Team:Grenoble/Safety
From 2011.igem.org
Maxime.huet (Talk | contribs) |
Maxime.huet (Talk | contribs) |
||
Line 93: | Line 93: | ||
In general, the work in a laboratory requires the use of complex equipment or it implies performing delicate operations. The material, that could be a machine, chemicals or biological material involves the existence of risks. Risks for the goods and for people in the room, but also risks for the environment and people outside the lab. The safety rules and procedures as well as the personal and collective protective equipment are made to minimize the risks by decreasing the probability of an incident to happen. | In general, the work in a laboratory requires the use of complex equipment or it implies performing delicate operations. The material, that could be a machine, chemicals or biological material involves the existence of risks. Risks for the goods and for people in the room, but also risks for the environment and people outside the lab. The safety rules and procedures as well as the personal and collective protective equipment are made to minimize the risks by decreasing the probability of an incident to happen. | ||
</p> | </p> | ||
- | |||
- | |||
- | |||
- | |||
- | |||
</div> | </div> | ||
Line 104: | Line 99: | ||
<div class="blocbackground"> | <div class="blocbackground"> | ||
<p> | <p> | ||
- | Half of our team made an internship at the CEA Grenoble. The CEA | + | Half of our team made an internship at the CEA Grenoble. The CEA has a specific department working on safety issues. There is also a special team in charge of security and safety called FLS: Formation locale de sécurité, we may translate: Local Group of Security and Safety. They ensure the safety of the people who are working in the center and the visitors and also of the goods and the material. The members of our team who made their internship in CEA have attended a compulsory safety training organised by FLS. |
</p> | </p> | ||
<p> | <p> | ||
Line 121: | Line 116: | ||
--> | --> | ||
</div> | </div> | ||
+ | |||
+ | <!-- | ||
+ | petite phrase transition | ||
+ | --> | ||
<h3 id="instru">Instruments</h3> | <h3 id="instru">Instruments</h3> | ||
<div class="blocbackground"> | <div class="blocbackground"> | ||
<p> | <p> | ||
- | + | During our experiments, we only performed commonly used protocols and instrumentation for microbiology and common laboratory strains of | |
+ | E.Coli. | ||
+ | <!-- | ||
+ | italique | ||
+ | --> | ||
+ | We have used basic devices that we find in every molecular biological laboratory: | ||
<dl> | <dl> | ||
<dt>Ultra violet lamp: </dt> | <dt>Ultra violet lamp: </dt> | ||
<dd> | <dd> | ||
- | There is a risk for the eyes and | + | There is a risk for the eyes and the skin, but the UV lamp is only used to take a picture of our gel after electrophoresis, so we are never directly exposed because there is a protective cover and we wear a mask that shields from UV. |
</dd> | </dd> | ||
<dt>Centrifuge:</dt> | <dt>Centrifuge:</dt> | ||
<dd> | <dd> | ||
- | The | + | The centrifuges have to be perfectly balanced. All the centrifuges in our lab have detectors that warn the operator in case of imbalance. |
</dd> | </dd> | ||
<dt>Autoclave:</dt> | <dt>Autoclave:</dt> | ||
<dd> | <dd> | ||
- | The operation of the autoclave require a specific training | + | The operation of the autoclave require a specific training and has only be performed by trained people. |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
</dd> | </dd> | ||
</dl> | </dl> | ||
Line 148: | Line 148: | ||
<h3 id="chemical">Chemical risk-assessment</h3> | <h3 id="chemical">Chemical risk-assessment</h3> | ||
- | <div class="blocbackground"> | + | <div class="blocbackground"> |
<p> | <p> | ||
- | + | A toxic chemical, the EtBr (ethidium bromide) is commonly used to stain DNA. We do not use EtBr solution while making our gel but we dip the gel in an EtBr bath after the electrophoresis. Due to the hazardous nature of this product, a hood is specially dedicated to its usage. The EtBr and all material that got in contact with it is stored in a special trash in the hood. | |
- | </p> | + | </p> |
<p> | <p> | ||
- | We | + | We design a biosensor to measure a pollutant (like heavy metals) concentration in water. We are actually working on two versions of this biosensor. One of them involves the use of the MerR sensor for mercury, and the second alternative one, TetR for tetracycline. We therefore need to use mercury to test this system. This raises questions about safety for the researcher but also for the public and the environment. The teracycline is a safer alternative to test our system. |
</p> | </p> | ||
<p> | <p> | ||
- | + | For the tests we will have to use mercury in a water solution. It is the ionic form Hg2+ that will be used. The mercury is very toxic and mutagenic. To limit the risks in terms of probability of incident and in terms of hazards, we will use a stock solution. We will only have to dilute it to the wanted concentrations. Moreover a chemical hood will be dedicated to the preparation of these solutions and for the test of our system. A specific trash will also be dedicated to store all the wastes in contact with mercury. | |
</p> | </p> | ||
- | |||
<p> | <p> | ||
- | Concerning | + | Concerning the toxic waste management, a firm specialized in the processing of hazardous wastes recovers the barrels of toxic chemicals. A tracking sheet is associated to each toxic barrel. The lab receive then a document that certifies the appropriate waste treatment. |
</p> | </p> | ||
- | |||
- | |||
- | |||
- | |||
- | |||
</div> | </div> | ||
Line 347: | Line 341: | ||
</p> | </p> | ||
</div> | </div> | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
</div> | </div> | ||
</div> | </div> |
Revision as of 15:57, 2 September 2011
Safety
Lab work safety
In general, the work in a laboratory requires the use of complex equipment or it implies performing delicate operations. The material, that could be a machine, chemicals or biological material involves the existence of risks. Risks for the goods and for people in the room, but also risks for the environment and people outside the lab. The safety rules and procedures as well as the personal and collective protective equipment are made to minimize the risks by decreasing the probability of an incident to happen.
General considerations
Half of our team made an internship at the CEA Grenoble. The CEA has a specific department working on safety issues. There is also a special team in charge of security and safety called FLS: Formation locale de sécurité, we may translate: Local Group of Security and Safety. They ensure the safety of the people who are working in the center and the visitors and also of the goods and the material. The members of our team who made their internship in CEA have attended a compulsory safety training organised by FLS.
The whole team is now working together in another lab, the CIME (centre inter-universitaire de microélectronique), next to the CEA labs and the Phelma school buildings. All team members have met the safety engineer of the labs where we conduct the experiments. He explained us the safety rules to be followed.
At CEA some researchers work on microsystems to detect and quantify pollutants like heavy metals. They shared their experience and knowledge with us about the way to conduct safe experiments with very toxic chemicals like mercury.
Instruments
During our experiments, we only performed commonly used protocols and instrumentation for microbiology and common laboratory strains of E.Coli. We have used basic devices that we find in every molecular biological laboratory:
- Ultra violet lamp:
- There is a risk for the eyes and the skin, but the UV lamp is only used to take a picture of our gel after electrophoresis, so we are never directly exposed because there is a protective cover and we wear a mask that shields from UV.
- Centrifuge:
- The centrifuges have to be perfectly balanced. All the centrifuges in our lab have detectors that warn the operator in case of imbalance.
- Autoclave:
- The operation of the autoclave require a specific training and has only be performed by trained people.
Chemical risk-assessment
A toxic chemical, the EtBr (ethidium bromide) is commonly used to stain DNA. We do not use EtBr solution while making our gel but we dip the gel in an EtBr bath after the electrophoresis. Due to the hazardous nature of this product, a hood is specially dedicated to its usage. The EtBr and all material that got in contact with it is stored in a special trash in the hood.
We design a biosensor to measure a pollutant (like heavy metals) concentration in water. We are actually working on two versions of this biosensor. One of them involves the use of the MerR sensor for mercury, and the second alternative one, TetR for tetracycline. We therefore need to use mercury to test this system. This raises questions about safety for the researcher but also for the public and the environment. The teracycline is a safer alternative to test our system.
For the tests we will have to use mercury in a water solution. It is the ionic form Hg2+ that will be used. The mercury is very toxic and mutagenic. To limit the risks in terms of probability of incident and in terms of hazards, we will use a stock solution. We will only have to dilute it to the wanted concentrations. Moreover a chemical hood will be dedicated to the preparation of these solutions and for the test of our system. A specific trash will also be dedicated to store all the wastes in contact with mercury.
Concerning the toxic waste management, a firm specialized in the processing of hazardous wastes recovers the barrels of toxic chemicals. A tracking sheet is associated to each toxic barrel. The lab receive then a document that certifies the appropriate waste treatment.
Biological risks, biosafety rules.
However we performed usual operations of biology and chemistry for which the risks are well known nowadays, our experiments aim to genetically modify a living organisms. And this aspects of the project safety issue is the most important in terms of information sought because it is the less known. Here we are dealing with probability, scenario that may happened and where consequences are mostly uncertain.
In our bio-safety analysis, we try to take into consideration :
- The risk of the chassis bacteria
- The one of each biobrick as well as their combinations in the whole device
- The robustness of the whole device
Microorganisms chassis.
We work with a strain of E.Coli designed for lab work : BW25113. This strain is commonly used by students and researchers. .It has no virulence gene, and is therefore a riskless chassis. Furthermore, it has got several genetic modifications that would limit its development if ever it was to make it out of the lab. Those modifications are :
- An inactivated lacZ, ara and rha genes : the bacteria can use neither the lactose, arabinose or the rhamnose as a source of energy.
- A deletion into a gene coding for an enzyme (pyr E) involved fabrication Thymine and Cytosine nucleotides synthesis (which doesn't make the strain auxotroph for theses base though).
These mutations are quite a disadvantage and limit the development of this strain on a minimal media. The main security is still the national lab biohazard policy: after each experiment, biological waste are collected on a special bin and autoclaved before leaving the lab.
Biobricks parts used.
The genetic device we develop is a toggle switch which includes two quorum sensing biobricks : cin I and cinR genes. We also use a reporter gene coding for a pigment as an output. At first, we planned to include a post transcriptional regulation mechanism extracted from Pseudomonas aeruginosa. We present here some detail about the toggle and each of those bricks. We found out that the rsma mechanism we develop is the one that needs the most to be analysed. We therefore focused on the later and tried to rationalised the risk that would cause a catastrophic situation. In order to illustrate a series of event, we made an event tree analysis.
Toggle switch
Bio-safety is not only about the nature of the basic parts, but also about their combinations. It is necessary to think whether a device might give a dangerous property to any cell. The toggle switch mechanism is a “man-made” specific organisation of inoffensive genetic sequences. It has no hazard on itself but activates the transcription of downstream genes : cinI or cinR. Without any pollutants, only cinR should be transcribed. So they would not be any diffusion of AHL outside of the cell.
Quorum sensing
An other system used in our device can modify expression of numerous genes : the CinI quorum sensing. The later is shared by many species of legume-nodulating rhizobia (1), a genus of soil bacteria that fix nitrogen. The cin quorum sensing molecule regulates growth inhibition, expression of nodulation gene, but no harmful response has been noticed so far. It is quite a Rhizobium-specific communication system. These bacteria colonise plant cells within root nodules and have never shown any pathogenicity towards humans and their environment.
The red pigment
We use a combination of three genes that codes for lycopen. This pigment is naturally found in many species of bacterium and has no toxicity.
The rsma regulation system
The Rsma translational regulation system we extracted is from an opportunistic bacteria called Pseudomonas aeruginosa (2). It is very similar to many others, mostly known as “Csra” that can be found on many eubacteria (3). The Rsma and csra systems both control a large variety of physiological processes such as central carbon metabolism, motility, biofilm formation, virulence, pathogenesis (4) and many more (5)...
Basically, when CsrA or RsmA proteins are expressed, they bind to some mRNA leader sequences and act as translational repressors by inducing their degradation. Alternatively, when a small RNA molecule is expressed (called rsmy in the Pseudomonas system) it titres and sequesters the protein, allowing the expression of targeted genes (5). In most systems, the binding site on the RNA leader sequence is a stem-loop containing repeats of GGA nucleotides (4).
In Pseudomonas, the protein RsmA negatively regulates the type VI secretion system, which has been implicated in the P. aeruginosa chronic infections (5). In some specific environment conditions, rsmY/rsmZ will be transcribed, which produces some proteins that constitute a syringe base plate (4). The later is then used to inject some proteins into a target cell.
Analyze of a catastrophic scenario
Being originally implied in the activation of some virulence genes, this mechanism implies some safety issues. For instance, the RsmA system could somehow interfere with the CsrA system of E. coli, which is highly similar.
- So what would happen if our strain was to make it out of the lab ?
- Could our genetic device activate some gene in a wild type E.coli strains, or in any other bacteria ?
- Would it, then, become harmful to human or any other organism in the environment ?
As we said above, we want to share the rsma mechanism to the foundation. We therefore though about what could be the most catastrophic situations by using it. The two worse situations we could imagine with an organism containing this brick are:
- an over development of bacteria in any specific environment
- a health threat to human or any other organism
Then we tried to think about what would be the series of event to cause such a disaster. For each of them we tried to think of how probable it is to occur, and made a comment from what we known about.
In order to illustrate our vision of the risk, we made an event tree analysis composed of three colours, each of them symbolise what we think to be a different probability to occur.
![Event Tree, bacteria are out of the lab ! What would happen ? Event tree, bacteria out of the lab](https://static.igem.org/mediawiki/2011/a/a8/Event_tree.png)
On this first table we tried to think about how could the brick containing an rsma system component become harmful to any organism.
Robustness of the device
Bio-safety is about the safety of the people, the environment, and the system itself. We therefore have to care about how the device would behave if some of the components stop working properly. Any sequence of DNA can get some mutations that would modify its characteristics, or just don't work as planned.
In our project, we can divide the system into four components:
- the toggle switch
- the communication system base on quorum sensing genes
- the output signal
- the translational regulation system based on rsma
Modelisators of our group tried to test different situations. Here is are a few examples of some unwanted behaviour of sub-devices and the consequences we expect.
In our project, we can divide the system into four components:
- if the degradation tag downstream tet R or lacI doesn't work, the toggle switch would still be able to toggle but it would take up to day.
- If the cinI promotor leaks or is not sensitive enough to AHL, the output signal will be hard to distinguish
- If the post-transcriptional system doesn't work, the toggle would be less sensitive but still working
We could deduce from this last simulation that the rsma system we develop is not necessary to our device. Given that it is a global regulation system, and that it might interfere with cinI, we decided not to incorporate into our genetic network yet.
References
OPTIONAL QUESTION:
Do you have other ideas on how to deal with safety or security issues that could be useful for future iGEM competitions? How could parts, devices and systems be made even safer through biosafety engineering?Manipulation of living organism allows producing artificial form of life and metabolism. These modifications, although well controlled, require application of the precautionary principle. Even if in our project we do not plan to take our work out of the lab, engineered bacteria might be accidentally or on purpose released in the environment.
In our project, and we think it is the case of many other, the major problem we want to avoid would be that bacteria go out of the lab. In such a case, efficient methods can be used to limit or prevent their development. Synthetic biology project should employed living organisms mutated to become enable to survive outside the lab. For exmple bacteria that must use amino acids which do not exists in the nature. It is also possible to force the microorganisms to use rare carbon sources. An other possibility is the use of a suicide gene repress by an artificial molecule that can not be found out of a laboratory. Another ways is to make bacteria weak face to the micro-organisms natural selection.
To increase the safety of iGEM competition, we think about bacteria which have an inducible essential gene for binary division by a chemical not existing or rare in nature, by this way the bacteria can’t be divide itself so it will be not selected and going to disappear nearly.
A team of researcher from CEA (IG/Genoscope – Évry), Institut für Biologie (Freie Universität, Berlin), CNRS, University of Evry, Katholieke Universiteit (Leuven) and Heurisko company (USA) worked on Chemical evolution of a bacterial genome.
They used