Revision as of 20:40, 27 September 2011 by Hargem (Talk | contribs)

Diesel Production: Background

Petroleum, an Unfortunate Necessity

Petroleum may be a necessity for modern civilization, but current extraction methods are unsustainable and non-cyclical in the long run.

Modern society is completely dependent on petroleum based fuels. Automobiles are slowly transitioning towards electric power. However, for the foreseeable future, batteries will not be able to hold the energy needed for applications that require long range (e.g. jet planes, maritime shipping, and long range trucking) or high horsepower (e.g. agriculture, construction, industry). Without the use of petroleum, society as we know it would crumble. Petroleum is not a viable long term fuel due because it a non-renewable resource. When petroleum based fuels are combusted, CO2 is released into the atmosphere. Using current technology, it is impossible to turn this carbon dioxide back into fuel, meaning that the amount of petroleum based fuel is a finite commodity. In addition, this excess carbon dioxide is a potent greenhouse gas that contributes to global warming.

Todays biofuels are renewable, but do not work as "drop-in" replacements

Since carbon in biofuels can come from cellular respiration, biofuels may be carbon neutral. However, current biofuels have clear and problematic limits concerning energy production.

Many different attempts have been made to produce a renewable, biologically derived fuel that would alleviate both the limited supply and emissions issues presented by petroleum based fuels. These efforts include alcohols (ethanol, butanol and other, higher alcohols), and biodiesel . Like petroleum based fuels, biofuels consist of combustible molecules that emit carbon dioxide. However, unlike petroleum based fuels, biofuels are renewable. CO2 can be converted into more biofuel by feeding biofuel producing microbes (bacteria, yeast) photosynthetically derived plant biomass. Since the amount of CO2 produced by burning a biofuel cannot exceed the CO2 incorporated into plant biomass, a biofuel can be used indefinitely without any net carbon emissions. However, current biofuels consist of drastically different compounds from those found in petroleum. Petroleum consists of mostly long-chain length alkanes consisting of long hydrocarbon chains. Current biofuels contain either alcohols or long chain esters (biodiesel). Both of these molecules contain oxygen, which dramatically changes chemical properties. Both alcohols and biodiesel are more corrosive than unreactive alkanes. Alcohols are highly corrosive, both in pipelines ( [1] ), and in engines not designed for the use of alcohols, even at concentrations as low as 20%( [2] ). The corrosive property of alcohols in pipelines means that ethanol (the main alcohol in widespread use) is transported in vehicles (mostly by train), as opposed to by cheaper and less energy intensive pipelines( [1] ). Transport of alcohols by pipeline would require retrofitting the entire fuel distribution infrastructure. The Esters in biodiesel are not directly as corrosive as alcohols, but can be biodegraded by anaerobic bacteria, producing hydrogen sulfide and other acids( [3] ). Biodiesel has a higher freezing point than diesel, causing engine fuel filer clogging at low temperatures( [4] ). Ethanol suffers from a much lower energy density than diesel(21.27-23.56 MJ/L vs 32.36-34.66 MJ/L)( [5] ), resulting in lower gas mileage. The table below shows selected chemical properties of diesel, as well as the common biofuels ethanol, butanol, and biodiesel( data from [5,6,] and ).

Property Diesel Ethanol Biodiesel n-Butanol
Specific gravity @ 15.5°C0.850.7940.88.81(@20°C)
Density @ 15.5°C(g/L)848.25792.05878.09808.8(@20°C)
Energy Density(MJ/L)32.36-34.66 21.27-23.56 33.32-35.6627
Cetane number40-550-5448-6517
Freezing point(°C)-40 - -1-114-3 -19-89.3
Viscosity( @ 20°C)(mm2/s)2.8-
Flash point(°C)60-8012.8100-17035

The Ideal Fuel is Microbially-Produced Diesel

Washington2011 PetroBiofuel.png

The ideal fuel would be compatible with modern engines and infrastructure, and also be able to be produced in a renewable manner. No current biofuel has the same identical enough to that of diesel to be able to fully integrate with current engines and infrastructure. No known alternative fuel is able to match the chemical properties of diesel. Currently, the only way to renewably produce a fuel with the chemical properties and compatibility of diesel would be to make a biofuel with a composition identical to that of diesel. This would require a biological pathway that is able to produce alkanes, the main class of compounds in diesel. Alkanes are simple chains of carbon and hydrogen. The majority of the alkanes found in diesel have a carbon chain of 10 to 20 carbons long. Alkanes make up approximately 62% of jet diesel (a fairly representative diesel fuel)( [7]). This 62% includes 34% straight chain alkanes that contain only one linear chain, and 28% branched chain alkanes that contain 1 or more carbon branches. The remaining 38% consists mostly of cyclic and aromatic hydrocarbons. If long (10+) chain length alkanes could be biologically produced, it would allow for the production of a fuel that is both renewable and fully compatible with current engines and infrastructure.

The Solution: a Microbial Alkane Production Pathway

The use of AAR and ADC converts the fatty acid intermediate Acl-ACP into an aldehyde, then an alkane--biofuel. Acyl-ACP is naturally produced by all organisms, which increases host choice considerably

A recent study( [8]),has shown the production of long chain length alkanes in E. coli using two genes found in many cyanobacteria species. The first gene codes for Acyl-ACP Reductase (AAR) which reduces long chain length acyl-ACPs into the corresponding fatty aldehydes. Acyl-ACPs are essential intermediates in fatty acid biosynthesis in every known organism, meaning that this system can work in a wide range of organisms. This long chain fatty acid acts as a substrate for Aldehyde Decarbonylase (ADC), the enzyme that removes the carbonyl group (C=O) from the fatty aldehyde, yielding an alkane one carbon shorter than the original Acyl-ACP and a molecule of formate. Since the vast majority of the fatty acyl-ACPs produced by E. coli have an even chain length, this system produces detectable amounts of only odd chain length alkanes. This study reported production of the C13, C15, and C17 alkanes, as well as the C17 alkene (unsaturated hydrocarbon). This chain length range falls well within the range of those found in diesel, so this system is theoretically able to make the alkane portion of a fuel compatible with current engines and infrastructure.

The PetroBrick: A modular and open platform for the biological production of diesel fuel

Washington 2011 PetroBrick.png

The goal of our "Make It: Diesel Production" portion of this summer's iGEM project is to turn convert this recently discovered set of enzymes (AAR and ADC) for microbial alkane production into an open and modular platform for iGEM teams to develop into a robust replacement for petrochemical fuels. Our alkane production system is specifically designed to be easily improved upon, and we have started work on improving this open system, both by increasing alkane yields and by changing the product produced. In addition, we have started to move this system into an alternative chassis, yeast.




3. Anaerobic Metabolism of Biodiesel and Its Impact on Metal Corrosion Deniz F. Aktas, Jason S. Lee, Brenda J. Little, Richard I. Ray, Irene A. Davidova, Christopher N. Lyles, Joseph M. Suflita Energy & Fuels 2010 24 (5), 2924-2928(



6. The viscosities of three biodiesel fuels at temperatures up to 300°C R.E. Tate, K.C. Watts, C.A.W. Allen K.I. Wilkie Fuel 2006 85, 1010-1015 (


8. Microbial Biosynthesis of Alkanes Andreas Schirmer, Mathew A. Rude, Xuezhi Li, Emanuela Popova and Stephen B. del Cardayre Science 30 July 2010: Vol. 329 no. 5991 pp. 559-562


10.Metabolic engineering of Escherichia coli for 1-butanol production Shota Atsumi, Anthony F. Cann, Michael R. Connor, Claire R. Shen, Kevin M. Smith, Mark P. Brynildsen, Katherine J.Y. Chou, Taizo Hanai1, James C. Liao Metabolic Engineering Volume 10, Issue 6, November 2008, Pages 305-311