Team:Imperial College London/Achievements

From 2011.igem.org

Revision as of 12:11, 28 October 2011 by Mingatipat (Talk | contribs)




Main Results


1. Expression of indole 3-acetic acid (IAA) by our modified bacteria

Salkowski Assay

Through this assay we have determined that E. coli transformed with the Auxin Xpress construct produce about 50 uM IAA. Salkowski is a colourimetric assay that detects IAA and produces an increasingly vibrant pink colour with higher concentrations of IAA in the sample.

Figure 1: Results from trial 1 of Salkowski assay with cell filtrate of IAA producing E. coli DH5α. Filtered through a 0.2 µm pore filter. (Data by Imperial College London iGEM team 2011).

Figure 2: Visual results correlating with OD measurements. The eppendorf on the right contains IAA producing E. coli DH5α and the eppendorf on the left contains control E. coli DH5α cells. (Data by Imperial College London iGEM team 2011).

LCMS

We used liquid chromatography mass spectrometry to confirm that IAA was being produced by E. coli engineered with the Auxin Xpress construct.

Figure 3: LCMS showing IAA peak in extract from E. coli engineered with the Auxin Xpress construct.


Plant response

We exposed Arabidopsis seedlings to our IAA-producing bacteria to observe their effect on the roots. For this, we used a reporter line that expresses YFP in response to indole 3-acetic acid. As controls, we used a culture of seedlings that was not incubated with any bacteria and a control that was indicated with E. coli not expressing IAA. Fluorescence was brightest in the roots incubated with IAA-producing bacteria (Video 1).


Video 1. Stack images taken by confocal microscopy converted into three-dimensional videos of Arabidopsis thaliana DR5:3VENUSroots (data and imaging by Imperial College London iGEM team 2011).


In order to quantify the expression of fluorescence in the plants exposed to different treatments we processed the images in ImageJ and analysed fluorescence intensity in individual particles. The relative fluorescence intensity of roots exposed to our IAA-secreting bacteria is 1.93x that of roots exposed to no bacteria and 2.9x that of roots exposed to non-IAA-producing bacteria. It therefore appears that bacteria normally suppress production of IAA in root tips. However, the bacteria we have engineered to express IAA produce enough of the compound to not only overcome this limitation but to also increase expression of the reporter gene.

2. Uptake of bacteria into plant roots

We observed uptake of GFP-expressing bacteria into plant roots (Figure 4). The fact that (at least some) plants can actively break up bacteria and use them for nutrients was only reported last year[1]. This finding is of extreme importance to our project as the exposure of roots to indole 3-acetic acid will vary significantly if the uptake of the compound takes place inside the roots themselves rather than from the outside. This also presents a novel platform of indirectly engineering plants as delivery of a whole range of compounds will be possible using this method.


Figure 4: Escherichia coli cells expressing superfolder GFP (sfGFP) can be seen inside an Arabidopsis thaliana root using confocal microscopy after overnight incubation of the plants with bacteria. Roots were washed in PBS prior to imaging to avoid "false positives" of bacteria adhering to the outside of the root. (Data and imaging by Imperial College London iGEM team 2011).


To ensure that the bacteria we imaged were inside the roots, we took stack images that were later converted to three-dimensional views of the roots containing bacteria (Video 2).


Video 2. Confocal stack imaging showing sfGFP-expressing bacteria inside plant roots showing blue autofluorescence (data and imaging by Imperial College London iGEM team 2011).


3. Chemotaxis of our chassis expressing PA2652 construct towards malate


Figure 5: Dependence of bacterial chemotaxis to varied malate concetrations. Cells containing PA2652 (BBa_K515102) have shown inreased number of cells in capillaries with inreasing malate concentration, with a peak at 1 mM. The number of cells drops sharply after 1 mM due to saturation. Negative control were cells without contruct. The cell count for negative control in each of the capillaries with increasing attractant concentration has not increased. Data collected by Imperial iGEM 2011.

In the Phyto-Route module of our system we have expressed the malate-reponsive chemoreceptor PA2652 in our chassis. The result of quantitative assay demonstrates chemotaxis of E. coli expressing PA2652 towards L (-) malic acid. The response towards different concentrations of malate has been quantified and the strongest response can be seen at 1 mM. These results show functionality of the Phyto-Route construct that enables movement of our bacteria towards plant root exudate malate. Once the bacteria are attracted towards roots, then they can be naturally taken up into the plant's roots.

4. E. coli survivability in soil

To assess how well our chassis Escherichia coli is able to survive in soil and for how long a plasmid can be retained, we set up an experiment that consisted of inoculating E. coli into sterile and non-sterile soil. After six weeks of incubation, samples grown up from sterile cultures still expressed fluorescence. Cultures exhibiting E. coli-like morphologies that were grown from non-sterile plates had lost fluorescence (Figure 6).

Figure 6: Colonies recovered from filter discs and grown on LB plates containing selective antibiotics imaged using a LAS-3000 gel imager. a) Sample taken from non-sterilised soil b) Sample taken from sterilised soil (Data by Imperial College London iGEM team 2011).


A restriction digest revealed that cultures from sterile and non-sterile plates that display E. coli-like morphologies have both retained the plasmid. Sequencing of the insert revealed a frameshift mutation in the coding region of the sfGFP gene in the colonies from non-sterile soil. Both samples will be sent off for 16S rRNA sequencing to identify the bacterial species. However, it seems very likely that our GM E. coli have been able to survive in soil and retain their plasmid for six weeks despite competition and selective pressure against the plasmid.

5. Tracking of bacterial metabolic activity using Dendra2

Dendra2 is a photoconvertable protein[2] that normally emits green fluorescence but can be switched to emit red fluorescence with single photon activation. This conversion from green to red is irreversible. Dendra2 is therefore very useful for observing the metabolism of cells: if all Dendra2 protein in a cell is photoconverted to emit red fluorescence and overtime begins to re-emit green fluorescence, the cell must be metabolically active.

Dendra2 is now availalbe as a BioBrick.


We used Dendra2 to assess whether the bacteria taken up by Arabidopsis roots remain metabolically active over time. The roots infected with Dendra2 expressing E. coli were imaged and photoconverted under a confocal microscope, left in cygel over night and re-imaged after 24 hours. The bacteria were shown to re-emit green fluorescence inside the root after overnight incubation, proving that they are metabolically active inside the roots.

Video 4. Photoconversion of Dendra2 in Arabidopsis thaliana roots. After 24 hours, the bacteria were re-imaged at the same settings. Expression of green Dendra2 had increased, showing that the bacteria are metabolically active inside the roots (Imaging by Mark Scott for Imperial College iGEM 2011).

6. 3D simulation of the Arabidopsis root system

We integrated the 3D simulation of generalised root system with the data fitting experiment results from wetlab to produce a MATLAB toolbox, with IAA concentration as the input and the 3D root system as the output. We defined a valid IAA concentration range from 10-3mol/L(1mM) to 10-14mol/L(0.01pM).

Figure 7: The results of the simulation with different inputs.



Video 5. This video shows how the MATLAB toolbox give the prediction of the root system after 25 days with a certain input IAA concentration.(Please select the 720HD version when you play the video to see the details clearly.)

7. IAA improving soil stability

We carried out a soil erosion experiment using Arabidopsis watered with different concentrations of IAA over 6 weeks. The results from this experiment show that less soil was washed away with water when the plants were supplemented with the optimal IAA concentration.

Video 6: This video shows how the soil erosion experiment was set up and carried out.

Figure 8: Mass of Soil eroded in different IAA concentration, control is soil supplemented with IAA but without Arabidopsis. (Data by Imperial College London iGEM team 2011).


References:

[1] Paungfoo-Lonhienne, C. et al. (2010) Turning the table: plants consume microbes as a source of nutrients. PLoS One, 5(7), e11915.

[2] Gurskaya N et al. (2006) Engineering of a monomeric green-to-red photoactivatable fluorescent protein induced by blue light. Nature Biotechnology 24: 461-465.