Team:BU Wellesley Software/Notebook/EvelynNotebook

From 2011.igem.org

Revision as of 19:20, 21 July 2011 by Evorozco (Talk | contribs)

Contents

Week 6/1/11-6/3/11

Participated in iGEM bootcamp. For the week we we learned bio-basics, CAD basics, Tuberculosis overview, digital logic design and clotho. For clotho we built an application that would show hello world and then we modified the app so that another user could input a part sequence that would be stored in the clotho database. Finally we had a group outing at Jillian's.

Week 6/6/11-6/10/11

On the last day of bootcamp we learned more information on synthetic biology and gave the Wellesley team a tour of the wetlab and our liquid handling robot. The next day I worked with Kyle Jones to look for constitutive promoters in the MIT Registry of Parts. We decided to use BBa_J23100, BBa_J23101, BBa_J23109, and BBa_I14053. The first three are part of the Anderson Collection and are Amp Resistant. These promoters had RBS inside their plasmids. The last constitutive promoter is Kan resistant. Vanessa Yanez and Alberto looked for induced promoters and Shannon and Margueax looked for RBSs. After locating our parts we transformed them and let them sit over night. Unfortunately the parts that we transformed did not work after the plasmid prep. We had low values for the concentration and realized that the cultures that did grow in the LB and amp solution was not E coli. In order to confirm our suspicions we looked at the culture under a light microscope. My cultures seemed to have string like cells which we concluded to be contamination. Only 1 culture worked out of the 18 that were performed that week. Finally we met together to figure out how we wanted to split up the work and what exactly we wanted to do as a team. Margeaux and Alberto did mini prepreps, restriction digest, gel extraction, ligations, and finally transformations for GFP and terminators. The rest of us redid all the old procedures in search for the reason for the contamination.

Week 6/12/11-6/17/11

In order to decrease contamination we autoclaved the pipet tips and used aseptic techniques where applicable. We redid the plasmid preps for the same parts. This time we grew the Ecoli in just LB solution and then in LB with Amp. The next morning we discovered that the cells in the LB and Amp solutions did not grow while the cells in the LB solution did. This proved our suspicion that the plates were our problem. On Monday we prepped the UV inducible promoter for the QiaCube. The UV promoter was the only transformation and plasmid prep that worked. We did the transformation on the existing Amp plates but this time we used a negative control. After incubating the transformed cells we discovered that the negative control did in fact grow colonies. This lead us to making new Amp plates and redoing transformations and plasmid preps for the chosen parts. For our transformations we had two of our Anderson Constitutive promoters grow red colonies. When we did plasmid preps however they did grow in the LB and AMP solution. These parts had concentrations values ranging from 9.6 to 56.6 ng/microliter. In the meanwhile, Alberto and Margeaux cut and ligated more GFP and terminator B0015.

Red Colonies for Anderson Promoters
QiaCube
Plasmid Preps

Timeline

Week 6/19-6/24 Create the various constructs using the parts we have finally made plasmid preps of using GFP. Once we can prove that the construct in fact worked we will test them using the RFP, EYFP, and BFP. This way we will know how to order the various fluorescent proteins using various promoters and RBS.

Week 6/27-7/1 Figure out how to use invertases and figure out how to incorporate them into our various constructs. Trouble shoot any problems we run in to and fix them. Then we can try to flip the gene with the invertase and see if it actually works.

Week 7/4-7/15 Start to organize all the parts in the order in which the comp team has chosen to build them. It will be our task to figure out how the part will work together and what we will need in order to allow the process we want it to do to happen.

Week 7/15-8/1 Finish up the desired construct and possibly explore other forms using the TB gene.

Week 6/20/11-6/24/11

Performed a restriction digest on:

1. EYFP
2. BFP
3. ECFP
4. RBS: BBa_J61124
5. RBS: BBa_J61100
6. GFP and terminator
7. YFPc
8. GFPc
9. promotor: BBa_R2000.  

Unfortunately, as I had not used the Qiacube I ended up throwing out the gel extractions of these parts. Therefore, the parts had to be redone. However, from the gel we observed that the EYFP and ECFP were in fact cut in the restriction digest. Unfortunately, it did not seem like our GFP plus terminator worked. We could have better adjusted if we had negative controls with the uncut parts. The next morning we transformed:

1. Ptet which is BBa_R0040 in an AMP plate 
2. GFP BBa_J52028 on a KAN plate 

A restriction digest was also preformed on RFP, Pbad, Pcat, Terminator B0015, E0240, and E0430. A plasmid prep was then done on RBS: J61101, constitutive promoter: R2000, YFPc, and GFPc. These were incubated for about 12 hours. The next morning we made more plasmid preps on BFP, RFP, EYFP, ECFP, and finally pTEt. I preformed an mini prep using the Qiacube on the last 5 parts. I was required to centrifuge the 2ml of overnight cultures for 3 mintues for 8,000rpm then remove the supernatent. We ended having good values for the mini preps. Finally, friday the liquid handling robot was suppose to perform a restriction digest on GFP J52028 but was not able to as it could not pipet fractions. This brought the project back but allowed for more bugs to be fixed.

Week 6/27/11-7/1/11

Restriction Digest of Ptet, Pcat, and Terminator
1. Cut constitutive promoter: Pcat: BBa_I14053
2. Cut constitutive promoter: Pcat: BBa_I14053
3. Cut constitutive promoter: Ptet: BBa_R0040.1
4. Cut constitutive promoter: Ptet: BBa_R0040.1
5. Uncut constitutive promoter: Ptet: BBa_R0040.1
6. Cut Terminator: BBa_B0015
7. Cut Terminator: BBa_B0015
8. Uncut Terminator: BBa_B0015

I did a restriction digest on Pcat, Ptet, and another terminator. For this procedure we doubled the amount of enzymes in order to better our results. During the restriction digest I had to incubate the cells 20 extra minutes in the 37 degree and then it was placed in the pcr machine. The bands were very unclear and we were not certain if the plasmids were cut as we did not have enough control. This mistake allowed us to realize that a control is essential as the cut promoters did not differ very much from the uncut plasmid in the number of base pairs. Also, our ladder was very bright compared to the bands and we were informed by Traci that it was the result of it being too concentrated. After cutting the bands out I had to do 3 of the gel extraction by hand. There was not enough space in the qiacube so we did one of each part in the cube and the doubles on the bench.

Restriction Digest of GFP
1. Uncut GFP: BBa_J52028
2. Cut GFP manual:  BBa_J52028.2
3. Cut GFP Robot 1: BBa_J52028.2
4. Cut GFP Robot 2: BBa_J52028.2
5. Cut GFP Robot 3: BBa_J52028.2
6. Cut Terminator: BBa_B0015
7. Uncut Terminator: BBa_B0015

After fixing the issues we had with our procedures we decided to move on and do a restriction digest using our liquid handling robot. It was important to use the same liquid cultures in order to eliminate any variables other then performing the RD by hand or by the robot. Three of the restriction digests were done on the robot in order to make sure the same process could be repeated. I also did a restriction digest on a terminator so the robot could later ligate the GFP with the terminator. In order to cut the GFP we used EcoRI and SpeI while for the terminator I used EcoRI and Xbal. After running the gel, it could be seen that the GFP was cut as it was about 1.2KB on the gel. However, while loading the gel I realized that some of the RD done by the robot had a total volumes less than 50 micro-liters.

7/5/11-7/8/11

In order to continue on with ligation on the robot I decided to do a manual ligation with GFP and a terminator. I used the new protocol which involved a 6 to 1 ratio and a ligation time of 11 hours. Unfortunately, when they were plated nothing grew. This was our final trial with our ligation protocol. This backup restricted us form continuing forward. Therefore, I decided to run the rest of the cut GFP and terminator that I had after doing a restriction digest with the robot and I. After doing a gel extraction and a Nanodrop Quantification I received similar values as the one form the previous week. This was a good sign as they were all from the same colony. However, the first robot trial had a very low yield and it may have been that the robot did a better job at doing the restriction digest for each trial. The next morning I did mini preps on:

1. R0040.A
2. R0040.B
3. R2000.B
4. R2000.D
5. J23100.C
6. R20000.A

While doing this preps we noticed that the J23100 constitutive promoter had a red liquid culture. This was very exciting as this part did have RFP and should be red. Also during the mini prep the red pellets were also a good indicator that we grew the correct gene. When we finished the mini prep we did a nanodrop quantification and got great values for the Anderson Constitutive promoter J23100.

Red Colonies for Anderson Promoters
Red cell pellets for BBa_J23100 after being centrifuged
Plasmid prep of BBa_J23100

7/11-7/15

I performed RD this week for various parts. As we still haven't gotten a continuously successful ligation, but have been using a lot of our cut parts we decided to restock. I performed a RD on:

1. BBa_E0240 GFPc
2. BBa_E1010 RFP
3. BBa_I14033 Pcat
4. BBa_K156010 BFP
5. BBa_J52028 GFP

After running the gel it could be seen that the right parts were cut for each RD however the bands were very dull. After doing a gel extraction, I received very low DNA quantification values. All were below 10ng/ul. As the values were so low I reran the samples to make sure that there was in fact DNA. After doing the checks, I verified that there was DNA. However, my values were still very low so I decided to do some more RD with the same parts and to add a larger volume to each well when running the gel. I doubled the amount hoping for a higher concentration value. Unfortunately, doubling the volume did not affect the concentration values. The next day as ligation were still not working I worked on perfecting RD. For our restriction digest various buffers allowed for the cutting of the desired part. However, the buffers we were given were not consistent and as BFP did not cut completely when Buffer 2 was used for 1 hour I decided to test different combinations. The combinations were:

1. Buffer 4 for 2 hours
2. Buffer 4 for 4 hours
3. Buffer EcoRI for 1 hour
4. Buffer 2 for 2 hours
Restriction digest on BFP with different Buffers
 1. BFP.1 uncut   
 2. BFP.1 Buffer 4, 2 hours
 3. BFP.1 Buffer 4, 2 hours
 4. BFP.1 Buffer 4, 4 hours
 5. BFP.1 Buffer 4, 4 hours
 6. BFP.1 EcoRI Buffer, 1 hour
 7. BFP.1 EcoRI Buffer, 1 hour
 8. BFP.1 Buffer 2, 2 hours
 9. BFP.1 Buffer 2, 2 hours
10. BFP.2 uncut   
11. BFP.2 Buffer 4, 2 hours
12. BFP.2 Buffer 4, 2 hours
13. BFP.2 Buffer 4, 4 hours
14. BFP.2 Buffer 4, 4 hours
15. BFP.2 EcoRI Buffer, 1 hour
16. BFP.2 EcoRI Buffer, 1 hour
17. BFP.2 Buffer 2, 2 hours
18. BFP.2 Buffer 2, 2 hours

It can be seen that all the buffers allowed for the BFP insert to be cut however, EcoRI Buffer had three bands as it did both a single and double cut. Therefore, 1 hour is not sufficient to properly cut the BFP. For the first BFP concentration had its brightest band for Buffer 2. However, for the BFP with the higher concentration had the brightest band for Buffer 4 at 2 hours. Afterwards, I did a gel extraction and found the concentration values. Unfortunately the values were very low so I decided to mix together the BFPs.

Week 7/18-7/22

In order to continue where I left off from the previous week I decided to do an ethanol precipitation in order to increase the total concentration. As I was finally ready to do ligations I did it using our old TOP 10 competent cells and then I did a 1:3 ratio and 1:2 ratio of RFPc and Pcat. The ligations were transformed but they did not grow the next morning. However, Alberto's cells did grow when he used the alpha competent cells our post doc Traci had bought. There were many colonies and we were certain that this was a positive outcome. Therefore, I did ligations of GFP with terminator and RFP with terminator. Thankfully, the next morning most of the ligations that were made grew with many colonies. We can now continue forward and try ligations on the robot.


Wet Lab Protocols

These are the downloadable protocols used by the BU Wet Lab team, written in Excel 2003 format (*.xls).

Transformation

Ligation

Restriction Digest

Miniprep

Gel Extraction

Media Preparation

NanoDrop DNA Quantification

Competent Cells