Team:HokkaidoU Japan/Project

From 2011.igem.org

(Difference between revisions)
(Bsa I Cloning Site)
 
(38 intermediate revisions not shown)
Line 1: Line 1:
{{Team:HokkaidoU_Japan/header}}
{{Team:HokkaidoU_Japan/header}}
-
 
+
{{Team:HokkaidoU_Japan/Project/LeftContent}}
 +
<div id="hokkaidou-right-content">
=Abstract=
=Abstract=
 +
Bacteria living around us evolved ways to effect their surrounding environment. Some bacteria can change its surroundings by injecting whole protein molecules into targeted eukaryotic cells through Type 3 secretion system (T3SS). During iGEM 2010 we showed that ''E. coli'' containing a part of ''Salmonella'' genome expresses T3SS. We thought this system can be applied to direct reprogramming of somatic cells from eukaryote.
 +
This year we tried to make it more convenient. For this purpose we designed a plasmid backbone which can instantly produce ready-to-inject fusion proteins from biobrick parts. Using it, we tried further characterization of this system by injecting various proteins to see if they can be secreted.
-
We further developed "Dr. E. coli": our [https://2011.igem.org/Team:HokkaidoU_Japan/Project/T3SS project] of iGEM 2010. Last year, we showed that Type 3 Secretion System (T3SS) works in E. coli by injecting GFP into RK13 cells. We thought this system can be applied to direct reprogramming of somatic cells among many other things.  
+
=What`s T3SS?=
 +
T3SS is a system of pathogenic gram-negative bacterium such as ''Salmonella'', ''Yersinia'' and EPEC (entero pathogenic ''E. coli''). Using this system bacteria can inject whole protein molecules through a syringe like organelle named T3S Apparatus. The target of this system is a eukaryotic cell. Naturally it is used to inject virulence effector proteins. Last year, we showed that T3SS works in ''E. coli'' by injecting GFP into RK13 cells.
-
This year we repeated previous competitions experiment, one more time showing that GFP can be really injected into a target cell with it. And then, as a second step, we tested T3SS performance and tried to make it more convenient. For this purpose we designed a plasmid backbone which can instantly produce ready-to-inject fusion proteins from ordinary biobrick part. Using it, we tried to further characterize this system by injecting characteristic proteins to see if they can be secreted and calculate their secretion speed.
+
See [[Team:HokkaidoU_Japan/Project/T3SS|here]] for the details about T3SS and our achievements on iGEM 2010.
-
=Intro=
+
=Injection assay using onion cells=
 +
We developed a new method of injection assay using onion cells to evaluate the functions, which is a easier than using mammalian cultured cells. However it requires some treatments specific to plant cells.
-
Bacteria living around us evolved ways to effect their surrounding environment. This is done by using secretion systems. There are six known types of secretion systems: one through six. These are called Type One Secretion System (T1SS), T2SS, T3SS and so on. Some system only secrete designated proteins outside, others can translocate proteins directly to other cells. Secretion systems able to inject proteins into other cell caught imagination of many researchers.
+
See [[Team:HokkaidoU_Japan/Project/Onion|here]] for the details about Injection assay using onion cells.
-
 
+
-
Ours was no exception. We chose to use T3SS for our experiments. During iGEM 2010 we found that E.Coli with a part of Salmonella genome library expresses T3SS. This presented opportunity to work with the amazing machinery without involving pathogenic bacteria.
+
-
 
+
-
This year we repeated previous competitions experiment, one more time showing that GFP can be really injected into a target cell with it. And then continued to characterise it. An further develop data sheet of T3SS possibilities.
+
-
 
+
-
=Type 3 Secretion System=
+
-
T3SS is a system of pathogenic gram-negative bacterium such as Salmonella, Yersinia and EPEC (entero pathogenic E. coli). Using this system bacteria can inject whole protein molecules through a syringe like organelle named T3S Apparatus. During iGEM 2010 we found that E. coli with a part of Salmonella genome library expresses T3SS functionally.  
+
-
Read more
+
=Plasmid Backbone for protein injection=
=Plasmid Backbone for protein injection=
-
We developed plasmid backbone which can attach tags needed for secretion and various other functions to a chosen protein biobrick. It can be used for big scale screening of various protein domains for their inject-ability.
+
==Bsa I cloning site==
-
Backbone
+
[[File:HokkaidoU_BsaI_Backbone.png|thumb|500px|Fig. 1 Ready-to-inject backbone. SlrP is an T3SS injection signal. Bsa I Cloning Site is used for inserting various BioBricks directly. A protein fused to T3S signal can be expressed under control of constitutive promoter(pTetR).]]
-
 
+
Last year we made injectable GFP as a reporter of injection assay. This year, our project started with an aim to conduct direct reprogramming as an application of T3SS. But first we wanted to try injecting various proteins.
-
[[File:HokkaidoU_Japan_2011_GSK_Backbone_lv.png|thumb|500px|Figure1. A backbone under constitutive promoter(pTetr). Has SlrP as a injection signal, GSK tag, Bsa I Cloning Site. Desired protein can be inserted into the cloning site.]]
+
-
 
+
-
Last year we used T3SS to inject GFP to mammalian cells. This year we wanted to explore T3SS limits. We submitted it to a injectable protein screening. We made a small library of proteins with distinguished structures which were chosen from 2011 Biobrick distribution.
+
-
 
+
-
Assembling each protein, injection signal and tag would have been a laborious task which we didn't want to endure. So ready-to-inject backbones was proposed(Fig.1).
+
-
 
+
-
We designed Bsa I Cloning Site to facilitate quick assembly of proteins to inject. Thus it's name ready-to-inject backbone. All inserts must be PCRed with specific primer to remove stop codon. Of course all inserts will be in-frame.
+
-
 
+
-
See [[#Bsa I Cloning Site|here]] for details.
+
-
 
+
-
Another problem was how check if protein was injected. To solve it we used a distinct property of Glycogen Synthase Kinase 3 β, it is phosphorylated only in eucaryotic cells. This phosphorylation can by detected with phospho-specific antibodies. This property is exhibited by first 13aa of this protein<sup>[[#References|[1]]]</sup> which makes it very small tag. Thus we now can easily detect if protein was injected in eucaryotic cells. Because of it's small size the interference on tag protein should be at minimum.
+
-
 
+
-
See [[#GSK tag|here]] for details.
+
-
+
-
We combining these futures in a backbone and constructed ready-to-inject bakcbone. SlrP is an injection signal, without it the protein cannot be secreted. GSK is a tag, by detecting phosphorylation of it you can distinguish whether it has been it eukaryotic cell. For us it is an evidence of successful injection. Bsa I Cloning Site is used for inserting various BioBrick while retaining the whole constructs BioBrick properties. The whole proteins is under control of pTetr constitutive Promoter.
+
-
 
+
-
We used ready-to-inject backbone to inject five proteins representing different structures and functions to see which get injected. This was are shot to try and characterise T3SS a little bit further.
+
-
 
+
-
See [[#Investigation of T3SS-injectable proteins|here]] for details.
+
-
 
+
-
---brief summary of the injection results---
+
-
 
+
-
=Bsa I Cloning Site=
+
-
+
-
Bsa I Cloning site is unique in a sense that you can clone BioBrick into a middle of a construct and still retain the properties of biobrick. We used it to construct our backbones for T3SS characterization. Bsa I cloning site is valuable part when you need change particular part in the middle of the construct. It was designed that inserted biobrick would be fused to preceding signals.
+
-
 
+
-
Bsa I restriction enzyme is in distinguish group of enzyme which cutting site is different from recognition site. Unlike EcoR  I or Pst I, Bsa I regognizes GGTCTC sequence but cuts the sequence 1 base further ahead of it. Which results in a 5 prime 4 base overhang(Fig). Which is the key future making insertion in the middle of construct possible.
+
-
 
+
-
<pre>
+
-
5'...GGTCTCN^.......3'
+
-
3'...CCAGAGNNNNN^...5'
+
-
</pre>
+
-
 
+
-
You can manipulate the sequence of overhang as you like. By if you construct sequence GGTCTCNAATTN you can make it to ligate with EcoR  I digested strand. As long as NAATTN won't become GAATTG it wouldn't not be digested by EcoR I and that’s the beauty of it.
+
-
 
+
-
Of course there are other restriction endonucleases that exhibit same properties but Bsa I. You cannot use more than one Bsa I cloning site per construct. However, using other enzymes of this kind it is possible to add additional insertion sites per plasmid.
+
-
 
+
-
For our construct we designed a cloning site which when digested with Bsa I will produce Not I like overhang and Spe I like overhang (Fig). Which will ligate to Not I and Spe I but won't be digested after.
+
-
 
+
-
<pre>
+
-
        Bsa I    Not I'          Spe I'  Bsa I
+
-
 
+
-
5'...GG GGTCTC A^GGCC ….........^CTAG A GAGACC...3'
+
-
3'...CC CCAGAG T CCGG^TCCGGCCGCT GATC^T CTCTGG...5'
+
-
 
+
-
5'...GG GGTCTC A                CTAG A GAGACC...3'
+
-
3'...CC CCAGAG T CCGG                T CTCTGG...5'
+
-
</pre>
+
-
 
+
-
However there are some limitations Bsa I. Its not an official biobrick restriction enzyme so you have to screen each whole construct for Bsa I recognition sequences. However no worries are needed for inserts. Because only official restriction enzymes treatment is required for them.
+
-
 
+
-
Usage standard assembly produces in-frame stop codons in scars. We got around this by using PCR to amplify our inserts. We designed amplification primers to insert mutation and remove both remove change stop codon and Xba I restriction site.
+
-
 
+
-
=GSK tag=
+
-
+
-
Glycogen Synthase Kinase 3β (Fig) is known to be phosphorylated by several enzymes in eukaryotic cell. We used first 13 amino acid sequence to construct a tag (GSK tag)<sup>[[#References|[1]]]</sup> which phosphorylation state could be detected. 9th amino acid, serine is phosphorylated in eukaryotic cell(Fig). There are antibodies which bind to only phosphorylated GSK tag using them it is possible to distinguish whether it has been it eukaryotic cell. So you can see proteins which were injected into cell and which were not. This was a vital ingredient in our experiments.
+
-
 
+
-
GSK tag was constructed by Julie Torruellas Garcia,  Gregory V. Plano et al. We removed present Spe I site in the sequence by silent mutation.
+
-
 
+
-
<pre>
+
-
Translation: M  S  G  R  P  R  T  T  S-p  F  A  E  S
+
-
Original  :ATG AGT GGT CGC CCT CGC ACT ACT  AGT TTC GCT GAA AGT
+
-
rm Spe I    :ATG AGT GGT CGC CCT CGC ACT ACA* AGT TTC GCT GAA AGT
+
-
</pre>
+
-
Phosphorylated Serine is shown as S-p.
+
-
 
+
-
GSK tag can be added to N terminus, C terminus<sup>[[#References|[1]]]</sup> and anywhere in between<sup>[[#References|[2]]]</sup> of the protein. We opted to insert it between SlrP secretion tag and the protein we wonted to inject. To SlrP is required to be on CorN terminus. And insertin on  C trminus would have required some costly primers.
+
-
 
+
-
Using non-phosphospecific antibodies it is possible to check the total amount of created tag protein. Comparing it with the injected protein you can determine  the efficiency of the injection.
+
-
 
+
-
By comparing the mass of the protein with GSK tag it is also possible to see if it had been modified in eucaryotic cell. It can be used alongside of TEV site. And can be used as proof TEV protease activity.
+
-
 
+
-
=Investigation of T3SS-injectable proteins=
+
-
 
+
-
Here we will discuss the structure of proteins which are injected and which are not. We tried eight different proteins: mnt repressor, Gal4, RFP, GFP, Cre DNA recombinase, (CCR5) transmembrane, LacI and Luciferase. All were chosen from biobrick distribution which shows their significant importance for iGEM.  
+
-
Our main concern was not with the size the protein but its stability. Previous research show that proteins like Zinc-Finger are were stable and couldn't be injected. Stability prevents unfolding by T3SS chaperons. Our asortment includes Gal4 which is representative of stable proteins.
+
Fusion of signal peptide, required for secretion , to each protein would have been a laborious task. So development of ready-to-inject backbone was anticipated. To accomplish this, we designed Bsa I Cloning Site and developed plasmid backbone which can facilitate quick assembly of to be injected proteins (Fig. 1).
-
We showed that GFP can be injected into eucaryotic cells by confocal laser microscope imaging. Thus in can serve as a control. Next is RFG,  a fluorescent protein bu with different structure from GFP. MNT represor
+
See [[Team:HokkaidoU_Japan/Project/Backbone|here]] for the details about plasmid backbone and Bsa I cloning site.
 +
==GSK Tag system==
 +
[[File:HokkaidoU_Japan_2011_GSK_Backbone_lv.png|thumb|500px|Fig. 2 GSK is a tag for detecting phosphorylation of it in eukaryotic cells.]]
 +
Another problem is how to check if a protein was successfully injected. GFP is easy, but what about the ones that cannot be visualised? To solve this problem, we used a distinct property of Glycogen Synthase Kinase 3β (GSK-3β). It is phosphorylated only in eucaryotic cells. By fusing a small part of GSK-3β as a tag and by detecting its state of phosphorylation, we can know if and what amount of protein has been injected into the eukaryotic cells (Fig. 2).
-
=References=
+
See [[Team:HokkaidoU_Japan/Project/GSK|here]] for the details about GSK tag.
-
# Julie Torruellas Garcia, Franco Ferracci, Michael W. Jackson,1 Sabrina S. Joseph, Isabelle Pattis, Lisa R. W. Plano, Wolfgang Fischer, and Gregory V. Plano. 2006. Measurement of Effector Protein Injection by Type III and Type IV Secretion Systems by Using a 13-Residue Phosphorylatable Glycogen Synthase Kinase Tag. Infect Immun.Vol.74:5645-57. [http://www.ncbi.nlm.nih.gov/pubmed/16988240 PubMed]
+
-
# JWensheng Luo and Michael S. Donnenberg. 2011. Interactions and Predicted Host Membrane Topology of the Enteropathogenic Escherichia coli Translocator Protein EspB. J. Bacteriol.Vol.193:2972–80. [http://www.ncbi.nlm.nih.gov/pubmed/21498649 PubMed]
+
 +
</div>
{{Team:HokkaidoU_Japan/footer}}
{{Team:HokkaidoU_Japan/footer}}

Latest revision as of 10:48, 15 December 2011

Contents

Abstract

Bacteria living around us evolved ways to effect their surrounding environment. Some bacteria can change its surroundings by injecting whole protein molecules into targeted eukaryotic cells through Type 3 secretion system (T3SS). During iGEM 2010 we showed that E. coli containing a part of Salmonella genome expresses T3SS. We thought this system can be applied to direct reprogramming of somatic cells from eukaryote. This year we tried to make it more convenient. For this purpose we designed a plasmid backbone which can instantly produce ready-to-inject fusion proteins from biobrick parts. Using it, we tried further characterization of this system by injecting various proteins to see if they can be secreted.

What`s T3SS?

T3SS is a system of pathogenic gram-negative bacterium such as Salmonella, Yersinia and EPEC (entero pathogenic E. coli). Using this system bacteria can inject whole protein molecules through a syringe like organelle named T3S Apparatus. The target of this system is a eukaryotic cell. Naturally it is used to inject virulence effector proteins. Last year, we showed that T3SS works in E. coli by injecting GFP into RK13 cells.

See here for the details about T3SS and our achievements on iGEM 2010.

Injection assay using onion cells

We developed a new method of injection assay using onion cells to evaluate the functions, which is a easier than using mammalian cultured cells. However it requires some treatments specific to plant cells.

See here for the details about Injection assay using onion cells.

Plasmid Backbone for protein injection

Bsa I cloning site

Fig. 1 Ready-to-inject backbone. SlrP is an T3SS injection signal. Bsa I Cloning Site is used for inserting various BioBricks directly. A protein fused to T3S signal can be expressed under control of constitutive promoter(pTetR).

Last year we made injectable GFP as a reporter of injection assay. This year, our project started with an aim to conduct direct reprogramming as an application of T3SS. But first we wanted to try injecting various proteins.

Fusion of signal peptide, required for secretion , to each protein would have been a laborious task. So development of ready-to-inject backbone was anticipated. To accomplish this, we designed Bsa I Cloning Site and developed plasmid backbone which can facilitate quick assembly of to be injected proteins (Fig. 1).

See here for the details about plasmid backbone and Bsa I cloning site.


GSK Tag system

Fig. 2 GSK is a tag for detecting phosphorylation of it in eukaryotic cells.

Another problem is how to check if a protein was successfully injected. GFP is easy, but what about the ones that cannot be visualised? To solve this problem, we used a distinct property of Glycogen Synthase Kinase 3β (GSK-3β). It is phosphorylated only in eucaryotic cells. By fusing a small part of GSK-3β as a tag and by detecting its state of phosphorylation, we can know if and what amount of protein has been injected into the eukaryotic cells (Fig. 2).

See here for the details about GSK tag.

Retrieved from "http://2011.igem.org/Team:HokkaidoU_Japan/Project"