Team:Tokyo Tech/Projects/RPS-game/index.htm
From 2011.igem.org
Line 524: | Line 524: | ||
For the in vivo assay, we prepared a competent cell JM2.300 into which Pbad/araC-Cre(pSB1A2, BBa_I718008) had been constructed. Subsequently, our BioBrick was constructed into the cell. The strain was grown in a 3ml liquid culture, and 75μl of 2M arabinose was added to induce Cre expression. For the control experiments we used the same strain without arabinose induction and a JM2.300 strain which was induced with arabinose and had only our BioBrick. All the strains were cultured each for periods of 0.5, 1, 2, and 4 hours, and in each case the florescence levels were measured by flow cytometer and FLC. | For the in vivo assay, we prepared a competent cell JM2.300 into which Pbad/araC-Cre(pSB1A2, BBa_I718008) had been constructed. Subsequently, our BioBrick was constructed into the cell. The strain was grown in a 3ml liquid culture, and 75μl of 2M arabinose was added to induce Cre expression. For the control experiments we used the same strain without arabinose induction and a JM2.300 strain which was induced with arabinose and had only our BioBrick. All the strains were cultured each for periods of 0.5, 1, 2, and 4 hours, and in each case the florescence levels were measured by flow cytometer and FLC. | ||
</p> | </p> | ||
+ | |||
+ | <table border="1"> | ||
+ | <tr> | ||
+ | <th></th> | ||
+ | <th>Sample 1</th> | ||
+ | <th>Sample 2</th> | ||
+ | <th>Sample 3</th> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Pbad/araC-Cre</td> | ||
+ | <td>-</td> | ||
+ | <td>+</td> | ||
+ | <td>+</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>arabinose</td> | ||
+ | <td>+</td> | ||
+ | <td>+</td> | ||
+ | <td>-</td> | ||
+ | </tr> | ||
+ | </table> | ||
+ | |||
+ | |||
<p> | <p> | ||
We measured the fluorescence levels of two different constructions to prove that recombination only occurs in presence of Cre recombinase. On the sample with the Pbad/araC-Cre construction, we found that recombination occurred when arabinose was added. We could also observe recombination occurred when arabinose was not added, which can be explained due to a leaking in the Pbad/araC promoter. Opposite to this result, when we measured the levels of the sample without the Pbad/araC-Cre construction, we found that the GFP levels were far lower than those of the sample with the Pbad/araC-Cre construction. This clearly proves that our lox constructions, both in BBa_K649201 and BBa_K649202, respond correctly to the effects of Cre recombinase. | We measured the fluorescence levels of two different constructions to prove that recombination only occurs in presence of Cre recombinase. On the sample with the Pbad/araC-Cre construction, we found that recombination occurred when arabinose was added. We could also observe recombination occurred when arabinose was not added, which can be explained due to a leaking in the Pbad/araC promoter. Opposite to this result, when we measured the levels of the sample without the Pbad/araC-Cre construction, we found that the GFP levels were far lower than those of the sample with the Pbad/araC-Cre construction. This clearly proves that our lox constructions, both in BBa_K649201 and BBa_K649202, respond correctly to the effects of Cre recombinase. |
Revision as of 05:15, 4 October 2011
![Tokyo Tech 2011](https://static.igem.org/mediawiki/2011/2/24/TokyoTech_TOPlogo.png)
Rock-Paper-Scissors game
1. The Hands
The first step towards making an RPS game that can be played between humans and bacteria is giving each player a set of signaling molecules through which they can communicate their choice of rock, paper or scissors. For that purpose we created two sets of three signaling molecules corresponding each to rock, paper or scissors. For humans we used IPTG, aTc and salicylate, respectively. For E. coli we used 3OC6-HSL, 3OC12-HSL and AI-2, respectively.
![](https://static.igem.org/mediawiki/2011/4/4b/Image001.png)
2. The Judge
Although we defined a set of six signaling molecules that can be used to play the RPS game, we still need to find a way to know who wins the game. To know who the winner of each game is, we designed a set of E. coli that act as judges. Each Judge E. coli has an AND-gate promoter and a fluorescent protein gene that is expressed when the AND-gate promoter is activated. In this way, the Judge E. coli can let us know its decision by producing GFP, RFP or CFP to indicate whether humans win, lose or it is a tie, respectively.
![](https://static.igem.org/mediawiki/2011/0/09/Tt-image020.png)
2.1 Using AND-Gate promoters to create Judges
The first step to make the Judge E. coli was to find a logic device which could allow the Judge to decide who the winner of the RPS game was. We found that the AND-gate promoters would fit perfectly for that purpose, since they can take two signaling molecules as inputs and produce one indicator as output. Since each of the players has a set of three different signaling molecules, we need a set of nine Judges, each of which has an AND-gate promoter that is activated only by one of the nine possible pairs of signaling molecules. These combinations are shown in the image below.
![](https://static.igem.org/mediawiki/2011/3/36/Tt-image021.png)
Our next mission was then to check if there were AND-gate promoters BioBricks that we could use. We searched in the Registry and found a potential AND-gate promoter designed by iGEM 2007’s team Tokyo Alliance. This potential AND-gate promoter is designed to be activated by the addition of both IPTG and 3O-C6-HSL. However, there was no data showing the IPTG dependency of this promoter, so we did experiments and confirmed this dependency for the first time in iGEM. We concluded that the addition of both IPTG and 3O-C6-HSL regulates the activity of this AND-gate promoter. In this way, we completed the construction of one of the Judges E. coli, which proves in principle that our game is feasible.
![](https://static.igem.org/mediawiki/2011/1/18/Tt-image024.png)
Tokyo Alliance AND-gate promoter
This Plux-lac hybrid promoter contains two LacI operators, a LuxR operator and luxR. We introduced this part into LacI expressing E. coli strain. Because IPTG controls the binding of LacI to two LacI-operator parts and 3OC6-HSL controls the binding of LuxR to a LuxR-operator part, the gfp gene activity of the reporter part is dually regulated by IPTG and 3OC6-HSL. We used promoterless pSB3K3-GFP (BBa_J54103) as a negative control, and pAC-Pλ-gfp (chloramphenicol-resistance), which constitutively expressed GFP, as a positive control. To know about the mechanism of this promoter click here.
2.2 Creating Parts that responded correctly to our set of Signaling Molecules
In the process of constructing enough AND-gates that could suffice the needs of our RPS game design, we discovered two faulty BioBricks: PlsrA (BBa_K117002) and PlasI (BBa_J64010). Because of these faulty parts, the Judge E. coli set we had designed could only sense the Player E. coli’s signaling molecule 3OC6-HSL (Rock). This ultimately led to an unfair game because humans could win every time they played with the Paper signaling molecule (for more on the “Sad story of the Rock Player” click here).
To fix this problem, we improved the old defective lasI and lsrA promoters parts by making new parts that work! As can be seen in the experimental information below (see “Improving PlsrA” and “Improving PlasI”), we confirmed our PlasI (BBa_K649000) and PlsrA (BBa_K649100) work perfectly!
Since the lsrA promoter plays a key role in the correct functioning of AI-2, fixing these parts now allows us to use AI-2 as a signaling molecule, which is a promising advance because of the characteristics of the AI-2 mechanism. This mechanism prevents AI-2 from cross-talking with other signaling molecules such as AHL. Hence, this signaling molecule is a very powerful tool to build complex Synthetic Biology systems.
Finally, one thing we would like outline is that although the promoters we made are single input promoters, confirmation of their activity is required as a reference to construct AND gate promoters. Therefore, we solved important issues and made significant advances towards constructing AND-gate promoters. This allows E. coli to also chose the signaling molecules corresponding to Paper and Scissors, so we have again a working RPS game design.
2.3 Improving PlsrA
![](https://static.igem.org/mediawiki/2011/0/05/Image025.png)
![](https://static.igem.org/mediawiki/2011/2/2c/Tt-image026.png)
LEFT: Not working PlsrA (BBa_K117002) RIGT: Working PlsrA (BBa_K649100)
We confirmed that the lsrA promoter BBa_K117002 does not work properly (samples used our experiments are listed in Table 1 below). We measured transcriptional activity of lsrA promoter by introducing a gfp gene downstream of this promoter (Fig.1).The intensity level of GFP fluorescence of BBa_1K17002 were lower even than those of the negative control (Fig.2), which clearly shows that lsrA promoter(BBa_K117002) does not work as expected.
To solve this problem, we created the first working iGEM lsrA promoter (BBa_K649100). This promoter can be repressed by our new LsrR part (BBa_K649107). We measured the transcriptional activity of our lsrA promoter by introducing a gfp gene downstream of the promoter. Its fluorescence intensity was much higher than that from a promoter-less GFP negative control plasmid, showing that our new lsrA promoter works. The parts we constructed can be found below.
![](https://static.igem.org/mediawiki/2011/c/ca/Tt-image029.png)
![](https://static.igem.org/mediawiki/2011/5/5f/Tt-image031.png)
2.4 Improving PlasI
![](https://static.igem.org/mediawiki/2011/9/9f/Image034.png)
![](https://static.igem.org/mediawiki/2011/f/f5/Image036.png)
LEFT: Not working lasI promoter (BBa_J64010). RIGHT: New working lasI promoter (BBa_K649000) we made. We confirmed it works as expected. In our assay, we used the same LsrR regulator part used in the assay of BBa_ J64010. Clearly, for our part the fluorescence intensity of 3OC12-HSL+ was higher than that of 3OC12-HSL-.
To prove that the problem resided in the PlasI part and not in the LasR part, we did another assay with a well characterized LasR part that we received and that is known to work well. Details about this assay can be found here
The constructions we made to test our promoter can be found below.
![](https://static.igem.org/mediawiki/2011/4/4e/Image037.jpg)
![](https://static.igem.org/mediawiki/2011/3/32/Image040.jpg)
3. The Randomizers
Although our set of six signaling molecules allows us to play RPS with E. coli, we must make sure E. coli can chose any of its three signaling molecules with the same probability in order to be able to play RPS fairly and properly. To do so, we designed three kinds of randomizers: one kind which needs of three types of bacteria (each of which produces one of the three RPS signaling molecules), and the other kind that needs of only one type of bacteria which can synthetize each of the three signaling molecules one at a time and randomly. Namely, the randomizers are Single Colony Isolation, Survival of the Fittest and Conditional Knockout by Recombination.
3.1 Single Colony Isolation
This is our simplest randomizer design. To make sure E. coli choses any of its signaling molecules with equal probability, we put the constructs for each molecule inside a different bacterium, so we create three types of bacteria: one synthetizing the corresponding signaling molecule for rock, other synthetizing the corresponding signaling molecule for paper, and lastly one synthetizing the corresponding signaling molecule for scissors. By randomly isolating a single colony out of the many colonies that result from the mixing between the three types of E. coli, we get a random output as E. coli’s choice for the RPS game.
3.2 Conditional Knockout by Recombination
![](https://static.igem.org/mediawiki/2011/thumb/8/8b/Image136.png/742px-Image136.png)
Our third randomizer differs from our other two randomizers in that all the three signaling molecules are produced one at a time and randomly by only one type of bacteria. We were inspired by a paper about “brainbow” research on mice to create this randomizer (Livet J et. al, 2007), which is based on the recombination mechanism of the enzyme Cre and the lox sequences. We designed a Cre-Lox system which allows E. coli to express one of its three signaling molecules by means of conditional knockout. The design is depicted in Figure 1. It should be noted this randomizer is designed to be used at a single-cell level, for example using microfluidic devices. When this randomizer is used in groups of cells the different signals released by the cells will mix. In this case, a single colony of bacteria can be isolated and in this way obtain only one of the signaling molecules produced by the initial group of cells.
![](https://static.igem.org/mediawiki/2011/e/e9/Image138.png)
3.2.1 The Requirements
Basically, each pair of lox sites (indicated by the same color) mark the points which the enzyme Cre will excise (they will be cut off the backbone along with the sequence between them). For a design that allows choosing randomly one of E. coli’s three signaling molecules, at least two cassettes of lox sites are needed. When these two cassettes of lox sites and protein coding sequences are arranged as in Figure 1(b), only one signaling molecule is produced.
Our design also required a way to control LuxI gene’s expression. To do so, we used an inducible promoter instead of a constitutive promoter. A constitutive promoter would have caused LuxI gene to be expressed beforehand and could lead to an E.coli producing two signaling molecules at the same time (the equivalent of showing two hands in the RPS game). In contrast, the inducible promoter prevents a particular gene from expressing preferentially.
One last but not less important requirement for our randomizer is that it should express each of the three signals not only one at a time, but also with the same probability. This makes the game fair in the sense that E. coli’s choice in the RPS game is not predictable.
3.2.2 The Mechanism
When the blue cassette of Lox sites is excised (Fig 1), the signaling molecule coded by LasI (3OC6-HSL) will be produced. Likewise, when the black Lox cassette is excised, the signaling molecule coded by LuxS (AI-2) will be produced. On the other hand, a third possible outcome is that recombination does not take place. In this case, the signaling molecule coded by LuxI (3OC6-HSL) will be produced. Also note that excision of one kind of lox cassette removes the remaining cassette, thereby preventing further recombination.
As mentioned before, one of the requirements for our randomizer was to have at least two lox cassettes. This prevents excision of lox sites from different cassettes (for example one blue lox site and one black lix site). We confirmed, for the first time in iGEM, that the lox71-lox66 cassette and the lox2272-lox2272 cassette are incompatible (Zorana Carter and Daniela Delneri et al, Yeast 2010), and therefore can be used to build our randomizer.
3.2.3 Testing the Lox Cassettes
We tested if our Lox Cassettes constructions were working properly. We constructed three kinds of BioBricks: two of them are expected to express GFP when the lox sites are excised and RFP when they are not.
PlacIQ-lox2272-gfp-lox2272(BBa_640200)
PlacIQ-lox2272-rfp-lox2272-gfp (BBa_640201)
PlacIQ-lox71-rfp-lox66-gfp (BBa_640202),
By comparing levels of GFP fluorescence and RFP fluorescence we could determine the relative recombination frequency of BBa_640201 and BBa_640202 (the recombination frequency levels when compared to one another). For these three BioBricks, in vivo and in vitro assays were made.
The in vitro assay of BBa_640200 allowed us to confirm that the Cre-mediated recombination on lox2272 cassette works as designed. In the assay, the part was made linear using restriction enzymes. Cre recombinase (1,000 units/ml, 1μl) was added to the linear DNA (50ng/μl, 4 μl) and incubated for 0.5, 2, and 4 hours. Images of the experiments have been added below.
These images of the electrophoresis experiments show that there are several bands in samples to which Cre was added, which indicates that excision of the lox sites successfully occurred.
For the in vivo assay, we prepared a competent cell JM2.300 into which Pbad/araC-Cre(pSB1A2, BBa_I718008) had been constructed. Subsequently, our BioBrick was constructed into the cell. The strain was grown in a 3ml liquid culture, and 75μl of 2M arabinose was added to induce Cre expression. For the control experiments we used the same strain without arabinose induction and a JM2.300 strain which was induced with arabinose and had only our BioBrick. All the strains were cultured each for periods of 0.5, 1, 2, and 4 hours, and in each case the florescence levels were measured by flow cytometer and FLC.
Sample 1 | Sample 2 | Sample 3 | |
---|---|---|---|
Pbad/araC-Cre | - | + | + |
arabinose | + | + | - |
We measured the fluorescence levels of two different constructions to prove that recombination only occurs in presence of Cre recombinase. On the sample with the Pbad/araC-Cre construction, we found that recombination occurred when arabinose was added. We could also observe recombination occurred when arabinose was not added, which can be explained due to a leaking in the Pbad/araC promoter. Opposite to this result, when we measured the levels of the sample without the Pbad/araC-Cre construction, we found that the GFP levels were far lower than those of the sample with the Pbad/araC-Cre construction. This clearly proves that our lox constructions, both in BBa_K649201 and BBa_K649202, respond correctly to the effects of Cre recombinase.
We also confirmed our results optically by taking florescence photographs. Whole samples were plated and incubated in 37℃ for 10 hours. Photographs of three samples of BBa_K649201 were taken at t = 0.5 hours using red florescence filter, green florescence filter and no filter as shown below, respectively.
![](https://static.igem.org/mediawiki/2011/thumb/2/27/Image142.png/800px-Image142.png)
![](https://static.igem.org/mediawiki/2011/thumb/7/76/Image144.png/800px-Image144.png)
![](https://static.igem.org/mediawiki/2011/1/1e/Image146.png)
Figure 1.(a) red florescence of three samples detected (b) green florescence detected (c) composed version of (a)and(b) The leftmost sample corresponds to the sample without the Pbad/araC-Cre, while the middle and rightmost sample correspond to the sample with the (Pbad/araC-Cre, arabinose(+)) and (Pbad/araC-Cre, arabinose(-)) construction. It can be seen from the pictures that the leftmost sample does not express GFP, which confirms our previous results that recombination only occurs in the presence of Cre recombinase.
![](https://static.igem.org/mediawiki/2011/thumb/d/de/Image147.png/800px-Image147.png)
Photograps of six samples of BBa_K649202 (up) and BBa_K649201 (down) were also taken at t =0.5 hours. We confirmed the previous results of the flow cytometer measurements by observing that the arabinose (+) sample of BBa_K649202 was brighter than that of BBa_K649201. This result was true for all periods of time during the measurement (Figure#a through d), which suggests that recombination frequency of lox71/66 is higher than that of lox2272 cassette.
3.2.4 Playing Fair: Future Work
To make each of the outcomes (R, P, and S) equally probable, we are going to examine the recombination frequency of each lox cassette. This will be likely to allow us to have an RPS player E. coli whose choice of either of rock, paper or scissors cannot be predicted.
![](https://static.igem.org/mediawiki/2011/9/96/Image150.jpg)
In our next experiments, we are going to vary the reaction time and the distance between the lox sites of each cassette. We believe precise modification of this two parameters must lead to our goal of making a randomizer in which each of the signaling molecules can be expressed with the same frequency (which results in each of the outcomes being expressed with the same probability).
3.3 Survival of one strain
3.3.1 Introduction: Minimal differences determine who will survive
In this section we will show a shocking scenario of evolution: the future of each of three different rival strains (whether the strain will die or survive) is marked by minimal differences between the initial population densities of the strains. Furthermore, we will also show that we can apply this very interesting result to create a randomizer that can be used in our Rock-Paper-Scissors game, due to the fact that only one of the rival strains will survive. More specifically, we assign to each of the three rival strains either of Rock, Paper or Scissors, make them compete for survival and take the surviving strain to represent the bacteria’s choice for the RPS game.
3.3.2 Adjusting the Model to create a True Randomizer
The idea for creating this randomizer was born from a paper written in 1996 by Durret and Levin. In it, the authors described a system of three types of bacteria that competed for survival in dynamic that resembled a Rock-Paper-Scissors (RPS) game. However, the model proposed in this paper is not fully appropriate for our RPS randomizer, since one of the three types of bacteria cannot ultimately survive (although it can dominate the system, i.e. have the highest population density, for definite periods of time). We will discuss more on the limitations we found in this model to be adopted as a randomizer and the modifications we made to create a true randomizer.
3.3.3 How the Three Types of Bacteria Compete for Survival
The three types of bacteria that compete for survival use three tactics to outcompete their rivals: the production of a toxin (a bacteriocin called colicin) that is toxic to other strains, resistance to the toxin produced by other strains, and a higher birth rate than their rival strains. Namely, the three types of bacteria are: colicin-producing E. coli (R), colicin-resistant E. coli (P) and colicin-sensitive E. coli (S). The colicin-producer outcompetes the colicin-sensitive by producing the colicin. The colicin-sensitive bacteria outcompetes the colicin-resistant because its birth rate is higher than that of the colicin-resistant. The colicin-resistant outcompetes the colicin producer because it’ birth rate is higher than that of the colicin producer. The colicin resistant bacteria are also able to produce colicin, but at a lower energetic cost, which allows them to have a higher birth rate.
The system was described by the following general differential equations
Where
3.3.4 The Old Model
In the model described by Durret and Levin’s paper the equations were as follows:
These equations show that the colicin-resistant bacteria are completely immune to colicin (there is not death factor associated to colicin in the equation for du2/dt). However, as will be explained afterwards, this results in a loss of balance that does not allow building a true randomizing system.
Now, setting the parameters as follows, the graph below was created by Durret and Levin.
Note that these parameters satisfy the following relations:
As mentioned before, in this model there is no case where the colicin-producer can survive for infinitively long periods of time (this is true whenever the colicin-resistant’s initial concentration is greater than zero). This fact can be seen in the graph drawn by Durret and Levin, where the lines along the axis for (in the rightmost lower corner) always converge either to or . We highlighted this fact by circling the point in the graph below.
3.3.5 Our New Model
As mentioned before, the model proposed by Durret and Levin has critical limitations as a randomizer for the RPS game. To be able to create a true randomizer, we modified the differential equations of the model taking care to give it a biological meaning. With our new differential equations, any of the three types of bacteria can ultimately survive by outcompeting the other two strains, which will die. More specifically, we limited the resistance of the colicin-resistant bacteria in the sense that it would produce a type of bacteriocin that is only toxic to itself and to the sensitive strain, and additionally the resistant strain would also be vulnerable to the colicin produced by the colicin-producer. Since which strain will be the one that survives is determined by very small differences in the initial concentrations of the three different populations of bacteria, in practice this systems becomes a randomizer because of the imprecisions in the measurements that result, for example, when using micropipettes. This randomizer describes a new competition dynamic that could not be reproduced in the previous model proposed by Durret and Levin due to the instability along the axis.