive control) & 10 mM malate (test). E. coli DH5α without any construct have been exposed to 10 mM malate (negative control). Observations were taken with a Zeiss Axiovert 200 Inverted Fluorescent Microscope and video collection Volocity software. ImageJ plug-in Manual Tracking was used to collect data and Chemotaxis Tool plug-in to analyze the data.

Figure 1: Probability density function of bacterial number at observed velocities. PA2652 cells exposed to 10 mM malate are more than 90% likely to be moving at just over 2 μm/s. PA2652 cells that were exposed to serine were 90% likely to be moving at a velocity just over 2 μm/s. PA2652 cells that were not exposed to attractant were over 70% likely to be moving at 2 μm/s. Cells without BBa_K515102 construct were less than 50% likely to be moving at a velocity between 2 and 4 μm/s. Data depicts difference in response between PA2652 cells, which were and which were not exposed to an attractant. Also cells without construct show lack of uniform response when exposed to 10 mM malate. Data collected by Imperial iGEM 2011.

From the data analysis it seems that the bacteria with construct BBa_K515102, when in 10 mM malate perform a very uniform behaviour. This is also confirmed by positive control cells exposed to 10 mM serine, where the response of cells is also highly uniform. Cells with construct PA2652 without exposure to saturating attractant show less uniform movement than PA2652 cells, whether exposed to malate or serine. Also negative control cells fail to show uniformity in their movement suggesting inability to recognise the saturating medium containing 10 mM malate and therefore, performing their movement randomly.

2.2 Qualitative analysis

Qualitative assays were done to observe the effect of rewiring chemotaxis in E. coli with the engineered constructs PA2652 and mcpS (BBa_K515102).

A number of methods exist that show chemotaxis towards a source ^[2]. Most of them are based on the properties of semi-solid agar, which allows diffusion of molecules and bacterial movement. We have modified an agar plug assay, which involves plating bacteria at opposite end of attractant on a petri-dish, to observe chemotaxis. The bacteria used were in mid-exponential phase (OD₆₀₀ 0.4-0.6). Cells suspended in the semi-solid agar were positioned 2 cm away from the attractant source and left overnight to grow. At the end of the assay the plates were imaged using Fujifilm LAS-3000 Imager.

This assay was done to show the functional chemotaxis of E. coli DH5α transformed with our PA2652 construct (BBa_K515102) compared to the inability of control E. coli DH5α to do the same. Positive control cells were exposed to increasing concentrations of serine, which is recognised by the endogenous chemoreceptors of E. coli, to observe what the movement we are looking for in cells with our construct. We have also tested cells containing the non-codon optimised mcpS gene for qualitative analysis.

Results from this assay should show clear differences in the shape of colonies formed. Bacteria attracted to the source move and distort the colony into an elliptical, directed shape towards the source. We expect the control colonies to look circular because bacteria are equally likely to swim into any direction.

Table 1: The concentrations of attractant tested

Positive control

Figure 2: Increasing concentrations of serine were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM – rendered void due to mis-handling with semi-solid agar d) 1 mM - circular colony e) 10 mM - elliptical colony f) 100 mM - elliptical colony away from the attractant due to saturation. Data collected by Imperial iGEM 2011.

Figure 3: Increasing concentrations of serine were tested. a) 0 mM control - circular colony, b)5 mM - elliptical colony c) 10 mM - elliptical colony d) 15 mM - elliptical colony e) 20 mM - elliptical colony f) 25mM - elliptical colony.Data collected by Imperial iGEM 2011.

Negative control

Figure 4: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM - circular colony d) 1 mM - circular colony e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.

Figure 5: Increasing concentrations of malate were tested. a) 0 M control - circular colony b)5 mM - circular colony c) 10 mM - circular colony d) 15 mM - circular colony e) 20 mM - circular colony, f) 25mM - circular colony. Data collected by Imperial iGEM 2011.

McpS - pRK415

Figure 6: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b) 0.01 mM - circular colony c) 0.1 mM - circular colony d) 1 mM - circular colony e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.

Figure 7: Increasing concentrations of malate were tested. a) 0 mM control - circular colony b)5 mM - circular colony c) 10 mM - elliptical colony formed not in the direction expected d) 15 mM - possible elliptical colony e) 20 mM - possible elliptical colony f) 25 mM - circular colony. Data collected by Imperial iGEM 2011.

PA2652 - BBa_K515102

Figure 8: Increasing concentrations of malate were tested. a) 0 M control - circular colony b) 0.01 mM - possible elliptical colony the shape is hard to analyze c) 0.1 mM - strange shape of colony observed, we cannot explain this phenomenon d) 1 mM - colony shape is not perfectly circular however not elliptical either e) 10 mM - circular colony f) 100 mM - circular colony. Data collected by Imperial iGEM 2011.

Figure 9: Icreasing concentrations of serine were tested. a) 0 mM control - circular colony b)5 mM - colony shape was rendered void due to mishandling with semi-solid agar c) 10 mM - possible elliptical shape colony d) 15 mM - circular colony e) 20 mM - colony shape was rendered void due to mishandling with semi - solid agar f) 25mM - circular colony. Data collected by Imperial iGEM 2011.

Upon analysis of the data, a definitive conclusion could not be drawn. This is due to a number of factors in the setup of the assay. Attractant is localised, and it diffuses in all directions, however the plate is finite and therefore loss of concentration gradient occurs over time. Another factor is the semi-solid agar itself, a medium which is very difficult to manipulate. Although the results were vague, a number of points can be drawn. Positive controls have shown that E. coli DH5α are capable of chemotaxis. They have also shown that when the added serine concentration is too high (10^-1 M), bacteria do not swim directly towards the attractant source because the surrounding medium is saturated. Instead they perform chemotaxis in a direction towards which the attractant concentration does not saturate the chemoreceptors. This movement still occurs regardless of the fact that the bacteria are moving away from the attractant source. Negative controls have shown that at any tested concentration of L(-)malic acid, E. coli DH5α without PA2652 or mcpS construct do not perform chemotaxis towards attractant. We could not conclude a result for the mcpS or PA2652 construct with this assay since the colonies observed have a range of shapes at different attractant concentrations.

2.3 Quantitative Analysis

In comparison to qualitative assays, quantitative assays are more informative as they provide cell count based on different attractant concentrations and therefore allow identification of the optimal attractant concentration for chemotaxis. Our analyses were based on the high-throughput capillary assay^[3]. We wanted to perform data collection using two different cell count methods. One was the traditional CFU (colony forming unit) count, which allows us to normalise the data to a number of cells chemotaxing per mililitre. The other method was based on modern flow cytometry using BD FACScan, which allows us to refer to number of cells per capillary. However upon encountering difficulties when performing assays we have reverted to just using tested CFU count. The assay itself is based on a number of capillary tubes filled with different concentrations of attractant placed into bacterial suspension for a period of 60 minutes. During this period, bacteria containing PA2652 construct (BBa_K515102) are expected to swim up the capillary and the cell count can be measured. When performing the capillary assay, the capillaries with different attractant concentrations were exposed to bacterial suspensions containing 6x10⁸ cells/mL.

Table 2: The concentrations of tested malate attractant.

Figure 10: Dependence of bacterial chemotaxis to varied malate concetrations. Cells containing PA2652 (BBa_K515102) have shown inreased number of cells in capillaries with inreasing malate concentration, with a peak at 1 mM. The number of cells drops sharply after 1 mM due to saturation. Negative control were cells without contruct. The cell count for negative control in each of the capillaries with increasing attractant concentration has not increased. Data collected by Imperial iGEM 2011.

From the graph (Figure 10) obtained it can be seen that E. coli DH5α with construct PA2652 is capable chemotactic response towards L (-) malic acid. Due to the quantitative nature of the assay, it has also informed us of the extent to which cells perform chemotaxis towards a chemoattractant. The highest response towards attractant can be seen at 1 mM malate concentration. Also we can conclude that bacteria without construct are not capable of performing chemotaxis towards malate as the cell count of the control did not increase at any of tested malate concentrations. This shows the functionality of our construct (BBa_K515102).

Figure 11: BD FACScan being used to collect data from capillary assay. This data collection method is innovative compared to the commonly used CFU count. Image by Imperial iGEM 2011.

The response of bacteria to different concentrations of malate is an important result, but it is necessary to test whether our E. coli cells can respond to concentrations of malate released by the roots. The concentration of malate released from the roots is 10^-6 M in the soil that causes plants to have unbalanced excess cation uptake^[4]. In the soils that causes plants to have balanced cation/anion or unbalanced excess anion uptake this concentration is lower^[5]. We are currently testing concentration level below 10^-6 M malate to observe chemotactic response of our chassis. We are also trying to obtain these results using flow cytometry as opposed to CFU count, which should speed up the process of data collection and its accuracy, so that results will be available for presentation in Boston.

Collapse

Figure 12: GFP-expressing E. coli cells inside Arabidopsis roots (data and imaging by Imperial College iGEM 2011).

One important part of our project is the uptake of our bacteria into plant roots. The observation that this occurs in both Arabidopsis and tomatoes and that both E. coli and the yeast Saccharomyces cerevisiae can be taken up by roots (albeit under controlled lab settings) is new and was only published last year^[4].

As the amount of IAA needed for enhancing plant growth depends on whether our bacteria are producing the compound outside or inside the plants, we attempted to replicate these findings.

In preparation for confocal imaging, we met with Dr Martin Spitaler and Mark Scott who advised us on how to prepare samples and image them. Confocal microscopy is much more precise than conventional light field microscopy as it eliminates background light by focusing the laser through a pinhole (Mark Scott, oral communication). The confocal microscopy we conducted was focused on imaging GFP expressing bacteria inside Arabidopsis roots to show that uptake of the bacteria takes place.

In an imaging trial run we found that natural fluorescence can be measured in roots in a spectrum that does not interfere with measuring the superfolder GFP expressed by our E. coli cells. In addition, the autofluorescence is strong enough to enable us to identify individual cells (Video 2). We did therefore not need to dye the roots before imaging.

In order to prepare the GFP-expressing bacteria for plant uptake, they were spun down and media was exchanged prior to incubation at 37°C to reach exponential phase. Bacteria were then spun down and resuspended in wash buffer (5 mM MES) to reach OD 30. 8 ml, 4 ml and 2 ml were added to separate flasks, containing 100 ml of half-MS media each. 4 ml and 6 ml of wash buffer were added to the flasks containing 4 ml and 2 ml bacteria, respectively. 8 ml of wash buffer was added to the negative control. Ten Arabidopsis seedlings were distributed into each of the flasks. Incubation was carried out for 15 hours prior to imaging.

Prior to imaging, roots were washed in PBS to wash off bacteria and facilitate imaging. We imaged the plants incubated with 8 ml of bacteria and were able to find bacteria inside one of the roots. A 3D picture was taken of uninfected roots and roots containing bacteria by taking a Z stack image using confocal microscopy (Video 3).

We repeated this experiment at a later date with plants that had been allowed to grow for a longer period of time. The bacteria were predominantly found in root hairs and inside of cells on the root surface (Figure 11). These plants were older than the ones previously used for uptake experiments and bacterial uptake was much more predominant.

These results show that we would be able to expose plants to IAA from inside the roots themselves. This is extremely important for assessing the secretion of IAA by our bacteria. Nevertheless, we will need to conduct further uptake experiments in soil and with other plant species to confirm that uptake would be possible in the project's eventual implementation stage.

Collapse

[1] National Institute of Health. (no date) Model Organisms for Biomedical Research. [Online]. Available from: http://www.nih.gov/science/models/arabidopsis/index.html [Accessed 21^st September 2011].

[2] Jain RK and Pandey J (2010) Chemotactic responses. Timmis VKN, ed. Handbook of hydrocarbon and lipid microbiology. Berlin, Heidelberg: Springer Berlin Heidelberg, pp. 3933-3955. Available at: http://www.springerlink.com/content/x458521h8420l478/ [Cited September 16, 2011].

[3] Bainer R, Park H and Cluzel P (2003) A high-throughput capillary assay for bacterial chemotaxis. Journal of Microbiological Methods 55: 315-319.

[4] Stumpf DK and Burris RH (1981) Organic Acid Contents of Soybean: Age and Source of Nitrogen. Plant Physiology 68: 989-991.

[5] Martinoia E and Rentsch D (1994) Malate Compartmentation - Responses to a Complex Metabolism. Annual Review of Plant Physiology and Plant Molecular Biology 45: 447-467.

[6] Paungfoo-Lonhienne C et al. (2010) Turning the table: plants consume microbes as a source of nutrients.PLoS One 5(7): e11915.

Collapse