Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization

From 2011.igem.org

(Difference between revisions)

Latest revision as of 20:01, 5 October 2011

The system is customizable!!

Customization of the Plug 'n' Play with DNA assembly standard opens the door to a wide range of applications.

When do you need to customize the system?

When a desired biological part is not yet a part of the Plug'n'Play with DNA kit.

When seamless assembly is required (e.g. protein fusion).

When the introduction of mutations are required.

When the introduction of deletions are required.

When short sequences such as linkers, RBSs, signal peptides etc. are required.

A guide for the most common design requests is given below. The guide is based on work conducted by Morten H. H. Nørholm and Hansen et. al. Figures obtained from Genee et al. (in preparation).

Creating new parts

Creating new biological parts can be necessary, when they are not already included in the Plug 'n' Play kit and submitted to the Registry of Standard Biological Parts.

1. To create a new part, forward and reverse primers have to be designed for the DNA of interest. The free-ware netprimer is an excellent tool for finding suitable primers.

2. In accordance with the Plug’n’Play assembly system the category of the part i.e. promoter, GOI, TS, module, or marker cassette has to be determined.

3. Subsequently the linkers belonging to the category have to be identified. The appropriate linkers and Plug'n'Play tail for the part can be found in the linker table. The forward and reverse primer linkers are 8-9 bp long, and are placed at the 5’-end of the primers.

5. Order the primers from your favourite oligo company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.

6. After receiving the primers, you are ready to perform the PCR (see protocol Amplification of biobricks by PCR ). Be aware that the addition of the linker to the primer may increase the melting temperature of the primer.

7. Check the band size of the PCR product on an agarose-gel. The new BioBrick can be used directly or purified by agarose-gel purification.

8. The assembly of the new BioBricks should be performed according to the protocol USER cloning.

9. You should now have assembled one new plasmid or linear device.

Seamless assembly

Seamless assembly is often required when constructing fusion protein or if large genetic parts have to be assembled in pieces, e.g. when constructing complex enzymes and synthases for fungi.

1. If you want to design a construct where all parts are seamlessly assembled go directly to step 2. Otherwise the standard linkers should be added to the parts that do not need to be fused seamless according to the linker table. For more details see the 'creating new parts' section.

2. To design the primers for the seamless assembly the software PHUSER can be used. This software was created by the DTU iGEM team from 2009.

3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.

4. To amplify the BioBricks the protocol Amplification of biobricks by PCR can be used.

5. Check the PCR reaction on an agarose-gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification.

6. The assembly of new BioBricks is executed according to the protocol USER cloning.

7. A scar free BioBrick device or plasmid should now have been assembled.

Point mutations

The introduction of point mutations can have different purposes, for instance the removal of undesired restriction site or for alteration of a proteins catalytic function. When introducing mutations it is only necessary for the primers to overlap in the complementary region (linker). Depending on whether the point mutation should be degenerate or not only one or both primers needs to carry the mutation. Degeneration means that more than one codon may code for the same amino acid. Thereby, a degenerate mutation can give different outcomes in use of tRNA's.

Introducing a point mutation with non-degenerate codons
Both primers have to carry the desired mutation to ensure that the codon and the resulting amino acid are generated by the mutation.

1. To introduce a point mutation in a vector, the mutation has to be defined first.

2. To design the primers the software PHUSER can be used. Remember to introduce the desired mutation into the primer. Two primers are used per mutation.

3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.

4. To amplify the BioBricks the protocol Amplification of biobricks by PCR can be used.

5. Check the PCR reaction on an agarose gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification if needed.

6. The assembly of new BioBricks should be performed according to the protocol USER cloning.

7. A BioBrick, device or plasmid with the desired point mutation should now have been assembled.

Introducing a degenerate point mutation, which can give a different codon usage
Only one primer has to carry the desired point mutation. The procedure of assembly is the same as for the non-degenerate point mutation above.

It is also possible to introduce several point mutations in different regions by customizing the Plug 'n' Play assembly standard. This only requires one round of PCR and one round of cloning. The difference is that the PCR fragments made for each mutation will have to be fused together meaning that the introduction of two mutations would require the fusion of three PCR fragments, and so on.

Deletions

With this guide a gene or part of a gene or any other desired sequence of a plasmid, device, or BioBrick can be deleted.

1. First the site of the deletion should be defined.

2. The primers need to be designed so that the fusion point will bridge two desired sections of the gene at the matching USER linkers.

3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.

4. To amplify the BioBricks the protocol Amplification of biobricks by PCR can be used.

5. Check the PCR reaction on an agarose gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification if needed.

6. The assembly of new BioBricks should be performed according to the protocol USER cloning.

7. A BioBrick, device or new plasmid with the deletion should now have been assembled.

Adding short sequences

Short sequences such as ribosomal binding sites, kozak sequences etc. can be added by incorporating them into the primer that will be used to amplify the part it should be fused with. Introducing a short sequence can also be of interest when two proteins are wished to be connected by a linker. The linker can also carry a single point mutation, be degenerate or non-degenerate, which means that only one or both primers needs to carry the mutation. When creating a linker a short sequence of either random or known sequence is added by incorporating the sequence into the forward or reverse primers.

Introducing a linker

1. When introducing a linker in the connection with a gene of interest (GOI), the first step is to define the mutation.

2. Primers are designed for the defined mutation site. To introduce the desired mutation one nucleotide should be changed in the primer. Four primers are used per mutation.

3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.

4. To amplify the BioBricks the protocol Amplification of biobricks by PCR can be used.

5. Check the PCR reaction on an agarose gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification if needed.

6. The assembly of new BioBricks and parts should be performed according to the protocol USER cloning.

The figure below shows the process of creating a degenerate linker (illustrated with a loop). Primers can be designed by using the standard Plug’n’Play linkers.

Illustrated below the process of creating a non-degenerate linker.

Example

Synthetic biology is all about creativity, and sometimes the standard is just not enough, making it necessary to combine the above mentioned customizations. The figure below illustrates that "Plug 'n' Play with DNA" makes it possible to assemble a degenerate linker (red), a non-degenerate linker (yellow), introduce a non-degenerate point mutation (X) as well as a degenerate point mutation (N) into one plasmid in just ONE round of cloning.

Linker table

Tips & Tricks

Design primers så the Tms between forward and reverse primer are within 2-5°C.

Remember that the annealing temperature should normally be 3°C under the Tm. However, when the linker is added to the primer, the Tm is increased. We have experienced that the best results are obtain when the final annealing temperature is above 62°C, if the primer have a Tm around 59°C to begin with.

The X7 Phusion polymerase have in the PCR reaction a extension time of 1000bp per minut.

References

[1] Nørholm, M.H.H. A mutant Pfu DNA polymerase designed for advanced uracil-excision DNA engineering. BMC Biotechnol. 10, 21, 2010.

[2] Hansen, B. G.; Salomonsen, B.; Nielsen, M. T.; Nielsen, J. B.; Hansen, N. B.; Nielsen, K.F.; Regueira, T. B.; Nielsen, J.; Patil, K. R.; Mortensen, U. H.; “Versatile enzyme expression and Characterization system for Aspergillus, with the Penicillium brevicompactum Polyketide Synthase Gene from the Mycophenolic Acid Gene Cluster as a Test Case.” American Society for Microbiology, 2011, 3044-3051.

[3] Genee HJ, Bonde MT, Bagger FO, Olsen LR. PHUSER v2 (In preparation).

@@ Line 3: / Line 3: @@
 <html>
 <head>
+ <script type="text/javascript" src="http://users.skumleren.net/gumle/lightbox/js/prototype.js"></script>
+  <script type="text/javascript" src="http://users.skumleren.net/gumle/lightbox/js/scriptaculous.js?load=effects,builder"></script>
+  <script type="text/javascript" src="http://users.skumleren.net/gumle/lightbox/js/lightbox.js"></script>
+  <link rel="stylesheet" href="http://users.skumleren.net/gumle/lightbox/css/lightbox.css" type="text/css" media="screen" />
+ <script type="text/javascript" src="http://users.skumleren.net/gumle/lightbox/lightboxSEB.js"></script>
+<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" charset="utf-8"></script>
+<script type="text/javascript" charset="utf-8">
+var $j = jQuery.noConflict();
+jQuery(document).ready(function(){
+  var menu = $j('#menu')
+  var pos = menu.position().top;
+  var offset = 20;
+  $j(window).scroll(function(){
+    $j('#test').text(menu.position().top);
+    if(($j(this).scrollTop() + menu.height() + offset) > $j('#EndOfPage').position().top) {
+      menu.css("position", "absolute");
+      menu.css("top", ($j('#EndOfPage').position().top - menu.height()) + "px");
+    }else{
+      if(($j(this).scrollTop() + offset) > pos) {
+        menu.css("position", "fixed");
+        menu.css("top", offset + "px");
+      }else{
+        menu.css("position", "relative");
+        menu.css("top", "0px");
+      }
+    }
+  });
+});
+</script>
 <style type="text/css">
@@ Line 17: / Line 53: @@
      padding-right: 20px;
      padding-left: 20px;
-     padding-top:20px;
+     padding-top: 20px;
-     padding-bottom:20px;
+     padding-bottom: 20px;
 }
+  div.thumbnail {
+      float: center;
+      margin: 10px;
+      height: 120px;
+    }
 table {
@@ Line 42: / Line 86: @@
    margin-left: 10px;
 }
 </style>
@@ Line 49: / Line 95: @@
 <div class="text">
 <font color=" #990000" face="arial" size="6">
 <br><br>
 <b>The system is customizable!!</b><br> <br>
 </font>
-</div>
 <table cellpadding=5px>
-<th>
+<tr>
-<td width="500px" height="100%" valign="top" valign="center" >
+<td height="100%" valign="top" valign="center" >
 <br>
 <div id="menu">
 <!--<span id="test">test</span>-->
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#When do you need to customize the system?" class="h1"> <b>1</b> When do you need to customize the system?</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#When do you need to customize the system?" class="h1"> When do you need to customize the system?</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Seamless assembly" class="h1"> <b>2</b> Seamless assembly</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Seamless assembly" class="h1"> Seamless assembly</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Point mutations" class="h1"><b>3</b> Point mutations</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Point mutations" class="h1"> Point mutations</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Deletions" class="h1"><b>4</b> Deletions</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Deletions" class="h1"> Deletions</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Adding short sequences" class="h1"><b>5</b> Adding short sequences</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Adding short sequences" class="h1"> Adding short sequences</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Example" class="h1"><b>6</b> Example</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Example" class="h1"> Example</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Linker table" class="h1"><b>7</b> Linker table</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Linker table" class="h1"> Linker table</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Tips & Tricks" class="h1"><b>8</b> Tips & Tricks</a><br><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Tips & Tricks" class="h1"> Tips & Tricks</a><br><br>
-<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#References" class="h1"><b>9</b> References</a><br>
+<a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#References" class="h1"> References</a><br>
 </div>
 </td>
-</th>
-<th>
 <td width="75%" height="100%" valign="top">
 <br>
-<br>
+<p align="justify">
+Customization of the Plug 'n' Play with DNA assembly standard opens the door to a wide range of applications.</p>
+<br>
 <a name="When do you need to customize the system?"></a><h2><b>When do you need to customize the system?</b></h2>
+<p align="justify">
+<dt>
+<dd><li>When a desired biological part is not yet a part of the Plug'n'Play with DNA kit. </li></dd>
+<dd><li>When seamless assembly is required (e.g. protein fusion).</li></dd>
+<dd><li>When the introduction of mutations are required.</li></dd>
+<dd><li>When the introduction of deletions are required.</li></dd>
+<dd><li>When short sequences such as linkers, RBSs, signal peptides etc. are required.</li></dd>
+</dt>
+<br><br>
+A guide for the most common design requests is given below. The guide is based on work conducted by Morten H. H. Nørholm and Hansen et. al. Figures obtained from Genee et al. (in preparation).
+</p>
-<p align="justify">
-•	When a desired biological part is not yet a part of the Plug'n'Play with DNA kit
-<br>
-•	When seamless assembly is required (e.g. protein fusion)
-<br>
-•	When the introducing of mutation is required.
 <br>
-•     When the introducing of deletion is required.
-<br>
-•	When a short sequences such as an linker, RBS, signal peptide etc are required.
+<a name="Creating new parts"></a><h2><b>Creating new parts</b></h2>
+<p align="justify">
+Creating new biological parts can be necessary, when they are not already included in the Plug 'n' Play kit and submitted to the Registry of Standard Biological Parts.</p><br>
+<p align="justify">
+<dt>
+<dd>1.	To create a new part, forward and reverse primers have to be designed for the DNA of interest. The free-ware <a href="http://www.premierbiosoft.com/netprimer/index.html">netprimer</a> is an excellent tool for finding suitable primers.</dd>
+<dd>2.	In accordance with the Plug’n’Play assembly system the category of the part i.e. promoter, GOI, TS, module, or marker cassette has to be determined.</dd>
+<dd>3.	Subsequently the linkers belonging to the category have to be identified. The appropriate linkers and Plug'n'Play tail for the part can be found in the <a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Linker table">linker table</a>. The forward and reverse primer linkers are 8-9 bp long, and are placed at the 5’-end of the primers. </dd>
+<dd>5.	Order the primers from your favourite oligo company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.</dd>
+<dd>6.	After receiving the primers, you are ready to perform the PCR (see protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> ). Be aware that the addition of the linker to the primer may increase the melting temperature of the primer. </dd>
+<dd>7.	Check the band size of the PCR product on an agarose-gel. The new BioBrick can be used directly or purified by agarose-gel purification. </dd>
+<dd>8.	The assembly of the new BioBricks should be performed according to the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning"> USER cloning</a>. </dd>
+<dd>9.	You should now have assembled one new plasmid or linear device.</dd>
+</dt>
 </p>
+<br>
-<br><br>
-<a name="Creating new parts"></a><h2><b>Creating new parts</b></h2>
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
+</a>
-.	To create a new part, primers have to be designed as normally performed for the DNA of interest. The free-ware <a href="http://www.premierbiosoft.com/netprimer/index.html">netprimer</a> can assist in finding suitable primers.<br>
-.	To make the part compatible with the standard Plug’n’Play assembly system, the category of the part i.e. promoter, GOI, TS, module, or marker cassette have to be determined.<br>
-.	Subsequently the linker of the category have to be identified. The appropriate linker and Plug 'n' Play tails for the part can be found in the <a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Linker table">Linker table</a>. The forward and reverse primer tail is listed, and just have to be added in front of the primers found in the 1. point.<br>
-.	These 8-9 base sequences are simply placed at the 5’-end of the primers. <br>
-.	The primers are ordered from the favourite company of oligos. Notice that ordering primers with a uracil incorporated increases the price of primers and longer delivery time. Integrated DNA Technology offers a fair price for such primers and deliver in two days.<br>
-.	When primers are received the PCR reaction can be set up. Usage of the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> should ensure results. Furthermore, be aware that the primer extension will increase the annealing temperature. <br>
-.	Check the PCR reaction on an agarose-gel according to expected size. The new BioBrick can be used directly or purified by agarose-gel purification before usage. <br>
-.	The assembly of new BioBricks parts are executed with the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning"> USER cloning</a>. <br>
-.	One new vector have been assembled.
+<a name="Seamless assembly"></a><h2><b>Seamless assembly</b></h2>
+<p align="justify">
+Seamless assembly is often required when constructing fusion protein or if large genetic parts have to be assembled in pieces, e.g. when constructing  complex enzymes and synthases for fungi.</p>
 <br>
+<p align="justify">
+<dt>
+<dd>1.	If you want to design a construct where all parts are seamlessly assembled go directly to step 2. Otherwise the standard linkers should be added to the parts that do not need to be fused seamless according to the <a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Linker table">linker table</a>. For more details see the 'creating new parts' section.</dd>
+<dd>2.	To design the primers for the seamless assembly the software <a href="http://www.cbs.dtu.dk/services/PHUSER/">PHUSER</a> can be used. This software was created by the DTU iGEM team from 2009.</dd>
+<dd>3.	The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.</dd>
+<dd>4.	To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> can be used. </dd>
+<dd>5.	Check the PCR reaction on an agarose-gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification. </dd>
+<dd>6.	The assembly of new BioBricks is executed according to the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning"> USER cloning</a>. </dd>
+<dd>7.	A scar free BioBrick device or plasmid should now have been assembled.</dd>
+</p>
 <br>
-<img src="https://static.igem.org/mediawiki/2011/f/f8/Koncept_igem_forside_1.png" height="200px" > </img> &nbsp;
+<p align="center">
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
+</a>
+</p>
 <br>
 <br>
-<br><br>
-<a name="Seamless assembly"></a><h2><b>Seamless assembly</b></h2>
-<br>
-.	Depending on how many scar free parts wished to be assembled, the correspondent linkers can be found in the <a href="https://2011.igem.org/Team:DTU-Denmark-2/Project/PlugnplayAssembly/customization#Linker table">Linker table</a>. The linkers are placed as extension on the forward and reverse primers for the parts.<br>
+<a name="Point mutations"></a><h2><b>Point mutations</b></h2>
-.	To design the primers for the scar-free assembly the software <a href="http://www.cbs.dtu.dk/services/PHUSER/">PHUSER</a> developed by the DTU iGEM team from 2009 can be used.<br>
+<p align="justify">
-.	The primers are ordered from the favourite company of oligos. Notice that ordering primers with a uracil incorporated increases the price of primers and longer delivery time. Integrated DNA Technology offers a fair price for such primers and deliver in two days.<br>
+The introduction of point mutations can have different purposes, for instance the removal of undesired restriction site or for alteration of a proteins catalytic function. When introducing mutations it is only necessary for the primers to overlap in the complementary region (linker). Depending on whether the point mutation should be degenerate or not only one or both primers needs to carry the mutation. Degeneration means that more than one codon may code for the same amino acid. Thereby, a degenerate mutation can give different outcomes in use of tRNA's.</p><br>
-.	To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> are used. <br>
-.	Check the PCR reaction on an agarosegel before assembly. The new BioBricks can be used directly or purified by agarosegelpurification if needed. <br>
-.	The assembly of new BioBricks parts are executed with the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning"> USER cloning</a>. <br>
-.	Now, one new scar free BioBrick have been assembled.<br><br>
-<img src="https://static.igem.org/mediawiki/2011/6/6d/Customization_seemless_assembly.png" height="200px" > </img> &nbsp;
+<p align="justify">
-<br>
+<b>Introducing a point mutation with non-degenerate codons</b><br>
+Both primers have to carry the desired mutation to ensure that the codon and the resulting amino acid are generated by the mutation.</p><br>
+<p align="justify">
+<dt>
+<dd>1. To introduce a point mutation in a vector, the mutation has to be defined first.</dd>
+<dd>2. To design the primers the software <a href="http://www.cbs.dtu.dk/services/PHUSER/">PHUSER</a> can be used. Remember to introduce the desired mutation into the primer. Two primers are used per mutation.</dd>
+<dd>3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.</dd>
+<dd>4. To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> can be used. </dd>
+<dd>5. Check the PCR reaction on an agarose gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification if needed. </dd>
+<dd>6.	The assembly of new BioBricks should be performed according to the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning">USER cloning</a>. </dd>
+<dd>7.	A BioBrick, device or plasmid with the desired point mutation should now have been assembled.</dd>
+</dt>
+</p>
 <br>
+<p align="center">
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
+</a>
+</p>
-<a name="Point mutations"></a><h2><b>Point mutations</b></h2>
 <br>
-When introducing the mutation it is only neccessary for the primers to overlap in the complementary region (linker) and only one primer needs to carry the mutation.
+<p align="justify">
-<br><br>
+<b>Introducing a degenerate point mutation, which can give a different codon usage</b><br>
-<b>Introducing point mutations in vectors</b><br><br>
+Only one primer has to carry the desired point mutation. The procedure of assembly is the same as for the non-degenerate point mutation above.</p><br>
-. To introduce a mutation in a vector, the mutation has to be defined first.<br>
+<p align="center">
-. The software PHUSER developed by the DTU iGEM team 2009, can be used to easily design primers for the defined mutation site. To introduce the desired mutation one nucleotide  are changed. Two primers are used per mutation.<br>
-. The primers are ordered from the favourite company of oligos. Notice that ordering primers with a uracil incorporated increases the price of primers and longer delivery time. Integrated DNA Technology offers a fair price for such primers and deliver in two days<br>
-. To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> are used. <br>
-. Check the PCR reaction on an agarosegel before assembly. The new BioBricks can be used directly or purified by agarosegelpurification if needed. <br>
-.	The assembly of new BioBricks parts are executed with the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning">USER cloning</a>. <br>
-.	Now, one new BioBrick with mutation in vector have been assembled.<br><br>
-<img src="https://static.igem.org/mediawiki/2011/b/b9/Customization_point-mutation_not_degenerate.png" with="200px"height="200px alt="""/>
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
-<br><br><br>
+</a>
+</p>
-<b>Introducing point mutations in a gene of interest</b><br><br>
+<br>
+<p align="justify">
+It is also possible to introduce several point mutations in different regions by customizing the Plug 'n' Play assembly standard. This only requires one round of PCR and one round of cloning. The difference is that the PCR fragments made for each mutation will have to be fused together meaning that the introduction of two mutations would require the fusion of three PCR fragments, and so on.</p><br>
-. To introduce mutation in a gene of interest (GOI), the mutation are first defined.<br>
-. The software PHUSER developed by the DTU iGEM team 2009, can be used to easily design primers for the defined mutation site. To introduce the desired mutation one nucleotide are changed. Four primers are used per mutation.<br>
-. The primers are ordered from the favourite company of oligos. Notice that ordering primers with a uracil incorporated increases the price of primers and longer delivery time. Integrated DNA Technology offers a fair price for such primers and deliver in two days.<br>
-. To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> are used. <br>
-. Check the PCR reaction on an agarosegel before assembly. The new BioBricks can be used directly or purified by agarosegelpurification if needed. <br>
-.	The assembly of new BioBricks parts are executed with the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning">USER cloning</a>. <br>
-.	Now, one new BioBrick with mutation in GOI have been assembled.<br><br>
-<img src="https://static.igem.org/mediawiki/2011/c/cb/Customization_linker_not_degenerate.png" with="200px"height="200px alt="""/>
-<br><br><br>
+<a name="Deletions"></a><h2><b>Deletions</b></h2>
+<p align="justify">
+With this guide a gene or part of a gene or any other desired sequence of a plasmid, device, or BioBrick can be deleted. <br><br>
+<dt>
+<dd>1. First the site of the deletion should be defined.</dd>
+<dd>2. The primers need to be designed so that the fusion point will bridge two desired sections of the gene at the matching USER linkers.</dd>
+<dd>3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.</dd>
+<dd>4. To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> can be used. </dd>
+<dd>5. Check the PCR reaction on an agarose gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification if needed. </dd>
+<dd>6.	The assembly of new BioBricks should be performed according to the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning">USER cloning</a>. </dd>
+<dd>7. A BioBrick, device or new plasmid with the deletion should now have been assembled.</p></dd>
+</dt>
-<b>Introducing several point mutations</b><br><br>
-It is possible to introduce several point mutations in different regions of interest by customizing the Plug’n’Play assembly standard. This still only requires one round of PCR and one round of cloning, the only difference is that more PCR fragments will have to be fused. This means that the introduction of two mutations would require the fusion of three PCR fragments, and so on.<br><br>
+<p align="center">
-. To introduce more than one mutation in different regions, the mutations are first defined.<br>
-. The software PHUSER developed by the DTU iGEM team 2009, can be used to easily design primers for the pre defined mutations site. To introduce the desired mutations one nucleotide are changed in the primer for each mutation site. <br>
-.  The primers are ordered from the favourite company of oligos. Notice that ordering primers with a uracil incorporated increases the price of primers and longer delivery time. Integrated DNA Technology offers a fair price for such primers and deliver in two days.<br>
-.To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> are used. <br>
-. Check the PCR reaction on an agarosegel before assembly. The new BioBricks can be used directly or purified by agarosegelpurification if needed. <br>
-.	The assembly of new BioBricks parts are executed with the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning">USER cloning</a>. <br>
-.	Now, one new BioBrick with mutations in several regions have been assembled. <br><br>
-<img src="https://static.igem.org/mediawiki/2011/f/fc/Customization_point-mutation_degenerate.png" with="200px"height="200px alt="""/>
-<br><br>
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
-<a name="Deletions"></a><h2><b>Deletions</b></h2>
+</a>
-<br>
-. To introduce deletion, first define the deletion site.<br>
+</p>
-. The software PHUSER developed by the DTU iGEM team from 2009. The design of primers has to be done so the fusion point will bridge two desired sections of the gene at the matching USER linkers.<br>
-.  The primers are ordered from the favourite company of oligos. Notice that ordering primers with a uracil incorporated increases the price of primers and longer delivery time. Integrated DNA Technology offers a fair price for such primers and deliver in two days.<br>
-.To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> are used. <br>
-. Check the PCR reaction on an agarosegel before assembly. The new BioBricks can be used directly or purified by agarosegelpurification if needed. <br>
-.	To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> are used. <br>
-.	Now, one new BioBrick with deletion have been assembled.<br><br>
-<img src="https://static.igem.org/mediawiki/2011/e/ee/Customization_deletion.png" with="200px"height="200px alt="""/>
 <br><br>
 <a name="Adding short sequences"></a><h2><b>Adding short sequences</b></h2>
-<br>
+<p align="justify">
+Short sequences such as ribosomal binding sites, kozak sequences etc. can be added by incorporating them into the primer that will be used to amplify the part it should be fused with.
+Introducing a short sequence can also be of interest when two proteins are wished to be connected by a linker. The linker can also carry a single point mutation, be degenerate or non-degenerate, which means that only one or both primers needs to carry the mutation.
+When creating a linker a short sequence of either random or known sequence is added by incorporating the sequence into the forward or reverse primers.</p><br>
-A short sequence is simply added by incorporating the sequence into the forward or reverse primer. This has been illustrated with a loop in the figure below. Primers can be designed by using the standard Plug’n’Play linkers or by using the software PHUSER. <br><br>
+<b>Introducing a linker</b><br>
+<p align="justify">
+<dt>
+<dd>1. When introducing a linker in the connection with a gene of interest (GOI), the first step is to define the mutation.</dt>
+<dd>2. Primers are designed for the defined mutation site. To introduce the desired mutation one nucleotide should be changed in the primer. Four primers are used per mutation.</dt>
+<dd>3. The primers are ordered from your favourite company. Notice that the price can be a bit higher and delivery time a bit longer, when ordering primers with a uracil incorporated. We have had a good experience with the price, delivery time and quality of the primers ordered from Integrated DNA Technology.</dt>
+<dd>4. To amplify the BioBricks the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#PCR">Amplification of biobricks by PCR</a> can be used. </dt>
+<dd>5. Check the PCR reaction on an agarose gel before assembly. The new BioBricks can be used directly or purified by agarose-gel purification if needed. </dt>
+<dd>6.	The assembly of new BioBricks and parts should be performed according to the protocol <a href="https://2011.igem.org/Team:DTU-Denmark-2/Team/Protocols#USER cloning">USER cloning</a>. </dt>
+</dt>
+<p align="justify">
+The figure below shows the process of creating a degenerate linker (illustrated with a loop). Primers can be designed by using the standard Plug’n’Play linkers.</p> <br>
+<p align="center">
-<img src="https://static.igem.org/mediawiki/2011/a/a3/Customization_linker_degenerate.png" with="200px"height="200px alt="""/>
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
+</a>
+</p>
 <br><br>
+Illustrated below the process of creating a non-degenerate linker.<br><br>
+<p align="center">
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
+</a>
+</p>
-<a name="Example"></a><h2><b>Example</b></h2>
 <br>
-Synthetic biology is all about creativity, and sometimes the standard is just not enough making it necessary to combine the above mentioned customizations. The figure below illustrates, that it is possible in only one cloning round to assemble a degenerate linker (green), a non-degenerate linker (yellow), introduce a non-degenerate point mutation (green) as well as a degenerate point mutation(yellow) to one plasmid. <br><br>
-<img src="https://static.igem.org/mediawiki/2011/9/9d/Customization_combination.png" with="200px"height="200px alt="""/>
+<a name="Example"></a><h2><b>Example</b></h2>
+<p align="justify">
+Synthetic biology is all about creativity, and sometimes the standard is just not enough, making it necessary to combine the above mentioned customizations. The figure below illustrates that "Plug 'n' Play with DNA" makes it possible to assemble a degenerate linker (red), a non-degenerate linker (yellow), introduce a non-degenerate point mutation (X) as well as a degenerate point mutation (N) into one plasmid in just ONE round of cloning. </p> <br>
+<p align="center">
+<a href="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" rel="lightbox" title="">
+  <img src="https://static.igem.org/mediawiki/igem.org/7/79/Mathilde.png" alt="" height="200px" />
+</a>
+</p>
 <br><br>
@@ Line 218: / Line 322: @@
 <a name="Linker table"></a><h2><b>Linker table</b></h2>
 <br>
-<br>
-<center><img src="https://static.igem.org/mediawiki/2011/a/ac/Linkertable.png" with="400px"height="400px alt="""/></center>
+<p align="center">
+<img src="https://static.igem.org/mediawiki/2011/a/ac/Linkertable.png" with="400px"height="400px"></img>
+</p>
 <br>
 <br>
-<CENTER><img src="https://static.igem.org/mediawiki/2011/f/fe/Overveiw_tails_2.png" height="100px"> </img></center>
+<p align="center">
+<img src="https://static.igem.org/mediawiki/2011/f/fe/Overveiw_tails_2.png" height="100px"> </img>
+</p>
 <br>
 <br>
+<p align="center">
-<center><img src="https://static.igem.org/mediawiki/2011/2/27/Overveiw_module_tails-TS.png" height="100px" align="center"> </img></center>
+<img src="https://static.igem.org/mediawiki/2011/2/27/Overveiw_module_tails-TS.png" height="100px" > </img>
+</p>
@@ Line 237: / Line 348: @@
 <br><br>
 <a name="Tips & Tricks"></a><h2><b>Tips & Tricks</b></h2>
-<br>
+<dd>
- Design primers so their mutual Tm's are within 2°C.
+<li> Design primers så the Tms between forward and reverse primer are within 2-5°C.</li>
-<br><br><br>
+<li> Remember that the annealing temperature should normally be 3°C under the Tm. However, when the linker is added to the primer, the Tm is increased. We have experienced that the best results are obtain when the final annealing temperature is above 62°C, if the primer have a Tm around 59°C to begin with.</li>
+<li> The X7 Phusion polymerase have in the PCR reaction a extension time of 1000bp per minut.</li>
+</dd>
+<br><br>
 <a name="References"></a><h2><b>References</b></h2>
-<br>
-Nørholm, M. H. H. A mutant Pfu DNA polymerase designed for advanced uracil-excision DNA engineering. BMC Biotechnol. 10, 21 (2010).<br>
+[1] Nørholm, M.H.H. A mutant Pfu DNA polymerase designed for advanced uracil-excision DNA engineering. BMC Biotechnol. 10, 21, 2010.<br><br>
-Hansen, Bjarke G.; Bo Salomonsen; Morten T. Nielsen; Jakob B. Nielsen; Niels B. Hansen; Kristian F. Nielsen; Torsten B. Regueira; Jens Nielsen; Kiran R. Patil; and Uffe H. Mortensen; “Versatile enzyme expression and Characterization system for Aspergillus, with the Penicillium brevicompactum Polyketide Synthase Gene from the Mycophenolic Acid Gene Cluster as a Test Case.” American Society for Microbiology, 2011, 3044-3051.<br><br>
-https://2009.igem.org/Team:DTU_Denmark
+[2] Hansen, B. G.; Salomonsen, B.; Nielsen, M. T.; Nielsen, J. B.; Hansen, N. B.; Nielsen, K.F.; Regueira, T. B.; Nielsen, J.; Patil, K. R.; Mortensen, U. H.; “Versatile enzyme expression and Characterization system for Aspergillus, with the Penicillium brevicompactum Polyketide Synthase Gene from the Mycophenolic Acid Gene Cluster as a Test Case.” American Society for Microbiology, 2011, 3044-3051.<br><br>
+[3] Genee HJ, Bonde MT, Bagger FO, Olsen LR. PHUSER v2 (In preparation).
+<br><br>
@@ Line 254: / Line 371: @@
 </tr>
 </table>
+</div>
 <div id="EndOfPage"></div>
-<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" charset="utf-8"></script>
-<script type="text/javascript" charset="utf-8">
-$(function(){
-//  $('#test').text($(this).scrollTop());
-  var menu = $('#menu')
-  var pos = menu.position().top;
-  var offset = 20;
-  $(window).scroll(function(){
-    $('#test').text(menu.position().top);
-    if(($(this).scrollTop() + menu.height() + offset) > $('#EndOfPage').position().top) {
-      menu.css("position", "absolute");
-      menu.css("top", ($('#EndOfPage').position().top - menu.height()) + "px");
-    }else{
-      if(($(this).scrollTop() + offset) > pos) {
-        menu.css("position", "fixed");
-        menu.css("top", offset + "px");
-      }else{
-        menu.css("position", "relative");
-        menu.css("top", "0px");
-      }
-    }
-  });
-});
-</script>