• Introduction
  • Home
  • The Team
  • Photo Gallery
• Our Project
  • Results Summary
  • Selection System
  • In-Vitro Characterization
  • In-Vivo Characterization
  • Microfluidics
  • Data
  • Attributions
• Tools
  • Gibson Assembly
  • MITOMI
• Notebook
  • Protocols
  • May
  • June
  • July
  • August
  • September
  • October
• Considerations
  • Human Practices
  • Safety
• Acknowledgements
  • Sponsors
  • Partners

Klenow dsDNA synthesis

made on 5.07.2011

Materials

• 5’Comp Cy5 primer
  • 5’Cy5-GTC ATA CCG CCG GAGG
  • order from IDT at 1umole, HPLC purified
  • suspend to 500uM

• Library primers:
  • 5’ Linker - BINDING SITE – CCTCCGGCGGTATGAC
  • 5’ Linker generally: CCC

• Klenow Fragment 3’-5’ exo-
  • Order from NEB (Cat #: M0212L)

• dNTPs at 10mM each

Method

• Prepare a master mix without the library primer, and load 28μL into a 96 well plate.
• Add 2μL of Library primer to the 96 well plate.
• Cycle as follows:
  • 37°C for 1 hour
  • 75°C for 20 mins
  • ramp down to 30°C at 0.1°C/sec
  • hold at 4°C

• Alternatively in some cases use:

I will finish it later on ...

Alina

eom

• After the synthesis add 70μL of 0.5% BSA in dH2O to each well and transfer to a 384 well plate (flat bottom). Prepare dilutions as needed using 0.5% BSA dH2O.

• To set up the 384-well plate with 6 dilutions load 30uL 0.5% BSA dH2O into all columns except 1, 7, 13, 19.

• Transfer the column 1 of the klenow reaction (100uL total) to column 1 row A (A1) on the 384 well plate. Perform 5 dilutions of 70uL sample into the adjacent wells containing 30uL BSA dH2O. After the 5th dilution (in column 6) discard the remaining 70uL.

• Transfer column 2 of the klenow plate into A7 and perform dilutions.

• • Column3 -> A13, column 4 -> A19, Column 5->B1, col 6-> B7, col7->B13, col8 -> B19

• You should have 30uL of target DNA in each well of the 384 plate now. Add 30uL of 0.5% BSA dH2O to each well.

• The samples are now ready to be spotted.